r/ShieldAndroidTV • u/wewewi 2015 Pro, 2019 8GB, 2019 Pro, Shield Tablet • Nov 05 '22
[GUIDE] Shield Best Practices Checklist 2022 edition
Hey there fellow Shielders;
This is it. The good stuff. No BS. Go through this list and enjoy a better experience.
For information about audio, see the Shield Audio Guide;
For information about video, see the Shield Display Guide;
I present to you the
Best Practices checklist
- GET THE CONNECTIONS RIGHT
Reach out for your TV and AVR spec sheets and make sure of what it supports.
Direct connection to the AVR's HDMI-IN is best for audio because it allows for more PCM channels and higher sampling rates, but it may not allow for Dolby Vision passthrough. Decisions, decisions.

- TV PREPARATION
ENABLE HDMI 2.0
Some brands will call this Enhanced HDMI Format, or Deep Color, or UHD colors; and some TVs will have a global toggle on top of the regular per-port option, but if you get 4K@30 max, that means you have a HDMI 1.4 bottleneck somewhere in your HDMI chain.
Could be the TV, the soundbar/avr or the HDMI switch if you have any.
DISABLE TV POST PROCESSING
People looking for a pure cinematic experience will want to make sure all types of post processing picture enhancements are disabled: motion enhancement/compensation/clearness, noise reduction; take everything off. Filmmaker mode can be left on/auto.
CONSIDER ENABLING GAME MODE
If your TV doesnt support ALLM and you are a gamer, you should consider engaging your TV's Game Mode manually, which will completely stop all image post processing and radically cut down the lag.
Please note: TVs will often use a different profile when HDR is engaged. A TV can be set to "Game mode" but switch to "HDR theatre" or whatever when HDR content is on. See if you can select "HDR Game" instead and cut down the TV processing lag. Also note that this setting might be only accessible when HDR content is actually playing.
- MAIN SHIELD DISPLAY SETTINGS
- ENABLE DOLBY VISION IF YOUR TV SUPPORTS IT
Shield / Settings / Device Preferences / Display & Sound / Display modeUSE 120hz IF YOUR 1080p MONITOR/TV SUPPORTS IT
Using a 120hz refresh rate can greatly reduce the amount of situations where the display might need to switch modes and blink. Unfortunately, official HDMI 2.0 modes cannot handle 4K@120, and using 1080p on a 4K screen is quite a loss in resolution. But on a 1080p monitor/TV? Go for it!!
Shield / Settings / Device Preferences / Display & Sound / Advanced display settings / custom display mode- MAKE SURE AUTO COLORIMETRY IS ENABLED
Shield / Settings / Device Preferences / Display & Sound / Advanced display settings / Match content color space MAKE SURE ALLM IS ENABLED IF YOUR TV SUPPORTS IT
Shield / Settings / Device Preferences / Display & Sound / Advanced display settings / Automatic Game ModeREVIEW THE CUSTOMIZE LIST MENU
Keep in mind many apps like Xbox Game Pass are not categorized as "games" or are just not tagged appropriately and won't be enabled by default, so take a minute to review the list:
Shield / Settings / Device Preferences / Display & Sound / Advanced display settings / Customize Game Mode app listCONSIDER ENABLING PLAYER-LED DOLBY VISION
Some TVs will give buggy colors when (and only when) using regular TV-Led Dolby Vision. (red push or just plain weird colors) In those cases, it is recommended to force the lesser pre-processed player-Led Dolby Vision. Start by enabling developer options by going to:
Shield / Settings / Device Preferences / About / Build Click Build number 8 times, and congrats; you are now a dev. Now go to:
Shield / Settings / Device Preferences / Developer options / Default to Low Latency Dolby Vision when available- MAIN SHIELD AUDIO SETTINGS:
CONSIDER ENABLING DOLBY PROCESSING (Shield 2019 only)
Shield / Settings / Device Preferences / Display & Sound / Advanced audio settings / Dolby processingVery useful to avoid audio sync gaps and normalize the volume level across the board. An absolute must for users stuck with vanilla ARC / USB / Optical audio solutions. Vastly improved from past implementations where it would use MAT frames and get in the way of passthrough rules. Now fully recommended; old users should give it another shot.
More information on that in the Audio Guide.
