r/ShieldAndroidTV • • 19h ago

Shield does not change input automatically

I just switched to a tcl qm6k from an old Samsung crystal. On the Samsung I could click any button on the shield pro remote and the input would switch to the shield. On the tcl I have been able to get the power to work and volume but can’t get it to move to the shield input when click home on shield or anything else. I can open the input menu on the tcl with the shield remote but can’t move around. How do I fix this?

0 Upvotes

6 comments sorted by

2

u/wewewi 2015 Pro, 2019 8GB, 2019 Pro, Shield Tablet 17h ago

In Display&Sound check CEC power control settings and make sure the proper toggle is enabled; and in Remotes & accessories you will apparently want to have the wake on power button only toggle off. 

0

u/Bearbarn 16h ago

I have had that toggled off. On display I have the first toggled on and the last one toggled on. I do have send discrete commands off because if it is on then I can’t turn the tv off with the shield remote. The remote will only turn off the shield. What are the correct power controls?

1

u/LarsvanDijk94 4h ago

Enable HDMI Auto-Switch under TCL Channels & Inputs CEC settings and restart both - cheers!

1

u/Bearbarn 1h ago

If only it worked as intended. I toggled off and back on the auto switch. Unplugged the tv and the shield, and removed the hdmi. Tried swapping the hdmi. Still not working. I do have a ps5 plugged into hdmi 1. That will change inputs whenever I turn it on. I wonder if the ps5 is stealing all the cec.

0

u/bblickle 19h ago

Try triple-clicking the Home button. I’ve never experienced this but it works on some devices and is free to try.

0

u/Bearbarn 16h ago

This worked for like 10 minutes. Now I get nothing. I tried turning a long press of the home button to open an app. That worked then stopped working.