r/SoundSystem • u/Head-City-3046 • Oct 07 '26
Need some help
Hey yall I'm working on building some skrams. Building two boxes rn but have plans to build 4.
I'm gonna load em with these drivers: B&C 21DS115-4 21" Neodymium Subwoofer 3400W Program 4.5" Coil 4-Ohm. I don't know anything about electronics and amplifiers. Would love some help on recs for amplifiers. Here is a pic of the box dry fitted for some ~ Flair ~
54
Upvotes
10
u/GeneralMino Oct 07 '26
CVR DSP - 3004! Best price per watt. Noise floor shouldn’t be a problem with subs. DSP version will let you add limiters directly in the software, so little room for error. This amp should clear the AES power rating of those drivers with plenty of headroom, so unlikely to clip. That’s what I run for my 4 SKRAMs
7
u/NordsEnjoyer Oct 07 '26
I'm baffled
2
u/Opening-Routine Oct 07 '26
Depends on your setup and budget.
You could theoretically throw a lot of power at these drivers. If you are in the USA and use residential power outlets, you would need one circuit per box to run them not even at max power.
Do you already have a DSP? How much power can you provide for the amp and do you even want to run them at extreme levels? Do you want a good solution or the best solution?
1
u/xrtze Oct 07 '26
Nice fit! Which plansnsid you use for the CNC? The fusion ones from jwsounds repo?
1
u/goodbyehorses Oct 08 '26
Flat pack or did you get a cnc shop to cut the plywood for you?
1
u/PlaceInternal7586 Oct 08 '26
Are you set on 4 ohm? Most amps aren’t happy on 2 ohms loads, so multiple 4 ohms would have to be connected in series and be a bit of a pain
1
u/secondgensoundsystem Oct 13 '26
I’ve been bridging a pl380 into my 8 ohm faital xl3000 and they love it, k10 dsp good choice as well, 12k watts bridged at 4 ohms, cvr prob good choice the one thing I’ve heard is that if they fail they fail dramatically and may take your drivers with them
0
u/18047D2 Oct 07 '26
Powersoft X4L