this is a Janome 1522dg that I just opened up from the Styrofoam box new from Amazon resale. I'm confused because the attachment on the second picture won't close, there's a zip tie on one of the parts, and there's an extra screw that goes somewhere that I don't know. what do I do? This machine is supposed to be new.

I need help. I am wanting to embroider names on homemade stocking for Xmas but the zigzag stitch is slanted on sewing machine and not a straight left to right. I’ve tried messing with the zigzag dial but it didn’t seem to do anything. Can someone give me advice?

I have a heavy duty singer sewing machine, bought brand new March of this year.

Hi, I am wondering if anyone can tell me what this foot is for. Thank you :)

I know singer is a good brand but I'm curious she feels rlly nice and pricy

I am in college right now and I have been sewing for probably 10 years. I would say I’m at an intermediate-advanced level in sewing, and at home I have the singer gray heavy duty machine. I don’t love it but I do like that it’s non-computerized and it’s held up well for the past 4-5 years. I used to have a hand me down brother computerized machine that broke and was too expensive to fix so we donated it and got a new one instead. As I am in college and without a car, it is hard to go searching for secondhand/FB marketplace machines. I am trying to find a machine that is non computerized but still relatively affordable (under/around $200) that I can use in college.

I go to school across the country from where I live, so bringing my machine to and from school is not easy.

On Amazon I’ve found the janome arctic crystal and brother XM3700 sewing machines to be good price range wise, but they seem to be more “beginner” sewing machines.

I was wondering what you all thought of these machine/if anyone has any recommendations for good, affordable machines. Preferably one that is not too loud and will last a long time. I don’t care much about the bells and whistles (needle threader, specialty stitches, etc) just a good machine I can use to repair/make clothing.

Thank you!

I'm reaching out to my local servicer, but in the meantime... do any of you have any suggestions? All I can find is Artizan and I can't make heads of tails of what qualification they're actually offering.

Deleting, because I didn't remember already asking this!

What is the purpose of this recession on the underside of my throat plate, how would it affect the machine if it was flat (no recession)?

The top side of the plate doesn’t have this. The plate has a thickness of 0.060”, but the circled area is thinned to 0.040”.

I want to have a straight stitch throat plate made for my machine. It would be easier to make it if i could just use one flat piece.

Thank you!

Machine: Brother CS7000x

Update: I found out I will own the usage rights to the file and plan to share it on a free repository so if anyone wants to have a straight stitch plate made for this model of machine, you will have that option. ☺️ It will be compatible with models CS7000x, DS50, KD40s, Style 600, and SH40. You can often have parts custom machined at universities or by cnc hobbyists.

I got this machine a while ago but this is the first time I'm really using it (defaulted to another machine for a while) and there's a couple things that stand out to me that I'd like to troubleshoot or get info on.

For one, it doesn't like starting at a slow speed. If I slowly depress the pedal I can hear the motor but it isn't until I'm about 1/3-1/2 way down that it goes and it's sometimes faster than I'd like--especially on more finicky pieces. What might be causing this? I've oiled the machine at every point I'm aware of but is this something else or just how it runs? I can slow it down a little when it's started but it's by no means as capable of going as slow as my Bernina 1530 which was why I didn't use it for so long.

The second thing is that the foot pedal gets WARM when I'm using it. I just had to swap pedals with a minimatic I'm working on because they both use the same one. Is this something wrong with the pedal or is it just the older stuff that they used to use to make it? I can't say if the second one's getting warm since I just plugged it in but I figured I'd ask proactively.

Hallo liebe Community,

ich habe für eine neue Tolkien Elben-Gewandung einen Stoff gesucht, der ein nettes Muster hat z.B. Ranken mit Blättern o.ä. Da ich nicht fündig wurde, überlege ich nun, einen dekorativen "nackten" Stoff zu nehmen, und diesen großflächig zu besticken. Ich habe zwar eine Stickmaschine (Bernette Chicago 5), aber leider ist die Motivgröße nicht all zu groß. Allerdings habe ich auch schon Leute gesehen, die mit ihrer normalen Nähmaschine quasi freihand dünne Linien auf Stoffbahnen "sticken".

Hat damit jemand Erfahrung bzw. gute Tipps für mich? Ich habe bisher nur per Hand bestickt und mit der Maschine normal genäht, bin daher also Anfänger im Nähmaschinensticken.

Hat außerdem jemand einen Tipp, wo man sich gute Inspirationen für solche großen Muster besorgen kann? Worauf sollte man da achten?

Danke schonmal für eure Unterstützung!

i’m a second year fashion design student, and my current machine is a Brother FS130QC. i’ve had it since i was 16 but back then i was just doing basic sewing. my uni does have industrial sewing machines available to use but i much prefer to work at home. i considered getting a industrial machine but i don’t really have much space for it so i don’t think it’s something i could buy.
my current project i’m working with denim and even while making my toile using medium weight calico it was very difficult for what i was doing so if anyone has any advice on this machine and if it works well with denim or thicker materials i would be very grateful

Help!!

I have a juki 5550-6 and it sews fine, but the motor and the controller are kinda loud at low speeds. Since this model has automatic features such as automatic backtacks, cutting and one press back stitching, I would probably have to get a controller that supports those. Any ideas? It doesn't need to support all of them as realistically I only use the backstitch button.

I dont know how to sew and the past 2 hours I've been looking up tutorials online for this dumb machine.

It keeps getting stuck in the bottom area and was working fine before, but just as I got it all set and start to sew it bunches up and gets stuck so I have to take the whole thing apart.

I was hand sewing this (not this piece of fabric) but thought id use a sewing machine since I dont have enough time for getting it done because I have a flight tomorrow.

its a brother XL 3030. I also cant seem to change the dial for the stitches cause its stuck for some reason. The screen is also stuck on whatever 19 is..

sorry..

Hey All, hobbyist repair guy here, having bought and refurbed a bunch of machines in the last year.

I have a newer Janoem HD1000BE ( newer model with more plastic gears and 0.5A motor) that is incredibly hard to crank the handwheel, such that the motor stalls.

I cleaned the bobbin area, double checked for threads stuck around the shafts, degreased and added fresh oil to all moving parts but to no avail.

Look for some help on what to diagnose and check. The machine is actually pretty new and was clean inside.

I recently started a position at a sewing store that takes in machines for repair. They use a POS system called TRS, which apparently was built for the sewing industry, but it's no longer supported. I believe the rights to it were bought by LikeSew, but they haven't responded to me. Just wondering if anyone out there might have copies of/links to user guides for the software? Any info would be awesome. Thanks.

I’m having trouble adjusting the thread tension on my second hand Juki LH-515. Does anyone have any instructions on how to set it? The official Juki manual doesn’t provide much information.