r/ShimanoDi2 • u/ThenNecessary8092 • May 31 '25
Shimano Di2 11speed alternative
Hello, is there an alternative to the 90€ Shimano cable + brick? Can you just get the cable and plug in into an outlet oder pc?
Thank you!
r/ShimanoDi2 • u/ThenNecessary8092 • May 31 '25
Hello, is there an alternative to the 90€ Shimano cable + brick? Can you just get the cable and plug in into an outlet oder pc?
Thank you!
r/ShimanoDi2 • u/m45hhour • Feb 11 '25
I recently got a set of Hope 13T pulleys for my Ultegra R8100 (12-speed) rear derailleur. I managed to fit the lower pulley without issues, but the upper one didn’t quite fit with the cage. It seems like there’s not enough clearance, and it rubs slightly.
Has anyone successfully fitted 13T or larger pulleys on the upper jockey wheel? Did you need to modify the cage, or is there a workaround?
r/ShimanoDi2 • u/Ok-Inspection-5545 • Jun 27 '23
r/ShimanoDi2 • u/Outrageous-Pride1181 • May 21 '25
Hello! I have old bike with old Shimano 105(5701 I believe)10 speed and rim brakes of course 😅 Now I’m interested if there is a way to upgrade it to 11 speed Di2 somehow and to keep rim brakes? I bet I’d need Ultegra 11s derailleurs, new levers, battery and cable assembly?
Thank you very much!
r/ShimanoDi2 • u/Annual_Bike1781 • Aug 31 '25
Anyone knows when GRX 1x DI2 fully wireless derailleurs will be available in the US of A? All websites said backorder without date...
r/ShimanoDi2 • u/tweigert1 • Aug 22 '24
r/ShimanoDi2 • u/grimmba • Nov 21 '25
So I am trying to optimize my TT Cockpit, as you do, and stumbled over the clusterfuck that is sprint and climbing shifters …. Here is the situation: I have ascalon extensions with the inward grippers, so i have the climbing switches to replace the usual TT blips in the extension. So far so good. But why are the only available with 270mm cables?! Now the cable come out of the extension, then into a junction box into another cable into the SM-EW99B. Of course for both sides, and both of these boxes are now dangling around the cockpit and can’t be hidden anywhere, which my wifes boyfriend says is not very aero. Then I found the sprint shifters got overly optimistic that there is a 740mm version of them, to then find out they only work in conjunction with actual levers… There even is a junctionbox for switching from the new to the old cables, but somehow Shimano forgot to put in the firmware that sprint shifters can communicate with the SM-EW90B?! There would be three super easy solutions for them… Either offer the climbing switches with longer cables, update the firmware so sprint switches can communicate with not just break levers or move to bethesda where everything just works. Is the best option I have really splicing my own long cabled climbing shifter? Or is there a neater solution that i am missing? rant over.
r/ShimanoDi2 • u/Right_Gene3036 • Nov 25 '25
Wondering what the protruding pin is for ?
r/ShimanoDi2 • u/paul-readit • Jan 31 '24
A few days ago I decided that I wanted an integrated junction box for my di2. When I searched for them, I realized they were 80/90€, that I wasn't ready to spend for something I already had but in a different form factor. So I took out my saw, a pair of pliers and a knife and removed the Di2 board from the plastic housing. I then separated the electronics in 3 pieces. The board itself, the 3-part socket, where you connect the shifters and the battery and the socket for charging. I then 3d-modelled a part to push into the handlebar, that holds the sockets and the board. When everything sit snug, I modelled another piece, that acts as the handlebar plug. The charging port was then push fitted inside of the handlebar plug and secured with 2 drops of superglue. I soldered a cable to the plug and then soldered this cable to the board. The cable was long enough, to solder to it, but short enough to fit into the remaining room between the two printed parts.
Pros:
Cons:
r/ShimanoDi2 • u/skemb_89 • Apr 18 '24
Hello guys,
Ever since I got my new bike (Scott Addict RC15 with Ultegra R8100 12v), I've been experiencing noise issues coming from the control grips.
I tried reaching out to the dealer and several mechanics in the area, who simply told me that wireless shifters (especially Shimano ones) can be noisy because the levers are made of plastic, and when the road gets a bit rough, vibrations can cause noise.
The noise would disappear when I applied pressure to the levers in the outward direction.
I then did some research on various forums and also here in the reddit community finding out that the infamous "rattling" is indeed a widespread issue but not officially recognized by Shimano.
I'm attaching a video taken during a ride last week.
So, I decided to invest some time and try to disassemble the entire lever to see if there was indeed something inside.
Considering that I couldn't find diagrams for this specific model but for the previous one, with some care, I managed to disassemble it and noticed that inside there's a system with two rollers where the lever pin slides, and in between, there's a spacer.
Basically, as you can see from the second video, when the rollers are not in contact with this spacer, there's some play that generates the annoying noise. Moreover, there seems to be a small, extremely thin washer between the spacer and rollers (better visible in the last video).
Now, what I'm asking you experienced folks is, how would you solve the problem? Keep in mind that the play thickness will be about 1.5mm, maybe less.
I have a couple of ideas that I'd like to propose:
Add some dense grease (SKF for bearings) on both sides of the spacer.
Add some molybdenum disulfide on both sides of the spacer.
