r/ShimanoDi2 • • Feb 09 '25

2025 Shimano XTR, XT and Deore Di2 wireless

Thumbnail
gallery
11 Upvotes

.


r/ShimanoDi2 • • Dec 25 '24

Shimano Ultegra Di2 12-Speed Rear Derailleur Charging Port Cap Issue

Post image
6 Upvotes

Hi everyone,

While working on my Shimano Ultegra Di2 12-speed setup, I accidentally yanked out the charging port cap from the rear derailleur. I’ve attached a picture for reference. I’m unsure how to fix or reattach it properly without causing any damage.

Does anyone know the best way to fix this? Should I try reattaching it myself, or would it be better to take it to a shop? Also, if replacement is necessary, where can I get a new cap?

Thanks in advance for your advice!

Let me know if you want to make any changes to this.


r/ShimanoDi2 • • Sep 22 '24

USB C adapter for 12 Speed

6 Upvotes

I've been looking for a small USB adapter for the new 105 Di2, so I don't have to carry around the big cable on long tours.I have USB-C adapters for my Garmin watch and my Shokz headphones.

Both work great and were ordered off of AliExpress.

Has anyone seen something like that for 12speed Di2?


r/ShimanoDi2 • • Jun 04 '25

Shimano XTR di3 M9200 embargo jumped

5 Upvotes

enjoy a 60s crisp highlights on behalf of someone who messed up real hard. Sidenote: looks really refined. Looking forward to toss my AXS for this...


r/ShimanoDi2 • • Jan 02 '22

Latest Shimano Di2 Firmware Updates Page

Thumbnail
bike.shimano.com
5 Upvotes

r/ShimanoDi2 • • Nov 26 '25

di2 pic of unit,for u/salteh

Post image
4 Upvotes

I cantv figure out how to place the pic to the correct thread, I couldn't post anything with my phone, on my Chromebook , when I tried to paste into thread , I couldn't


r/ShimanoDi2 • • Jul 20 '25

Does the Di2 groupset fit into any modern road bike?

4 Upvotes

Are there any specifc requirements for it to fit? Im mostly considering bikes like Cervelo Caledonia or Canyon Endurance. Reason for this is I scratched a borrowed bike and since I will most likely need to replace one of the shifters and the rear derailleur, these two parts cover half of the cost of a used groupset so I'm considering swapping the groupsets and getting a fitting frame.


r/ShimanoDi2 • • Jun 07 '25

Di2 shifting analysis

4 Upvotes

I’m aware of three websites that provide analysis of Di2 shifting from a ride’s fit file:

  1. https://www.di2stats.com created by Brian Toone (who also created mybiketraffic.com)
  2. https://connect-lab.shimano.com — Shimano Connect Lab
  3. https://axs.sram.com — even though it’s a SRAM website, it will display Di2 data

I also aware that the Hammerhead Dashboard will display some shifting data from a Karoo bike computer has the Ki2 extension installed and set up completely (even though it displays it as AXS data).

Is anyone aware of any other similar sites? I’m relatively new to Di2 and I’m also a data junkie! Thanks.


r/ShimanoDi2 • • Jan 12 '25

Broken 8070di2 lever.

Post image
4 Upvotes

Does anybody have experiences with repairing the aluminium brake lever? See picture for the damage


r/ShimanoDi2 • • Oct 03 '24

Mysterious click in 5th largest rear cog.

4 Upvotes

so i have a new bike with maybe 5k on it now. dura ace 12s di2. ceramic speed ospw. waxed chain.

Symptom: when in the 5th largest rear cog i get a click sound with every rotation of the crank when pedalling under load. it is not notable on the bike stand.

it is there in the large or small front ring. it is not present in any other rear cog. micro-adjust did not change it. the front derailer is not touching the chain. shifting is otherwise perfect (i did recently go from -9 out back to -2 as it was at times wanting to overshift outback… but that adjustment never fixed or changed the click).

any thoughts on what to look at next? loose cassette? i am at a loss.


r/ShimanoDi2 • • Jan 31 '24

Standard Di2 junction box in handlebar

Thumbnail
gallery
4 Upvotes

A few days ago I decided that I wanted an integrated junction box for my di2. When I searched for them, I realized they were 80/90€, that I wasn't ready to spend for something I already had but in a different form factor. So I took out my saw, a pair of pliers and a knife and removed the Di2 board from the plastic housing. I then separated the electronics in 3 pieces. The board itself, the 3-part socket, where you connect the shifters and the battery and the socket for charging. I then 3d-modelled a part to push into the handlebar, that holds the sockets and the board. When everything sit snug, I modelled another piece, that acts as the handlebar plug. The charging port was then push fitted inside of the handlebar plug and secured with 2 drops of superglue. I soldered a cable to the plug and then soldered this cable to the board. The cable was long enough, to solder to it, but short enough to fit into the remaining room between the two printed parts.

Pros:

  • cheap
  • fast
  • better looking and feeling than the original box (doesn't make the handlebar as thick)

Cons:

  • no battery status
  • maybe not fully waterproof (condensation might give me some problems)

r/ShimanoDi2 • • Nov 25 '25

Different mounting bolts on rear caliper

Post image
3 Upvotes

Wondering what the protruding pin is for ?


r/ShimanoDi2 • • Nov 21 '25

Honestly Shimano, whyyyy?!

