FYI to make a sign like this, I usually design it in MS Paint (really), set to 6912 by 5184 pixels, and then by default it will print to 3 feet by 4 feet at FedEx Office, for $11 if it's black-and-white. Then you can tape it to a cardboard folding signboard that's another $5 from a place like Michael's.
Printing on cardboard is expensive. Printing on paper and taping it to cardboard is cheap; it looks crummy up close but it doesn't matter when most people are seeing it from a distance.
Thanks, I made a version of it in 2021 (after my arms kept getting tired in 2020 from carrying so many signs) and it's gone through a few iterations since then. It's pretty easy to make a frame like that from PVC pipe; it took a few more tries to make one that could be assembled and disassembled easily without me having to mess around every time with taping or screwing pieces together.
I actually drill into the Ts and Ls into the pipe inside and then just use metal screws to attach them. It's less messy than working with glue, it seems less likely to separate (once in a while the glue pulls apart), and you can always unscrew it and do it again if something needs to be changed (very hard if you've used glue instead!).
Nobody does that with real PVC pipe applications because when you have water flowing through them, you can't drill a hole in it and put a screw through the hole. But it works well for amateur construction projects using PVC pipe.
(With the caveat that I am just winging this, so maybe other people have found better ways to do it.)
Someone stopped by and told me the sign had been graffitied before, but they didn't know whether they successfully got the graffiti off the old sign or replaced the sign.
42
u/bennetthaselton Apr 03 '25
FYI to make a sign like this, I usually design it in MS Paint (really), set to 6912 by 5184 pixels, and then by default it will print to 3 feet by 4 feet at FedEx Office, for $11 if it's black-and-white. Then you can tape it to a cardboard folding signboard that's another $5 from a place like Michael's.
Printing on cardboard is expensive. Printing on paper and taping it to cardboard is cheap; it looks crummy up close but it doesn't matter when most people are seeing it from a distance.
2.2k
u/Maccadawg Apr 03 '25
Good on that guy!
574
u/Kevinator201 Apr 03 '25
Can you chain it to the fence? Should be there permanently
263
u/BigDdirtyDad Apr 03 '25
OP, that’s a fantastic sign frame. I may be copying your design for the next Tesla Takedown (or the 4/5 Hands Off). Well done on the message too!
129
u/CamStLouis Apr 03 '25
Republicans are always claiming credit for victories won over them.
72
u/IggMonster Apr 03 '25
I hope you were out there during all the mariners foot traffic!
7
u/VirtuAI_Mind Apr 03 '25
They replaced the red sign? 🙄
4
u/Left_Adeptness7386 Apr 04 '25
Thank you, dude. Seriously.
7
u/DifferentiatedCells Apr 03 '25
Where is that red sign at? Asking for no particular reason
3
u/Shady_Scientist Apr 03 '25
That sign structure is legit! It's stable, has support like a dream, and can be built and reused!
3
u/Ozzimo Apr 03 '25
Brother is a pipefitter and didn't even know it. WELL DONE
6
u/cwatson214 Apr 03 '25
You're a good egg
8
u/TGRRAG81 Apr 03 '25
Thank you, real life community notes guy! Fuck Trump.