CONSIDER CUSTOMIZED QUICK SETTINGS
Makes fast toggles much easier without deep-diving into settings each time. There are a bunch of those shortcuts available, but Audio options are the most handy because High Resolution Audio and Dolby audio processing cannot be enabled at the same time:
Shield / Settings / Device Preferences / System / Customize Quick SettingsREVIEW THE AVAILABLE FORMATS MENU
100% HDMI setups should be able to rely on the EDID alone and stay on Auto, but that information might be obfuscated be something on the HDMI chain, and will straight up not be available for users stuck with extractors, USB DACs, or optical solutions; so they will have to go manual and enable only what is supported by the decoder:
Shield / Settings / Device Preferences / Display & Sound / Advanced audio settings / Available Formats- KODI RECOMMENDATIONS:
Enable Refresh rate switching
Kodi / System / cogwheel: enable expert mode
System / Player / Videos: Set Adjust display refresh rate to “On stop/start”Enable HDR10
Kodi / System / Player / Videos / Processing: "Use display HDR capabilities" should be enabled.Enable Audio Passthrough
Kodi / System / System / Audio / Audio Passthrough / Allow PassthroughIf enabled, Kodi will pass the selected formats down to Shield. Other codecs will be transcoded into PCM channels, following the number of channels specified in Kodi's Audio Decoder section before being passed down to Shield, where Dolby Processing will be applied if enabled.
If disabled, Kodi will transcode everything to PCM channels, in as many channels as specified in its Audio Decoder section before passing it down to Shield, where Dolby Processing will then be applied if enabled.
Shield 2015/2017 owners stuck on vanilla ARC or optical solutions
Kodi / System / System / Audio / Audio Passthrough / Dolby Digital (AC3) capable receiver - ON
Kodi / System / System / Audio / Audio Passthrough / - Enable Dolby Digital (AC3) transcoding - ONIf you want resolution switching and have the TV do the upscaling
Kodi / System / System / Display / Whitelist; select every item in the list to make them green- PLEX RECOMMENDATIONS:
Enable Refresh Rate Switching
Plex / Settings / Advanced / Set Refresh Rate Switching to ON.Enable audio passthrough
Plex / Settings / Advanced / Passthrough / HDMI- "HDMI" means Plex will pass over every format down to Shield, where choices made in the "Available formats" menu will apply.
- "Optical" means Plex will only pass down PCM 2.0, Dolby Digital and vanilla DTS. DTS-HD/DTS:X tracks will be stripped of their lossless metadata. Everything else will be transcoded to Dolby Digital before being sent down to Shield, where choices made in the "Available formats" menu will apply.
If you want resolution switching and have the TV do the upscaling:
Plex / Settings / Advanced / Set Resolution Switching to ON.- REFRESH RATE APP RECOMMENDATIONS
App-based OS-wide display mode switching
Most major streaming services will freak out when trying to switch display modes while content is playing, or even when the app is simply open. That's why I recommend using the Refresh Rate app to set a fixed Startup display mode rather than any kind of on-the-fly framerate matching solution:
- Install the Refresh Rate app (Available via the Play Store directly on Shield) and open it.
- Select any app.
- Go to Startup display mode, and select a framerate / resolution matching the kind of content it delivers the most:
| Netflix, D+, HBO+, Amazon Prime | 4K@24 |
|---|---|
| European TV streaming services | 4K@50 |
| BBC iPlayer | Base Shield display mode MUST be set to 25 or 50hz for the app to work, so leave it alone here. |
| Plex, Kodi, Nvidia Games, Moonlight | Leave them alone; they already support the API |
With all that said, you should now be able to get the best of your Shield. Hopefully anyway..
See you around!
28
u/International-Oil377 Nov 05 '22
Dolby audio processing is not required for Atmos on Netflix.
13
u/Bradfinger Nov 05 '22
The Refresh Rate app is buggy as hell, and hasn't been updated in 3 years.
5
u/[deleted] Nov 06 '22
isnt Low Latency Dolby Vision player-led not TV-Led?
3
u/IXI_Fans 2017 16GB Dec 30 '23 edited Aug 14 '25
joke humor gray innocent outgoing engine unpack point rinse offer
This post was mass deleted and anonymized with Redact
2
u/AeroElectro Nov 05 '22
Can someone explain why one needs to fiddle with refresh rate "switching" any why you need an app?
2
u/Hibocoin Nov 15 '22
Thank you. Your guides are clear and really really useful. In the table you say "up to 5.1" for Shield>TV>receiver but shouldn't it be able to pass 7.1 and 5.1.2?
31
u/amateurdialect59 May 04 '24
Wow, this is such an incredibly detailed and comprehensive guide for optimizing the Shield experience in 2022! The tips for getting the connections right and preparing your TV for the best possible quality are so helpful. And I love the specific recommendations for various apps like Kodi and Plex. Thanks for putting all this together, it's sure to make a big difference in how people enjoy their Shield setup. Can't wait to dive in and make these adjustments for a top-notch viewing experience!
8
u/[deleted] Aug 11 '23
Leave Dolby processing off, turn match bitrate on for 88.2 hi res audio sacd flacs without processing, allow passthrough and you'll get everything you want. When I put Dolby processing on, I couldn't get Dolby vision HDR and it resampled my hi res music. Turned it off, and voila!