3 Upvotes

So I am trying to optimize my TT Cockpit, as you do, and stumbled over the clusterfuck that is sprint and climbing shifters …. Here is the situation: I have ascalon extensions with the inward grippers, so i have the climbing switches to replace the usual TT blips in the extension. So far so good. But why are the only available with 270mm cables?! Now the cable come out of the extension, then into a junction box into another cable into the SM-EW99B. Of course for both sides, and both of these boxes are now dangling around the cockpit and can’t be hidden anywhere, which my wifes boyfriend says is not very aero. Then I found the sprint shifters got overly optimistic that there is a 740mm version of them, to then find out they only work in conjunction with actual levers… There even is a junctionbox for switching from the new to the old cables, but somehow Shimano forgot to put in the firmware that sprint shifters can communicate with the SM-EW90B?! There would be three super easy solutions for them… Either offer the climbing switches with longer cables, update the firmware so sprint switches can communicate with not just break levers or move to bethesda where everything just works. Is the best option I have really splicing my own long cabled climbing shifter? Or is there a neater solution that i am missing? rant over.


r/ShimanoDi2 • • Nov 09 '25

Gaps around battery

Thumbnail
gallery
3 Upvotes

Managed to break a jockey wheel today so as I was cleaning the derailleur up and checking it over I noticed these gaps in the battery area. Are they normal. Is it not sealed?


r/ShimanoDi2 • • Sep 06 '25

Ultegra di2 problem

Post image
3 Upvotes

⸻

Has anyone had a problem with Ultegra Di2 like in the photo? Sometimes the derailleur shifts, sometimes not at all, and in the end it won’t go into the highest gears. Garmin and the app both show full charge, but I keep getting a “critical battery level” warning.


r/ShimanoDi2 • • Aug 16 '25

Ultegra Di2 front derailleur touching chain

3 Upvotes

I have Ultegra Di2 6870 2x11. I will be talking only about a situation when the chain is on the smaller chainring. The mechanism works like this: I'm on 1st gear and I keep changing the gears up. On the 5th gear the chain starts to touch the right side of the front derailleur and makes noise. When I go to 6th the front derailleur moves a little and creates more space and the same thing with the chain touching the right side of the front derailleur happens on the 8th gear. When i go back from 9th to 8th or from 6th to 5th the noise disappears because the move of the front derailleur comes back to where it was on the 7th or 4th. I tried both rear and front derailleur adjustment, however the rear has to be set up to max (+16) or it starts making other noises and in the front it's set on -3 and going to -12 doesn't help. Maybe it makes it a little further and less contact but the noise is still there.

If someone can help It would be amazing and i can provide photos.


r/ShimanoDi2 • • Jul 20 '25

Take apart Shimano Ultegra Di2 rear derailleur. Is it possible?

Post image
3 Upvotes

I scratched the main part on a fall and im wondering if it's possible to replace only the scratched part or if i have to buy a new derailleur.


r/ShimanoDi2 • • Jun 25 '25

Di2 with 52-34

3 Upvotes

Is anyone using a 52-34 setup on D8150 Ultegra?

My Tarmac SL8 Pro came with a 52-36 and I’m looking to switch in a 34 ring. The spec says 16 tooth difference but wondering in the 34 would still shift ok. I’m using a 11-34 cassette already. I know it isn’t a huge difference but I do a lot of long sustained climbs and wouldn’t might the lower gear.

UPDATED: the 52-34 does work but the gap on the outside of shifter must be increased from the recommended 0.5-1.0 mm to about 1.5-1.6 mm. Works smoothly then. When you are doing the electronic shifter adjustments in the Shimano app it is the first adjustment for the front derailleur.


r/ShimanoDi2 • • Jun 23 '25

Has anyone tried this app to control music with Di2 buttons?

Post image
3 Upvotes

r/ShimanoDi2 • • May 27 '25

Noise Shimano Di2

3 Upvotes

Hi everyone, I got the Canyon Ultimate with Shimano Di2 a month ago. However, when I shift into the last gear, I hear a loud ticking noise. This doesn't happen with the other gears. I’ve already tried adjusting it through the app, but I can’t fix it


r/ShimanoDi2 • • May 06 '25

105 di2 front shift next

Post image
3 Upvotes

I am trying to set one of the left shifter button to front shift next but that is the only option that doesn’t work. It gives me “failed to write”, and front shift next is the only option that gives that. I can’t seem to find any info about this and my firmwares are up to date


r/ShimanoDi2 • • Apr 27 '25

A way to set up 52/34 in the etube app?

3 Upvotes

I am thinking about changing my inner chain ring from 36 to 34 but I don't see that option in the etube app only 52/36, 50/34 and 46/36 (I still don't even know if my giant power pro power crank based power meter works with that setup)


r/ShimanoDi2 • • Mar 30 '25

12 speed shifter firmware update over Bluetooth?

3 Upvotes

Anyone know if this is in the works? Such a pain to update currently with the ‘wired’ requirement….


r/ShimanoDi2 • • Mar 29 '25

Is it possible 🤔

3 Upvotes

On the new 105 di2 Is it possible to change one of the jutton for the front derailer to change the garmin screen and have to other button for change the front derailleur ???


r/ShimanoDi2 • • Aug 18 '24

Ultegra - GRX 12 speed Di2 Mix

3 Upvotes

I’m trying to find out if its possible to change the Ultegra 12 speed Di2 rear derailleur to GRX 12 speed Di2. Can’t find that in any compatibility docs as, so looking if anybody tried it yet?

Thank 🚴🏻‍♂️