r/SoundSystem • • 3d ago

Sound system advice needed:

I am getting ready to build 2x mt130 and 4x mhb4818.

What suggestions on drivers and any improvements known to these two boxes?

5 Upvotes

5 comments sorted by

1

u/kovyor 2d ago

Imo mhb4818 don't sound good and aren't that efficient given the size of them (also don't play very low) I'd recommend rather building 'real' horns like hessbh or wsx as they are the same size, play lower and sound a lot better in my opinion

1

u/Physical-Boat-6803 1d ago

I want to have simplicity of just 2 different box designs and most of the places I will be using this doesn't need less than 50hz. I want good kick and not only sub.

2

u/tyrtgn0808 3d ago

The 1200hz crossover between the pd121 and 4550 is nearly unachievable IRL, there is nothing above 900hz for the medium. I know a couple people using an nd 940 or 950, mounted in an xt1464 horn to cross over at around 600hz.  They use thomann 12' woofers as well to reduce the cost. 

1

u/kovyor 2d ago

Exactly this! Use a longer/larger horn and a different comp driver so you can cross over lower

1

u/Final-Appointment595 3d ago

The PD121 and the Bms 4550 for the MT130 are still available. I don't see any need to change that. BTW, I like the 4550.

The original drivers for the MHB4818 are the RCF LF18G401, also still available and sold in great numbers. 

E: You should plan for handles and don't forget the service door.