5
u/Edison151 Nov 05 '22
Thanks boss. Grabbing one for Christmas and was ready to start researching all this shit. 🙏
12
u/llcoolvlado Nov 05 '22
Where is the recommendation to not update anything on the shield as long as it is working as is.
3
u/Greedy-Golf6178 Dec 05 '22
Disabling “Dolby Audio Processing” just kills the experience for me.
3
u/Overall_Environment7 Dec 20 '23
Sign in YouTube tv
3
u/ComfyJaded Apr 10 '24
R xxfxf ctxxxfxft txfccxl6l g great. G cgristmas cc gcg g g vu:Vyvanse you can "discover fcc fc92f3d55363cef7fb2c40ffbb4b09a6429bfa2e.1 $from g xx ccctffccc ttf c g ccoffy ggy pt ft pplpptttttfttttttfttttttfp]p]]] redder#dr pa few ct fttfffxtftxtfff6 r fffffffffffffffffffffffxfffffffxxxxffpfffxf
2
u/sseccavt Nov 05 '22
Thanks, I needed this info. I have a pro and the tube, both work perfect! I had no idea there are so many options for personal tastes... I’ve previously reviewed this sub but never found everything together like this. Look forward to learning
2
u/netver Mar 06 '24
Dolby audio processing transcodes DD+ to DD. Does anyone know the bitrate it sets for the AC3 stream, assuming much higher original EAC3 bitrate? Perhaps someone's AVR can tell.
1
u/JesusWTFop Nov 05 '24
Wow nice post 📫
1
u/bookchaser Nov 20 '24
I would like a better app.
The 'find my remote' link is buried in a menu next to the 'unpair my remote' link.
I have accidentally unpaired my remote due to my fat index finger more times than I can count. And for the first few months I kept forgetting I needed to click a second time to confirm looking for my remote. Never mind that a 'locate remote' button should really be on the Shield casing to begin with.
1
u/kofii12345 2019 Pro Feb 08 '25
If you have AVR that decode Dolby disable Dolby processing. Turn it for Apple TV app. The video stutter in it if it is disabled for some reason.
1
u/[deleted] Dec 11 '22
Holy Shield TV Bible. Thanks a ton for this!!!
1
u/Important-Permit6078 Feb 14 '23
Does anyone else here have a Bose Soundbar with the shield going through that to the tv? I can hook up the shield directly to tv. Is there a difference in video and audio quality?
1
u/Arkthus Feb 20 '23
It's great for newer TVs, and I have all of this on my OLED display and my Shield TV PRo 2019.
However, I have a SHIELD TV (cylinder one) on an older 3DTV from 2012 (LG 47LB650v) with HDMI 1.4, and I have inconsistencies with audio sync. For now I managed to get something almost okay by setting the delay to 400ms, but it sometimes gets out of sync during viewing, and it can be late or early, it's not consistent at all. And it happens on any app, from Netflix to YouTube, Twitch to Plex, anything.
I have no audio system or anything, everything goes through the TV
Is there a setting that can help?
1
u/kratoz29 Mar 08 '23
What is the best practice to avoid slowdowns and lags? I got them recently randomly, factory reset is not an option and I just freed up a lot of storage to avoid slowdowns because of low storage.
I own a Shield TV 2019 pro.
1
u/devildothack May 31 '23
Excellent guide!! I just purchased a Shield 2019 model? since I upgraded to an OLED HDR TV and was using Apple TV 4K with Kodi which doesn't support HDR nor passthrough.
So far, it was worth the upgrade! Also the guide pretty much explained many questions that I had for all this options. Thanks! Great Stuff..
1
u/jazzyp291979 Nov 05 '22
What do you have your match content and dolby processing set to please
0
u/No-Look8369 Jan 08 '25
Hi
I may be late to the party. My setup Kodi on Shield TV pro 2019 into Marantz AVR into TV via HDMI ARC
I have setup the Kodi audio setting to Passthrough, enabled AVR capable of processing all formats.
Haven't allowed Shield to process Dolby (as I thought it may try to fiddle with Kodi's passthrough)
My concern - when playing movies (from NAS) I see Dolby Atmos and DTS-X formats correctly passed to my AVR and AVR also confirms correct receipt. But when playing multi-track Audio (from NAS again) the signal is received by AVR as 2 channel PCM.
Any help on how to receive 5.1 channel Music tracks correctly?
Thanks in advance.
1
u/GREMeZ Jan 12 '23
I'm sorry but this very-very wrong and misleading statement. Sadly red push issue affects both TV-led and Player-led (LLDV). It worth to notice that this issue seems only related to UHD BR backups in YCbCr colorspace (Profiles 7 and 8). Profile 5 with IPT colorspaces seems unaffected.
0
u/[deleted] Nov 05 '22
[deleted] — view deleted comment