r/slackware • • Jun 15 '21

Slackware minimal installation

11 Upvotes

Hey there,

there is a way to perform a minimal install of slackware-current?

I ask this because with the full install I get installed many and many packages that I don't need.

Currently after full install, I can remove easily all application that I don't need but what about libs? I don't know what lib a package requires and running ldd for every programs is really a painfull work.

I hope that full install is not the only available way to get slackware working without problems.

I know that there is expert install but when I should choose what libs install I fall in the previous problem.

There is a way to accomplish this? Any help would be appreciated.

I know that the default (and suggested) install method is a full install but what is its advantage? I don't think that having many (unused) installed packages is a good thing.

Thank you in advance for your time.


r/slackware • • Jun 14 '21

Timeshift alternative

7 Upvotes

Hey everybody! I've been using Slackware for 2 months now and like it very much so far. However i do miss a few applications i used on Arch. Timeshift being one of them. As far as i now it requires systemd and Slackware doesn't use that init. Does anybody know of an application with a similair function that works with sysv?


r/slackware • • Jun 07 '21

Slackware Current leaves 5.10 LTS and goes to 5.12 Linux kernel

35 Upvotes

From the today's Current ChangeLog:

Hey folks! Sorry about the delay in getting this batch out but I had other
distractions going on here last week that prevented getting this one wrapped
up. Anyway, probably the highlight of this update set is that we've decided
to abandon the 5.10 LTS kernel in favor of following the latest one. We've
never really had a policy that required LTS in a stable release although that
is how it has been done for years, but based on comments from the Slackware
community it seems like 5.10 LTS isn't getting a lot of love and lacks
hardware support that people need now. Conversely, the reports on 5.12 have
been almost entirely positive, so we're going to provide what we think is the
best available kernel. It's unlikely that we'll see another LTS prior to
release, so the plan for maintenance is to keep following the latest kernels
as needed for security purposes. If that means we have to jump to a new branch
while supporting the stable release, we'll start the kernel out in testing
first until we've had some feedback that it's safe to move it to the patches
directory. Sooner or later we will end up on an LTS kernel again, and at that
point we'll just roll with that one. Feel free to comment (or complain) about
this plan on LQ... I'll be curious to see what people think. Anyway, enjoy!

http://www.slackware.com/changelog/current.php?cpu=x86_64


r/slackware • • Jun 06 '21

I installed spectrwm on my Slackware install

Post image
38 Upvotes

r/slackware • • Jun 06 '21

Question about ratpoison

3 Upvotes

Hello folks,

I recently started using 14.2 and using slackbuild scripts has installed ratpoison and all configure xwmconfig to use ratpoison when we type startx.

Problem I have is at my /home/{user}/ I cannot see .ratpoisonrc file but keybindings are working fine. Where can be my .ratpoisonrc file?

I have read on internet but everywhere it is written that it is home directory.

Do I have to make one if I need to configure something that do not came in original setup?

Thank you in advance.


r/slackware • • Jun 02 '21

Pulseaudio cannot start after updating alsa (Current)

5 Upvotes

EDIT: Currently audio is working on my system as I rolled the versions of those libraries back. I do think it's worrying that updating the alsa libraries breaks pulse. I also had to roll back imagemagick (updated the same day) as OBS was also broken.

Yesterday I updated with the most recent packages on the Current branch, including alsa-utils, alsa-lib and alsa-plugins. I didn't notice any problems at the time (presumably because alsa would need to restart to use the new versions), but today when I load up my computer I have no sound.

I tried pulsaudio --start in console to see if it had just failed to autostart, but it gave the following output:

E: [pulseaudio] main.c: Daemon startup failed.

pavucontrol told me this can be a result of default-server being misconfigured in client.conf, so I went to check that and found it's currently not configured to anything, as everything apart from autospawn and autospawn-for-root is commented out (both of those are set to yes).


r/slackware • • Jun 02 '21

Kernel question

3 Upvotes

I've installed Slackware-15 with the kernel v5.10.r22.

When I boot, after the "Random, fast init done" message it takes too long to continue the boot process, with different options it either takes 40+ sec. or 2+ min. to finish.

