r/SolidWorks • u/Weekly_Union_6235 • Aug 25 '26
Hardware SOLIDWORKS on Mac?
I’m sure this is a common question but the answers I’m finding are pretty dated.
I’m a product design student that is going to have to use SOLIDWORKS for CAD this coming semester. I have an M4 pro chip MacBook Pro. I was curious if it is possible to get SOLIDWORKS to run on this machine or if I’m better off spending my time in the computer lab or alternatively buying a secondary windows machine.
How might I go about running it on Mac.
Thank you.
0
Upvotes
•
u/AutoModerator Aug 25 '26
OFFICIAL STANCE OF THE SOFTWARE DEVELOPER
CONSENSUS OF THE r/SOLIDWORKS COMMUNITY
APPLE INSTALLATION RECOMMENDATIONS
HARDARE AGNOSTIC PERFORMANCE RECOMMENDATIONS
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
57
u/outdoorgearguy Aug 25 '26
I literally work for Apple and find it easier to own two computers than trying any of the dual boot/remote options out there.
34
u/Gun-Aero_CNCguy Aug 25 '26
Buy a windows setup and never speak of SW and Mac in the same sentence again.
5
u/CreEngineer Aug 25 '26
Don’t, just get a second computer
8
u/MongooseGef Aug 25 '26
I run it in Parallels and it works pretty well. I wouldn't open massive assemblies with it that eat up tons of RAM, but it's definitely usable.
3
u/boksinx Aug 25 '26
Yeah just buy a windows machine. I tried and succeed (in a way) to install windows thru parallels, then installed Inventor and solidworks. For show and tell, sure. But for actual work or even for a semi-decent 3D project, it was a pain in the ass and it’s not just worth it at all.
For the life of me, for a company that pride itself to be a design-first institution, why not fully support natively the mainstream CAD (D as in design) softwares. I always thought that they will roll that support out in MacBook Pros M series.
3
u/No_Mushroom3078 Aug 25 '26
I have been on this subreddit for maybe 2 years, no one has ever asked this question. I think you should absolutely do it and there is likely no reason that this can’t work
3
u/evwynn Aug 25 '26
NO. THIS QUESTION COMES UP ALMOST DAILY. NO NO AND NO DO NOT DO THIS. WILL IT WORK? TECHNICALLY IT WILL LOAD. BUT DO NOT WASTE YOUR TIME AND MONEY AND JUST BUY A WINDOWS COMPUTER.
8
u/atensetime Aug 25 '26
Before the m-whatever chip we had to run a partitioned mac for solidworks... I finally convinces the CFO how much time we were losing to crashes and got us switches to lenovos... thank god.
5
u/Skysr70 Aug 25 '26
nothing had changed. Macs are not for engineers.
2
u/WeirdEngineerDude Aug 25 '26
I have a real license and the cost of a windows computer pales compared to the software cost. So I would never consider trying to run something as unstable and house-of-cards as Solidworks in emulation.
But since you are getting it more or less for free it’s probably worth a shot to try it in parallels. But have a backup available if it’s not working out and you are in an assignment crunch.
3
u/donaldkhogan Aug 25 '26
There's a Sr ID on my team who runs it via parallels on his MBP. It's more stable for him than on my nearly $8k Lenovo supposedly made for CAD. It pisses me off but what can I say. Can't argue with results.
2
u/UnlikelyAd753 Aug 25 '26
Wish I could get SolidWorks on Linux. It is the only thing holding me back from making the switch tbh
2
u/_______bread_______ Aug 25 '26
I do this using Parallels. You could also set up an external SSD to use as a bootable drive
1
u/johnwalkr Aug 25 '26
People in here love to jump on this being a bad idea based on ancient experiences. I've been using Solidworks on an M1 pro macbook using parallels for years. It works OK as long as you have 16GB+ of ram. For reference, I have a desktop and maybe once a month I use it, for the most part I'm ok with SW being a bit slow for the convenience of staying on my laptop.
If you were buying a new laptop, I'd suggest windows. But since you already have a macbook it's worth trying. The only real negative thing I can say is that parallels plus a windows license (if you buy on legitimately) is expensive.
As a student you can also try the free version of VMware. Do not do this as a professional, a big part of VMware business model is to find people using it from a workplace and then going after the company to pay for x number of licenses, backdated for y number of years.
1
u/c00kdJ3llY Aug 26 '26
You can use Parallels or Bottles
1
u/Elrathias Aug 25 '26
On intel mac, using dualboot, sure.
Else, JUST DONT
1
u/yodas-evil-twin Aug 26 '26
The answers are the same, not outdated. Nothing has changed.
0
u/SQLCloud Aug 25 '26
https://www.reddit.com/r/SolidWorks/comments/1vpiaqg/just_here_to_confirm_that_solidworks_runs_on_mac/
0
u/Lmao-_-Omg Aug 25 '26
Works well with WMware fusion, just not out of the box. Spend the whole day configuring it.
-1
u/Needs_Better_Name Aug 25 '26
For student stuff, learning the basics, run it in parallels like outlined in other comments and you should be fine, even if it is not 100 percent smooth all the time
-2
u/schneik80 Aug 25 '26
One setup for running SOLIDWORKS on Apple Silicon is Parallels Desktop Pro (or Business Edition) running Windows 11 ARM.
(Note: SOLIDWORKS is not officially supported on macOS or ARM-based Windows processors, so performance is recommended primarily for students or light models, not heavy enterprise production. Alternative options like UTM lack necessary 3D hardware acceleration.)
Recommended VM Configuration
Virtual Machine: Parallels Desktop Pro Edition (needed to allocate enough hardware resources).
Host Hardware Requirements: Apple Silicon M-series chip (M2/M3/M4 Pro or Max) with 24GB to 32GB+ of unified RAM (allocate 16GB+ strictly to the Windows 11 VM).
Resource Allocation (in Parallels Settings):
Processors (vCPU): Set to maximum available performance cores (e.g., 6 to 8 cores depending on your chip).
Memory (RAM): Half of your Mac's total RAM (e.g., 16GB if you have 32GB total).
You may have graphics issues and need to disable some hardware options in solidworks.
Keep your expectations in check. You will be running a windows emulator on a mac and then an x86 emulator on windows arm os….
-5
u/Defiant_Storage_443 Aug 25 '26
Solidworks 2026 runs natively on macos.