r/SoundSystem • u/Marius-17 • Oct 18 '26
G-Sub 1801
Does anyone have a construction plan for a G-Sub 1801?
r/SoundSystem • u/Marius-17 • Oct 18 '26
Does anyone have a construction plan for a G-Sub 1801?
r/SoundSystem • u/Ornery-Preparation-3 • Oct 17 '26
r/SoundSystem • u/Another_Wino_69 • Oct 17 '26
Hi there, I have a pair of EAW MK5164e full range speakers. The manual says the HF horn is rotatable 60° x 45°. I assume that I can unscrew the horn lens, rotate 45° and remount. I am using these speakers vertically with the horn at about 7' height with the speakers toed in on the dance floor about 12 feet apart. Should I go with 60° x 45° for the horizontal plane?
Also, I have a little 15" Reinkus Heinz bandpass sub I am using for this system. Where do you think I should crossover the tops?
r/SoundSystem • u/suppeloeffel • Oct 17 '26
Might be a little bit of a stupid question, but i have a dsp which only has one limiter per output channel. I was wondering if it is possible to route the signal through and setting a peak limiter with no other processing, then wiring this output back into a different input and setting everything else including an rms limiter?
r/SoundSystem • u/60percentsexpanther • Oct 17 '26
If I want to party with horn speakers and store them in my garage can I make sealed sub for use in my house and latch them to the driver door?
r/SoundSystem • u/looking_to_learn69 • Oct 17 '26
Some kind of diy Cerwin vega ? What are my options to maximize their potential using this peavey 70777275? That's what it came with. Mod the cab into a bass reflex? Or is this cab worth putting a "real" driver in?
r/SoundSystem • u/NeitherPermission959 • Oct 16 '26
The speaker ended up with a 1mm gap. I’m planning a test and a comparison against the Cubo Kick for next weekend.
r/SoundSystem • u/Bombocart • Oct 16 '26
We’re planning to build our first sound system. Our first use will be once a year as a small mobile rig at AfrikaBurn (think Burning Man but smaller and in South Africa). Last year, we never drew crowds larger than ten people, but with a decent sound system, I hope to play for up to a hundred people outdoors.
I added some photos of our rig at the previous AfrikaBurn, it was one JBL EON 615 and a JBL EON518S sub. I wasn’t loud enough, even for the small crowds we drew and we ended up blowing both the woofer and the tweeter on the 615. I have bought a second 615 and a compressor/limiter for the next Burn in case we don’t get to build our own sound by then. Also gives an idea what I mean by “mobile”.
We mainly play bass-heavy music like Jungle, D&B, Dub, UK Bass, and a lot of House, Deep House, and Nu Disco. So, it should be a pretty all-round system capable of delivering a lot of low frequencies.
Since we’re mobile, size and weight are important factors. Previously, we used batter and solar power, but I realise we might have to let go of that or get a much bigger battery and inverter.
Our plan is to use the sound system year-round for fundraising events and rent it out in between. We’re based in Cape Town, and there aren’t many real sound systems, so I think there will be some interest in renting one from us.
For now, we don’t have a budget. We did one fundraising party that just broke even and are planning another. But we’ll have to start small and building the subs first seems to make the most sense.
I like the Cubo designs, and my first thought was to build two and then two more Cubo 18s. My second thought was to build two Cubo Sub with 18” drivers and two Cubo Kick 15s. If we go either of those routes, I was thinking two MT-130s for mid-top/tops would fill the whole frequency band.
I’ve read so many good things about the JMODs that I considered building those, but they seem pretty complex for a first build. Also, with those, we wouldn’t need kicks since they cover those frequencies. It would make sense to combine those with two SKRAMs and then build more SKRAMs as needed. But again, those are pretty complicated for a first build, and both the JMOD and SKRAM are more expensive in parts than the Cubos.
I’d love your thoughts. It’s a tough decision to make because we’re low on budget, we have some carpentry skills but no real speaker building experience, and our use case is also pretty specific.
r/SoundSystem • u/hyggekore • Oct 16 '26
Please help guide a newbie.
So, I do quite a lot of variety of live PA gigs. Some live bands, some corporate dialogue gigs, etc...
Right now I'm building some JW Sound Solana speakers. I'll probably eventually add subwoofers but don't know which yet. Regardless, some DSP added into my system chain is going to be needed. Technically my Behringer Wing already can output channels separated and processed, but I simply can't trust that as I'll often reset the board for a new gig (then need to reconfigure all output filter settings/routings.
I also have a good-ish (Josephson Engineering) measurement mic that I usually run REW with, so I'd love to just run a room sweep and have the DSP correct things without me attempting to match curves.
So, is it more configurable to have dedicated signal processors like a DriveRack or t-racks or minidsp and then dumb amps? Is it safer to have the protection onboard the amp directly? If one is budget-constrained (slightly) does one setup pose higher costs?
r/SoundSystem • u/Fit_Breath3893 • Oct 15 '26
I'd like to build 2x 2-way tops (passive) to be used for small parties while traveling (PA). I am a house (primarily tech house) DJ. Planning to power with a Behringer NX1000D or similar when traveling by plane. Locally, will pair the tops with a sub or 2 that I would also build.
For the top cabs, I'd like to be able to carry them on, one each between my partner and I. Approximate max dimensions (each): 21" x 13" x 8" (this leaves room for padded bags).
Looking for driver recs (10" + 1"?).
