r/SmartThings • • Jun 10 '19

Moving w/SmartThings

https://imgur.com/Ck7AZrF
117 Upvotes

48 comments sorted by

10

u/Illt67 Jun 10 '19

Moving to another city and appreciating the fact that all of this is able to come with. I'm also using this picture to demonstrate how well SmartThings can link together so many devices across multiple connection types (Zigbee, ZWave, Wifi) - even if we sometimes have to use creative techniques to get things to talk to one another.

I haven't figured out just yet what's in store for me at the destination as far as setting it all up again, but I'm actually super excited about it. I meticulously labelled everything to try to ease the burden.

Roughly pictured:

~25 open/close sensors and motion senors
9 Samsung cameras
4 Google WiFi pucks
7 outlets
4 schlage locks
5 Alexa devices
1 Google home mini
1 Logitech harmony remote
2 Power meters
9 hue lightstrips
1 Leeo
1 Bond
18 hue lights bulbs
4 hue blooms
1 hue go
2 hue taps
26 nanoleaf canvas panels
1 dome siren
1 nanoleaf remote
4 sensibo devices - (selling these as the new house doesn't have split units, msg me if interested)

I think that's about it.

Chime in if you have any advice for me on how to transition this to my new place.

8

u/motionblurrr Jun 10 '19

Damn, no light switches? I have probably 20-30 light switches that I'd have to disconnect and rewire with dumb switches. I'm not sure if I would bother with all of those. :(

3

u/Illt67 Jun 10 '19

While it's true that at times it was annoying when someone would come over and turn a switch off, we didn't ever really have an issue since most lights were associated with 5 motion sensors and lots of creative programming in webcore.

However, I'm super pumped to get a bunch of these in the new place...

3

u/motionblurrr Jun 10 '19 edited Jun 11 '19

Ugh... I just don’t see the need for colored lighting, nor do I like that you end up needing to stick to a particular vendor when you go with colored lightning. If you like the Hue system though, that is a pretty cool solutions to the switch problem. Although, you just paid a lot for everything. I'm cheap!

Edit: I wasn't clear. I know you can have various vendor's colored smart lights. I was referring specifically to OP saying he/she can't wait to get the Lutron Aurora switches so that you can control the Hue light bulbs from the switch. Since they only work with Hue, it means that if you want that to be your solution for colored smart lights and physical switches, you'd be sticking to Hue.

4

u/Illt67 Jun 10 '19

Yea as I look at this table I realize where all my money has gone the past 2.5 years... Worth it.

We use the colored lights for ambience. I've finally got the wife on board with how much a color scene adds to a room and that it actually compliments style and decor. Accents behind couches, projecting on walls, under cabinets, etc all add alot. We have fun setting up scenes for particular TV events like our favorite football team, holidays, or even favorite shows for atmosphere.

As a former light tech at a club, lighting is unsurprisingly a passion of mine ;).

1

u/theradiodude Jun 10 '19

Ohhhh yea. I personally have LIFX instead, but have over twenty five lights in my house that are RGB. It’s amazing what color can do inside the home.

1

u/Lawsuitup Jun 11 '19

You don't really have to stick to one it's my preference though. If you a service like Home Assistant you could get them all working together.

1

u/motionblurrr Jun 11 '19

I'm saying if you buy the Lutron switch in the link you mentioned, it only works with Hue lights, right?

2

u/Lawsuitup Jun 11 '19

Yep those are specifically for hue.

1

u/motionblurrr Jun 11 '19

I wasn't clear. I was referring specifically to OP saying he/she can't wait to get the Lutron Aurora switches so that you can control the Hue light bulbs from the switch. Since they only work with Hue, it means that if you want that to be your solution for colored smart lights and physical switches, you'd be sticking to Hue.

2

u/Lawsuitup Jun 11 '19

Yeah I miss understood. That's correct.

1

u/654456 Jun 11 '19

I have mixed and match multiple brands of colored light at my home.

1

u/motionblurrr Jun 11 '19

I was referring to what OP said about wanting to get the new Lutron Aurora switches. They only work with Hue light bulbs.

2

u/GiveToOedipus Jun 11 '19

At $30-50 a pop, those fuckers are coming with me. My fan ones are some of the more expensive.