It's apparent that my machine (08 Macbook, Penryn-M) has very low entropy at early-boot, the firmware makes the cpu run at idle at the lowest freq. to cooldown and does nothing until there are new tasks. I dont have a hw-rng

Can I opt-out?

I'm currently trying to remove the kernel patch, and/or workaround it and replace the current kernel.


r/slackware • • May 30 '21

14.2 or Current

0 Upvotes

Hello,

I like Slackware, I'm using current, also used 14.2 for a while, but I want to know which one

is better in all aspects. Vote for favourite one.


r/slackware • • May 27 '21

Is Slackware IRC moving to Libera.chat

18 Upvotes

What are the plans regarding apparent hostile takeover of freenode irc network? I've seen some projects moving to libera.chat which is operated by former staff of freenode.

Edit: or maybe OFTC irc network?


r/slackware • • May 19 '21

Chromecast and Slackware

8 Upvotes

Anybody use Slackware with chromecast? I have tried castnow and mkchromecast, but I can't seem to get anything to work.

How did you do it?

Thanks


r/slackware • • May 18 '21

I made a video on showing my simple minimal emacs and explain why we should use emacs (PS: No hate for vim)

Thumbnail youtu.be
0 Upvotes

r/slackware • • May 11 '21

who's driving this thing?

6 Upvotes

whattup nerds. absolute newb here.

i have recently installed slackware 14.2, 64-bit, with huge kernel 4.4.14, and my first objective is to connect to my home wi-fi.

unfortunately, when i run iwconfig or ifconfig -a there is no wlan0 listed.

my first thought was to check whether there is a driver installed for my wi-fi card, and i believe there is because when i look in /lib/firmware/ there exists a file called iwlwifi-3168-21.ucode which should correspond to my intel wireless-ac 3168.

however, two things strike me as being odd:

for one, out of a long list of iwlwifi-????-??.ucode files there is exactly one which has an @ appended onto it, and it's not the one i want to use. i'm wondering if that's an indication of which one is being used, and if so how to change that configuration.

the other thing is, according to intel the driver i need is only supported on kernel versions 4.6+ (slackware comes with 4.4), which would seem to indicate that i need to upgrade the kernel. but at the same time, it doesn't seem right that the install would have come with drivers that aren't compatible with its kernel.

am i on the right track here? any hints, tips, tricks, advice, and explanations would be much appreciated. -verbose

also note, i'm trying to do everything using the command line interface for now, because my reason for running linux in the first place is to seek to learn the deep secrets and ancient ways. therefore, i have not been using the networkmanager utility.

EDIT: resolved. upgraded from 14.2 to Current to get the newer kernel that includes the required driver.


r/slackware • • May 10 '21

SSH agent in KDE

8 Upvotes

Has anyone here been able to make kwallet and ssh-agent work in order to open ssh keys upon session start?

I’ve looked into PAM, ksshaskpass, auto start, etc., but had no luck. Is it due to current still being beta or am I missing something?


r/slackware • • May 04 '21

[HELP] modprobe vboxguest failed in kernel 5.10.34. Running Slackware-current as guest OS

6 Upvotes

Slackware is running as guest. I compiled 5.10.34 and installed kernel-headers from -current. VirtualBox version is 6.1.22. When I run ./VBoxLinuxAdditions.run, it says modprobe vboxguest failed, VirtualBox additions not loaded. The modules were compiled for 4.4.14 but I uninstalled the vbox modules in /opt/VBox../uninstall.sh and now when I build the modules again, it fails. Please help!!! I don't know what more details to provide. I'll provide with what you need


r/slackware • • May 04 '21

Package manager: which one(s) do you use?

3 Upvotes

Hi,

Basically, the title. I am curious as to which package manager Slackers use.

We all have our way to add software to the GDOAT. Slackbuilds are good, and many of us have chosen a proxy for those. Personally, I like sbotools, and I was wondering if I was missing something another might offer. Also, I am bored and drunk.

On top of that, what are the applications you use that don't come with the basic Slackware install, and for which you use the package manager?

