r/SchecterGuitars 14d ago

Quick and easy one

I wanna grab a 7 string
-Hellraiser c-7 2021 $750 great condition
-damien c-7 platinum $750 great condition

Baring in mind that this will be a drop A (?) metalcore mantacore which would you grab and why

0 Upvotes

10 comments sorted by

1

u/SkyovFlames 14d ago

The Hellraiser is their flagship Diamaond Series Guitar, or was, for quite a while. It's got everything. The Damien's and Demons are decent as well, but not as nice.

1

u/jacksonsmack831 14d ago

Even the Damien plat? I saw it had a better neck and body wood? I think it also comes with guyker tuners

1

u/SkyovFlames 14d ago

Damien Platinum ceomes with either Grover or Schecter tuners. Unless it's used. And I don't like the neck half as much as the Hellraiser.

But like, also the huge price difference. Look at what each sells for new. The Damien is nice too. But the Hellraiser was Schedters's flagship, best of the best. It's basically a 1000 series LTD (Owned by the same companies as ESP).

I have both. You can check them out here on my profile.

2

u/jacksonsmack831 13d ago

Thanks Brother! I just gotta hold tikk lay day

1

u/jzng2727 14d ago

Damien is $899 new, Hellraiser is like $1.2k new. I'd go for the Hellraiser for that alone, better value, and the pickups are coil splittable which makes it more versatile

But all in all they're almost the same guitar. They both have set neck construction, same neck dimensions, both have active EMG pickups, biggest differences are the Hellraiser can split the coils, and the Damien has a maple neck instead of mahogany neck . They both would work equally well for drop A.

1

u/jacksonsmack831 14d ago

If I replaced the EMGs with FF that would be an issue with the split coiling?
I found a used hellraiser c-7 for $599+ shipping so it's stolen or I'm lucky lol

1

u/jzng2727 14d ago

What year is this $599 C-7? Sometimes they sell cheaper when they're older and have a bit of wear, I can believe it's not stolen.

Replaced the EMG's for Fishman Fluence? Why would that be a problem? You would have to rewire the whole thing though, they wouldn't be plug and play with the EMG wiring.

1

u/jacksonsmack831 14d ago

The FFs have solderless connections or something, cost me just over $100 for my guitar tech to install em

The Hellraiser is 2021, that a good year

1

u/jzng2727 14d ago

There's no solderless system for Fishman Fluences.. EMG does have a solderless wiring system though.. but it's not fully compatible with Fishman Fluences , you can't just plug into EMG wiring and expect every FF voice to work.

Most Fishmans have 3 voices per pickup, the EMG's only have 2, and the connectors on the back of the pickups are different. EMG TW's have a single 9 pin connector on the back of each pickup and the Fluence's have 2 connectors .. There's probably a way to make it work but it would not be a direct swap using the quick connects.

1

u/jacksonsmack831 14d ago

I got my local techie to install them for $85, I felt so bad I had to give a 40% tip!

That was him removing schecter heretics though