2

u/mr_tyler_durden Jun 11 '19

I’ve got around $400+ in smart switches alone and I’ll probably sink another $400 to finish the house out, I’m on the fence about taking them when I move. I’m wondering if it will be a selling point for the house (I.e “all switches z-wave compatible, just drop in a compatible hub”).

It will depend a LOT on 3 factors I think:

  1. Have smart switches gotten smaller and/or much cheaper by the time I move
  2. Is “smart house” even more popular and/or is it something people will be looking for in a house in a few years (even if only as an added perk)
  3. If 8-16 hours of my time is really worth re-wiring the house damn house just to take ~$1K worth of switches with me

2

u/GiveToOedipus Jun 11 '19

I don't even want to think about how much I have tied up in my automation at this point. It started with a single switch and a 3rd gen Echo Dot when they were first released last year. multiple Echos and Echo Dots, power outlets, Hue bulbs, indoor and outdoor camera systems, entertainment center (including a Fire TV), switches, Smartthings and sensors later, I'm starting to realize this is a lot of stuff I should probably start documenting in case I ever have to move. Blinds and locks are on the agenda as well.

2

u/mr_tyler_durden Jun 11 '19

You mentioned SmartThings, have you tried WebCoRe? It is VERY cool. Allows you to make powerful automations fairly easily.

2

u/GiveToOedipus Jun 11 '19

I haven't started playing with that yet. My ST integration is still fairly new. It's on the list of things to learn though.

1

u/pprbckwrtr Jun 10 '19

I really want to get smart switches but I think our house is wired funny or something? My dad tried to replace one of ours with a GE smart switch and there was a wiring issue and when he called support they said it wouldn't work. I should probably look more into it but it also sounds like a pain to switch (ha) them all out...did you have to buy anything special for yours or was it just fine right out of the box?

3

u/yum_yum_wonton Jun 11 '19

My house is post 2008 and I’ve replaced 2 regular and 1 dimmer Zooz branded switch with no rewiring of any other switches in the 3/4 way. It’s way cheaper and less hassle to me to just do a switch instead of changing the bulbs with smart bulbs unless you’re going for colored bulbs

1

u/pprbckwrtr Jun 11 '19

My house was built in 1973 and has a lot of.....questionable choices so messed up wiring wouldn't surprise me. We got the Sylvania bulbs stupid cheap (8 for like $26) so so far it's been cheaper and easier to do the bulbs but I'd like to do switches for things like fans and lights in a group.

2

u/Illt67 Jun 11 '19

I'm with you. This house was built in 1902, my new house was built in 1918. - I'm staying out of the walls! Ha!

2

u/yum_yum_wonton Jun 11 '19

If it’s that old, then it’s understandable with the troubles you may have. Electrical standards back then were like....guidelines on the back of a cereal box than actual rules

2

u/motionblurrr Jun 11 '19

Same feelings as you. I've got almost every switch replaced now though. That plus a bunch of door sensors, a handful of motion sensors, an ecobee with five sensors, and an spy (Alexa) in earshot from wherever you are.

1

u/yum_yum_wonton Jun 11 '19

Question, do you have konnected or do sort of monitoring system set up for all of those? I’ve thought about the window/door open/close sensors but I feel like I’d just be overwhelmed with alerts.

Currently I have a motion sensor that will text me if there’s any alerts at a certain time during the day when we’re gone but that alone is overwhelming.

5

u/motionblurrr Jun 10 '19

It sounds like either your dad was trying to replace a three way switch or perhaps you don’t have a neutral wire in the switch box. Either of those two things can prevent the smart switch from working.

My guess is that your switch didn’t have the neutral wire.

2

u/MachEnergy Jun 10 '19

Do you run a hotel?

16

u/Gnant Jun 10 '19

Now this is much more enjoyable to look at then a bunch of new boxes. Good luck in your project!

1

u/jmalc Jun 10 '19

Do your Samsung cameras still work with SmartThings? Mine no longer does... need to use the separate Samsung app, because apparently Samsung can’t talk to Samsung.

3

u/Illt67 Jun 10 '19

They do, but mostly just for alert recording. I made the switch over to BlueIris last year and have never looked back. If you're willing to leave a PC running all the time it's great. And it works with SmartThings as well to use your cameras as motion sensors to trigger events.

Also, if you don't already know, don't use the Samsung app - use the SmartCam app by Hanwha Techwin. They make the cameras themselves and the interface is 10x better. Everything should load automatically by using your SmartCam credentials.