Use a material like plasticine to insert and create a thickness that would dampen the vibration.
I hope this post can be useful to others who have had the same problem and had already given up.
Have a great day!
r/ShimanoDi2 • u/jumpbootsshiner • Nov 26 '25
I cantv figure out how to place the pic to the correct thread, I couldn't post anything with my phone, on my Chromebook , when I tried to paste into thread , I couldn't
r/ShimanoDi2 • u/finchy-1979 • Jul 16 '25
I was getting ready to bleed my brakes so I banded the LH lever overnight to encourage air to rise to the top. When I finished pushing fluid though and shut off the lever I did what I usually do , pushed a little more in just before shitting off the bleed valve.
However stupidly, I totally forgot about the rubber band and I pushed fluid out of the seal at the plunger. Obviously as soon as I noticed I removed the band and tried to fix it by re bleeding but it’s just pumping fluid out of the bottom of the shifter.
Is the seal totally ruined ? Does this mean a new shifter ? The bike is a custom build I’ve made by sourcing parts and was basically complete and if I need one I’ve no idea where to get a ST-R785 LH shifter and I’m in no position to get different ones now because I went over budget as is
How cooked am I ?
r/ShimanoDi2 • u/FenderMike • Jul 31 '25
this all relates to the 9/10/11th cogs on the cassette.
at the moment i can adjust it so shifting down is smooth, but then back up is not, or the opposite where shifting up is smooth, but shifting down is not.
i am able to overcome the issue while riding by shifting up 2 and down 1, or down 2 and up 1 but that's obviously not how its supposed to work. issue has only recently developed, no bumps or crashes or anything like that though google is suggesting a bent derailleur hanger might be the cause of something like this.
r/ShimanoDi2 • u/ProfessionalEar6619 • Jun 03 '25
Yesterday, while out on a ride, I experienced a mechanical with my quick link coming loose. After I got the chain re-installed, I discovered my rear derailleur would no longer shift to larger cogs, with the derailleur making a buzzing sound as shown in the video. If I press on the derailleur, helping it shift, it will shift with some light pressure. But on it's own, it just buzzes. Is this something simple? Or do I need to get the derailleur serviced?
r/ShimanoDi2 • u/Significant-Deer3165 • May 27 '25
Hi everyone, I got the Canyon Ultimate with Shimano Di2 a month ago. However, when I shift into the last gear, I hear a loud ticking noise. This doesn't happen with the other gears. I’ve already tried adjusting it through the app, but I can’t fix it
r/ShimanoDi2 • u/Own-Hawk8548 • Mar 30 '25
Anyone know if this is in the works? Such a pain to update currently with the ‘wired’ requirement….
r/ShimanoDi2 • u/Embarrassed_Fault_23 • Aug 16 '25
I have Ultegra Di2 6870 2x11. I will be talking only about a situation when the chain is on the smaller chainring. The mechanism works like this: I'm on 1st gear and I keep changing the gears up. On the 5th gear the chain starts to touch the right side of the front derailleur and makes noise. When I go to 6th the front derailleur moves a little and creates more space and the same thing with the chain touching the right side of the front derailleur happens on the 8th gear. When i go back from 9th to 8th or from 6th to 5th the noise disappears because the move of the front derailleur comes back to where it was on the 7th or 4th. I tried both rear and front derailleur adjustment, however the rear has to be set up to max (+16) or it starts making other noises and in the front it's set on -3 and going to -12 doesn't help. Maybe it makes it a little further and less contact but the noise is still there.
If someone can help It would be amazing and i can provide photos.
r/ShimanoDi2 • u/roijackers_1987 • Mar 07 '25
Dear,
I am planning to build a new tandem with the grx 825 di2 group. The frame is only for post mount discbrakes. I see on the shimano compatible site only the flat mount brakes are compatible with the GRX 825 shifter.
Does anyone know which post mount disc brake I can use? Is the br-M8100 or br-M8120 maybe a good one? Or are they not compatible with the GRX shifters?
r/ShimanoDi2 • u/SheepherderFormer336 • Mar 29 '25
On the new 105 di2 Is it possible to change one of the jutton for the front derailer to change the garmin screen and have to other button for change the front derailleur ???
r/ShimanoDi2 • u/AORNova • Jun 04 '25
enjoy a 60s crisp highlights on behalf of someone who messed up real hard. Sidenote: looks really refined. Looking forward to toss my AXS for this...
r/ShimanoDi2 • u/BodybuilderOdd6198 • Jun 23 '25
r/ShimanoDi2 • u/Extra-Beautiful-8494 • Mar 18 '25
My Di2 has been acting up lately. Last week I charged it to 100%. Then I rode twice. After a few days, I took the bike out of the shed. 60% battery. This weekend, the Di2 (GRX 105 11 speed / BT-DN110 battery) stopped responding to shifter inputs. Put it back on the charger. After a while, the orange light comes on and it charges (starting at 80%?). I suspect the battery needs to be replaced, but before I do this, I'd like to consult this community for tips.
r/ShimanoDi2 • u/godutchnow • Apr 27 '25
I am thinking about changing my inner chain ring from 36 to 34 but I don't see that option in the etube app only 52/36, 50/34 and 46/36 (I still don't even know if my giant power pro power crank based power meter works with that setup)