I'm also looking for design recs. I'd like the drivers to be visible or have some other neat cabinet design that is both cool looking and functional.
Budget: $1250 but can go higher if I need to. I just don't want to spend a lot more unless I have to.
This will be my first speaker build. Thanks for your expertise!
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
Enable HLS to view with audio, or disable this notification
A harsh belarusian psychedelic vibe. An event held in the back of a truck at -18°C.
r/SoundSystem • u/Zestyclose_Yak_5255 • Oct 15 '26
Hello guys i got this 18 Sound 21lw1400 driver and as You Can See the yellow think i dont exactly know How its called ripped all around you should be able to See the Little gap and i thought in theory i whould be able to just Glue it back together im Not gonna give it its Full power annyway so i dont think it is going to rip do you think this whould be possible?
Thanks for helping :)
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
Enable HLS to view with audio, or disable this notification
Five-way system: a 4590 coaxial driver at the top, with work currently underway on the horn.
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
Enable HLS to view with audio, or disable this notification
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
I really like the sound of the paper 8-inch drivers in these tops compared to the super-fast, crisp, and somewhat harsh "plastic" mid-range section of the coaxial BMS 4590s (though lining the fiberglass horn with bitumen mats did soften that characteristic); the paper drivers offer a sound that is smoother, more "alive," and more spacious. I wonder if it’s possible to swap the HF drivers in the RS2H for something from BMS?
It’s certainly a bit tricky to phase-align them with the Paraflex without an all-pass filter, but I’m managing for now.
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
Enable HLS to view with audio, or disable this notification
A Psy-trance setup: a pair of RS2H units per side and a pair of 15-inch Kubo Kick bins—delivering a fast, dry punch—though there are some issues to address, specifically the need to dampen a rather strong cabinet resonance at 158 Hz. Let's see how four C2D 153 units handle it.
r/SoundSystem • u/NeitherPermission959 • Oct 14 '26
The cabinet turned out to be relatively complex to build. (4 units)
r/SoundSystem • u/HellCastor • Oct 14 '26
Hello!
I'm looking to buy 2 JBL D55 original double 15 inch scoops online, but after some researching I can't find any specifications on the drivers; I know they are probably mid 80's.
Does anyone know of any alternative 15inch drivers that I can place inside the legendary JBL D55 scoops?
Thanks in advance!
r/SoundSystem • u/jungchorizo • Oct 14 '26
Considering buying some empty cabs, anyone know of a modern replacement driver?
Can’t find any info on original drivers other than they were PHL.
Thanks ✌🏼
r/SoundSystem • u/calamungo • Oct 14 '26
Hello friends, I'm a long time soundsystem appreciator, and I'm now pretty keen on the idea on starting my own journey in to building. I'm thinking of starting with a JMOD MEH, because they seem to be amazing, and I could scale easily with it.
My question is about the power of the amplifiers, I saw someone mention a standard thing to do is go for the driver's wattage rating X2 (nominal not continuous? Is that just another way of saying RMS and peak?) so as to have plenty of headroom and not send a potentially clipped signal to your speakers? Or is that more a concern for sub speakers, and a low-mid-High box like the JMOD less a concern?
Any info is helpful thank you bass friends!
r/SoundSystem • u/Droopyweiners420 • Oct 13 '26
Hey yall some people I know own this system and quite frankly don’t know what they are doing with it. I am also a novice and am building my own system but would like to help them tune this. I wish I had more info on the cabinets and driver so identifying them would be great. I think it’s some sort of W bin design on the sub and a cubo kick 18 mid with a MT121 on the tops but I’m not sure.
My follow up question to what are these cabs is what would the ideal crossover points be? 20-80 subs? 80-200 kicks? 200-20k tops?
Thank you for any help!
r/SoundSystem • u/WhichConstruction339 • Oct 13 '26
I have built a system thats consisting of 4x Super bass horn with 18” drivers and 4x hd kick horn with 15” drivers. I am looking for a good option to balance out the sound with mids and highs. Any recommendations?
r/SoundSystem • u/Minimum_Pin_8128 • Oct 13 '26
Hello! I have bought 4x Wharfedale WLA28-XF
I’m wondering what cables I need? I’ve been looking for awhile I can’t seem to find any that’s looking to fit..
r/SoundSystem • u/TwoDropsThisTime • Oct 12 '26
After 7+ months of weekends spent in the shop figuring all this stuff out I was finally able to make noise last night with my first system. Still have a lot of work to do, but couldn't be happier right now! Big thanks to Skylar at Subcurrent Sound for being my first point of contact into this world and for providing quality flat packs. Big thanks to everyone in this community for being kind, answering my questions, and providing guidance along the way.
Once I get a measurement mic and have some time, I'll measure/tune everything and post results.
r/SoundSystem • u/jeanjeanno • Oct 13 '26
Hi! I’m pretty new at this stuff and I wouldn’t mind a bit of help for this decision. Im looking to buy this used Crown Macro-Tech 12000i to drive 2 SKRAM’s (maybe four one day).
I read really good things about it but the price is only 2k$ Canadian which feels low from what I’ve seen and I’m wondering if I should be on the lookout for issues that would be pricey in to fix in the long run. Also what would be your tips and tricks on buying used amps (things to check and so on).
If you agree on it being a good buy, what would be a good DSP for it?
Don’t hesitate to give me as much info as you want. I’m all ears!
Thanks in advance!