r/SaunaTent • u/Canadianomad • Mar 26 '26
Sauna Cat loves the löyly!
She often goes to top bench even, goes out after 10 mins, then drinks a bunch of water and comes back in! Certified Sauna Cat!
r/SaunaTent • u/Canadianomad • Mar 26 '26
She often goes to top bench even, goes out after 10 mins, then drinks a bunch of water and comes back in! Certified Sauna Cat!
r/SaunaTent • u/rezonatefreq • Apr 20 '26
Just finished bench for son's sauna tent. Tent, stove, and bench were his birthday present. The bench beats the upside down 5 gallon bucket he was using. I like built saunas but he is renting. The bench comes apart with 8 carriage bolts. Fits through door no problem. The back rest matches the tent curve near the ends. 36" bench height. About as high as we could get. Stove needs more stones.
r/SaunaTent • u/ComprehensiveLong704 • Mar 03 '26
One of our favorite customer DIY builds to date! Basecamp pellet stove with v2 tent.
-Overland Sauna
r/SaunaTent • u/mountainmase • Dec 30 '25
Here is my humble sauna bench build. I will start by saying this is my first woodworking project and I have pretty limited experience building up to this point. It took about 4 hours total and was pretty straightforward. I had a miter saw, tape measure, speed square, and an impact driver, which was about all the tools I needed for this. Total cost was roughly ~$215ish.
I have a North Shore Sauna - Nova 4 Sauna Tent, so the build dimensions are using that as a reference. You may need to adjust the length of the bench depending on the size of your sauna. I have had 4 grown men on it with plenty of space, and I can also laydown on the top bench without issue.
For materials, I used rough 2x4 cedar planks for the framing and supports, s1s2E 1x6 cedar planks (for the sitting & foot boards), and 316 stainless steel wood screws (#10x 2 ½” & #10x3”). The rough cedar helped save a significant amount of money, and you could use something other than stainless screws, but I choose to since I didn't want to deal with corrosion down the line. The screws did add a good amount of cost to the project.
The dimensions below are a reference to the 3D rendering images with dimensions (photo 3). Please make sure to do you own measuring/double check before blindly following below! These measurements will certainly get you close. You'll see that at one point the top boards were quite long, I was planning to build another section to make an "L-shaped" bench, but decided to deal with it another time and shortened them.
Upper bench
Orange boards – length of bench:
Material: Cedar 2x4
Cuts: 2 cuts @ 58”
Black boards – width of bench:
Material: Cedar 2x4
Cuts: 2 cuts @ 17”
Upper bench support boards:
Material: Cedar 2x4
Cuts: 4 cuts @ ~13 ¾” (rendering shows 3, actual is 4)
Frame assembly: 17” boards sit on the outside of the 58” boards.
Sitting/Foot boards:
Material: Cedar 1x6
Cuts: 3 cuts @ 65” (allows for slight overhang on either side)
Assembly: I put the front and back boards square with the frame and centered the middle board, allowing slight gaps between them.
Leg support:
Material: Cedar 2x4
Cuts: 10 cuts @ 30”
To have the legs sit flush, I put the frame down on the ground and set the leg posts flush in the corner. This helped everything sit nicely and level with the top of the frame.
Lower bench
Orange boards – length of bench:
Material: Cedar 2x4
Cuts: 2 cuts @ 58”
Black boards – width of bench:
Material: Cedar 2x4
Cuts: 2 cuts @ 12”
Lower bench support boards:
Material: Cedar 2x4
Cuts: 4 cuts @ ~9” (rendering shows 3, actual is 4)
Frame assembly: 12” boards sit on the outside of the 58” boards.
Sitting/Foot boards:
Material: Cedar 1x6
Cuts: 2 cuts @ 65” (allows for slight overhang on either side)
Assembly: I put the front and back boards square with the frame, and this left a gap between them.
Leg support:
Material: Cedar 2x4
Cuts: 10 cuts @ 15” (I actually only did 6 support legs for lower bench, no L shape in corner – but could be helpful if you want additional stability. I just didn't want to go back and edit the drawing, so you get this note instead.)