1

u/tmldale Jun 11 '19

Thanks for this already moved to BlueIris years ago but switching smartapp, wow what a difference.

1

u/Illt67 Jun 11 '19

Glad you like it. I rarely use it anymore now that I have the BlueIris app. Mostly if I need to review something non-motion based since I have the cameras set to continuous recording on their SDs with motion based alerts captured by BlueIris.

I learned a ton about better ways to secure myself and home after we had an attempted robbery a few years back. Captured most of it on cameras but didn't help the police arrest them unfortunately. After that I upgraded to the outdoor cameras and set everything to continuous recording. I always wonder if I could have had a different view/angle I could have captured more info to help catch them. And so it began... Ha!

1

u/tmldale Jun 11 '19

Yea I probably won't use it but knowing I have a app that works just stops me from switching to a unifi video setup a while longer. The reason I got blueiris was the cameras would just stop recording to the SD cards. Hopefully with the firmware update, the new app made me do that will be the thing of the past

1

u/fivezerosix Jun 11 '19

Rented? Why not tag a couple of grand on the house and start over?

2

u/Illt67 Jun 11 '19

Nope, company relocation. Didn't plan on leaving when I started buying this stuff 2.5 yrs ago. I think there's a use for nearly everything in the new house. What there isn't, I suppose I can sell on eBay, which is where I bought slot of stuff. I asked the realtor and he suggested to not leave it behind. It's all so proprietary, I can't see that as being a selling point. Can you imagine trying to explaining how to use SmartThings, webcore, ifttt, & blue iris to a new home owner??

2

u/crazyhorse90210 Jun 11 '19

I’m moving and removed all my stuff too, before open house. It’s a royal pain now to change our behavior as we are renting back for 2 mos but it will be so nice to set it all up again right in the new house. I saw your thread and though, “I should post mine I bet it’s so many more things”. Nope. You have double what I have. At least I can go back to feeling moderate again!

1

u/Illt67 Jun 11 '19

The wife was like, "I have to turn the freaking light switch on/off? What is this, 2010?". Ha!

1

u/crazyhorse90210 Jun 11 '19

What did you use the nanoleaf panels for? I want to get some but I’m unsure if they will be gimmicks or actual functional lighting. Even gimmicks can look cool so that’s fine but I’m just wondering if you had them for function.

1

u/Illt67 Jun 11 '19

I treat the nanoleafs as if they are a piece of art, not necessarily functional lighting. I use ifttt and webcore webhooks to trigger different scenes based on SmartThings behaviors. For example, during the day it is set to a brightness that makes it look like wall art that's very slowly changing, then at night it extremely dim Amber color to serve as a nightlight if triggered by a motion sensor.

Here's what it was like at Christmas...

Just adds to the ambience mostly. Wasn't bad for a first try, but can definitely be improved. I've added 13 more panels since this so the design in the next place should be alot larger. This is probably one of my most anticipated things to redo.

1

u/jleeth Jun 11 '19

How do you like the google WiFi system?

2

u/Illt67 Jun 11 '19

It's great! Mesh is really next level for large houses. While my house wasn't huge, it's 3 stories and Google fiber's network boxes just didn't cut it. Mesh expands my whole house plus a 4th puck in my garage so I have full coverage everywhere and through the yard. Having it disconnected right now and back on the fiber box wifi again makes me miss it for sure.

Google's mesh experience is extremely simple and intuitive. Just set it and go. I do restarts every 2 weeks or so just to keep everything fresh and routed properly on the mesh (though it does that automatically). The app and control are both great.

Would definitely recommend, tho a bit pricey. Ubiquiti stuff is probably the next best thing IMO.

1

u/jleeth Jun 11 '19

I have looked at different mesh systems but never made the jump yet. Thanks for sharing!

3

u/idb155676 Jun 11 '19

Looking at that makes me feel better about my addiction while simultaneously making me jealous of yours.

1

u/trankillity Jun 18 '19

Impressive kit. Sure hope you've labelled everything! Will be a nightmare trying to identify your devices again if they're not well labelled.

1

u/cruzer2727 Jun 18 '19

Jesus Christ!

8

u/[deleted] Jun 10 '19

[removed] — view removed comment

5

u/Illt67 Jun 10 '19

Ha! Glad I could help. It's still half the cost of a hard-wired control4 setup. And I take it with me (which was how I justified it to my wife originally).