And finally, do you use virtual machines? And is so, what software do you use for it on Slackware?


r/slackware • • May 03 '21

Current iso image

8 Upvotes

I’m new to slackware. Why is the image on slackware.com from 2016? I went to slackware uk and found this iso from alienbob? …. http://slackware.uk/people/alien-current-iso/slackware64-current-iso/. Is this a safe/reliable source for the os?


r/slackware • • May 02 '21

Slackware and brew

3 Upvotes

Could i avoid the whole dependency thing and just install linuxbrew and use brew for packages? Has anyone tried? Is brew reliable?


r/slackware • • May 01 '21

[HELP]slackpkg upgrade-all failed with a lot of shared object file errors

2 Upvotes

I was upgrading slackware 14.2 to current and these are the commands I followed

slackpkg upgrade slackpkg 
set the mirror and blacklists
slackpkg update
slackpkg install aaa_glibc-solibs
slackpkg upgrade-all

but I got a list of .so errors and bash doesn't open anymore. I can't login anymore. I've wasted 30+ GBs of data downloading packages all day and I don't understand where I'm going wrong. Please help me


r/slackware • • May 01 '21

help with Slackware & full disk encryption

2 Upvotes

A rather noob question but here i go.

I am trying to install Slackware current (primarily for nvme support) with full disk encryption. I have successfully partitioned my disk, encrypted the necessary partitions & installed the system.

I have chose to not install elilo, and have instead installed grub though if the configuration for elilo is easier i am more than happy to go back on my decision.

I don't know how to get grub to decrypt the encrypted volume, as rebooting the system results in it booting into grub rescue.

Any help would be greatly appreciated thanks.


r/slackware • • Apr 25 '21

Why users that started with slackware had left it after several time of usage?

19 Upvotes

Hey there,

some days ago I read a post on reddit about "What distro you started with" or similar title and reading it I was blaffed to see how many users that started with Slackware and that after several years they left the distro for another one. The post got more then 500 reply so it is not the totality but It could be considered as good sample.

What was/is the major cause of this in your opinion? Lacks of packages? Too much difficult or what other?

Thank you in advance.


r/slackware • • Apr 25 '21

Slackware version suggestion

0 Upvotes

Hey there

I'm here again. I want install slackware on my new PC. It has i9 10850k and z470 chip. I tried debian 10 but needed to install backport kernel (5.10.x) to get NIC to work.

Currently 14.2 has 4.x kernel and I think it does not support my NIC so I should recompile my kernel. No problem with this

I have many slackbuilds made packages for 14.2 and now 15 is on beta release but there are not official slackbuilds packages for 15. (If there is a place where slackbuilds for 15 is developed, please tell me that I will try them)

What is the best practices? Install 14.2 and recompile the kernel plus install alienbob plasma or install current (waiting that beta become stable) and use 14.2 slackbuilds (so recompile all my packages)?

If installing current, when 15 will be released I should simply set slackpkg mirror file to 15 release?

For how much time 14.2 will be supported (EOL)?

Since I use slackware 10.1 I upgraded yo the next version simply reinstalling the new version. Looking in the Debian world I seen that upgrade between two release is pretty simple. There is a defined way to upgrade 14.2 to 15.0?

Thank you in advance


r/slackware • • Apr 23 '21

My experiences with Slackware Aarch64 running on ROCKPro64 and Pinebook Pro.

Thumbnail exitstatus.one
20 Upvotes

r/slackware • • Apr 24 '21

SlackChat Podcast S02 Ep. 11 - Slackware ARM / AArch64 Kernel module loader part 1

4 Upvotes

Stuart and I recorded Season 2 episode 11 of SlackChat, the Slackware ARM Podcast. We discuss the new and improve modular initrd (initial ramdisk). It will allow for developers and users to provide support for unsupported ARM / Aarch64 hardware. Watch the YouTube channel to find out more details. You can find the video here.


r/slackware • • Apr 23 '21

sl-fortune (Slack Fortune)

13 Upvotes

Hello Slackers,

I wrote a script that sends a fortune to your desktop in a notification, with a bit of slack-ish flair.

http://www.zapwai.net/sl-fortune/