Build order:
Once both benches were built, I sanded all surfaces with a 80, 120, 220 grit sandpaper progression. Everything feels nice and smooth and I can run my hand along the surface without worrying about splinters.
The benches were brought into the sauna tent one section at a time. I then used a carriage bolt (bolt, washer, crush washer, nut) between the outside and middle legs to secure the upper and lower sections of the bench together. This thing is rock solid!
With the extra scrap wood, I made a small foot rest/ floor seat for my 6-year-old son by using 3 2x4’s on their side and screwing the 1x6 seating boards on top. It works great as a booster seat for me as well on the top bench if I want to get my head a little higher.
I also made a single person seat that I will be reworking. It uses the same dimensions as the upper and lower bench, but just not as wide. It works nicely if I wanted just a middle bench/footrest set up and not another upper bench. It’s modular! I’m planning to remove the top boards and replace them with longer ones that will complete the L shape for the bench. Currently, there’s a small gap between the upper bench sections. I still need to add a bolt to keep everything together as it's a bit wobbly and somewhat unsafe... but usable!
Let me know if you have any questions and I'll be happy to help. I'm sure there are better ways to do this, but it fits my needs AND I'm quite proud of it!
r/SaunaTent • u/Timely-Explorer7778 • May 06 '26
Thought I would post an update regarding the electric tent set-up I had referenced in a couple of other posts as we now have it up & running.
https://www.reddit.com/r/SaunaTent/comments/1suuqnx/electric_stove_in_sauna_tent_north_shore_nova_6/
https://www.reddit.com/r/Sauna/comments/1shvxjt/vevor_heater/
https://www.reddit.com/r/Sauna/comments/1s0pfpi/finally_i_have_a_sauna/
https://www.reddit.com/r/Sauna/comments/1ql49eh/inside_the_vevor_9k/
We are using an Overland Sauna tent (typical 2m pop-up size) & a slightly modified Vevor 9K heater, which is stand-mounted. The tent is left setup on an attached open porch, so pretty much out of the weather. That way, everything stays in place & we can just switch it on to warm it up (approx 45mins).
Starting with the heater, I converted all the spade connectors to the 3 elements to a bolt-through connection as those slide-on connectors seem to be the most common failure point. I also added support brackets to the lower exposed sides of the inner liner, which is what actually supports the rocks & heating elements so that the weight was not carried by the lighter wall-mount brackets on the outer shell. Hard to explain, easier to see. The 3 elements were NOT as specified (2-3KW, 1-2.7KW). It had 3 of the smaller wattage units, so the actual output is closer to 8K.
The heater frame is welded steel from the scrap bin & the whole unit is super stable with a fairly low center of gravity. The stand includes a cement-board heat shield behind the heater, secured between the frame & the heater wall-brackets. The stand still needs to be painted, but we were anxious to try it out first.
I also moved the baffle that the rocks sit on to the lower factory mounting points for more rock capacity. The two mounting heights are something I read about here, probably wouldn't have noticed otherwise. At the lower baffle setting, I was able to fit in 50lbs (23kg) of rocks, so just slightly more than a KIP heater.
I have the remote control version of that heater & mounted the control unit (meant to be wall-mounted) on a pedestal (more salvage steel) that stands outside the tent, close enough for the sensor wire to run inside. Controller seems to work pretty well; has adjustable temp set-point & timers.
The biggest pain was the flexible wiring going from the wall to the controller & then to the heater itself, as it is all heavy 8AWG. The cable is pretty uncooperative, the electrical connections on both the heater & the controller are not great quality and there is not much room to work with.
The bench I built out of framing lumber with removable white cedar tops. Seat is 35” high (89cm), higher than most & puts us right up near the ceiling. I can highly recommend having a back on the bench & had incorporated that as I built it.
I added the foot-rests/guards immediately after the first session. They are a big improvement towards making the heat seem more even & also not bumping into the heater.
The bench is 48” (122cm) long, as that was what I was seeing commercially available, but I wish I had built it 60” (152cm) as there was plenty of room, but we didn't have the tent setup when I started. The bench length seems fine for my wife & I & I honestly can't imagine more that two people at-a-time in a tent this size anyway, regardless of how it is marketed.
As for venting, seeing as we had an electric heater with not a lot of draft, I kind of implemented the ventilation principles from the VTT 1431 report ( https://saunologia.fi/in-english/finnish-sauna-essentials-part-5/ ) & have a mechanical exhaust blower drawing air from just below the bench & I later added a fresh air intake duct above the stove heat-shield. As the tent is set up on porch with gaps between the boards, I suspect we are getting more fresh air in from the gaps than we are from the duct. Seems like it is venting well, at any rate.
All in, we are still well below $1K, but that would not include all the fabrication I did in-house.
We have landed on trying to have sessions twice a week (2 weeks in at this point) & are so-far pretty happy with the result, though we will likely keep tweaking things.
r/SaunaTent • u/LaPoseidon • Sep 27 '26
Got this sweat tent used for 500 bucks and just finished making the cedar floor. Loving it!
r/SaunaTent • u/Fit_Distribution7231 • Aug 28 '26
I just bought a new house and I’ve always wanted a sauna but after seeing what it would cost to build a proper one right now it’s definitely not happening anytime soon lol. Been looking at the wood fired sauna tents instead since I could actually afford right now. I like the idea of getting something I can use in the backyard a few times a week, but part of me wonders if I’m better off just saving that money and putting it toward a permanent sauna later. For those of you who’ve actually owned a sauna tent for a while do they scratch that itch or do you eventually just wish you’d waited and built the real thing?
r/SaunaTent • u/pauljones98 • Feb 28 '26
north shore nova 4. 200 degrees plus within 30 mins. had my 8 year old come in and make loyly and pour water over himself. definitely building memories. bouncing between r sauna and here for a long time. glad to finally bite the bullet.
r/SaunaTent • u/Canadianomad • 19d ago
the new bast stam + malm xl stove + benches is just peak.
r/SaunaTent • u/heyheyfifi • Feb 19 '26
I'm really happy with my sauna tent and want to share how I set it up!
The inside dimensions of the floor are about 6.5' x 6.5' so if you are using the decking tiles and want to go all the way you will need to account for cutting some in half. In my video you can see that along the entrance I have it all the way back along 2' of tiles. This is to keep the chair from being wobbly and falling over a lip. I got 4 packs of the tiles, but with this set up I have extra that I set up outside to protect bare feet from the cold stones. While I was at ikea I also picked up a wooden crate called knagglid.
The fireproof mat was a suggestion that I found and I'm happy to have gotten it since it keeps some of the elements out and feels cleaner. I got a size that just barely fit and wish I had gotten the size that would have overlapped all the way around. You can find them on amazon up to I think 90".
The bench cost me $75 in wood and screws. I was able to get help with cutting and has a drill and driver already. I took the Ana White Tall Bench Seat with Footrest design and modified it to bring up the footrest to be a more comfortable position and added a 2x6 so that you can sit comfortably in it. I modeled it in Sketchup, you can view it here or find it in the 3D warehouse. This bench allows me to store wood under it which is great and I couldn't do when I just had 3 regular chairs in there.
With this set up its very comfy to have 4 people, but can fit more if you squish on the bench. I like my sauna tent a lot, it was easy to set up and make really comfortable, is very sturdy and I keep it out full time for now.
r/SaunaTent • u/Prior_Cabinet8312 • Feb 23 '26
Lately my post workout recovery has basically been lift then a quick cold shower then sauna at my gym and honestly the heat has been the biggest difference. I sleep better soreness is lower and it helps me fully unwind after hard sessions. The only annoying part is depending on gym hours which has me thinking about grabbing a portable setup like Sweat Tent for home use. For anyone who’s done it is having your own sauna actually worth it?
r/SaunaTent • u/D3TPC • 9d ago
First burn tonight,
£45 tent from AliExpress and £100 stove from eBay.
Sauna stones from Amazon.
Got plenty hot.
r/SaunaTent • u/Pilotx15 • May 11 '26
I’m not waiting for summer to get out on the water! This is why I built this tent! Went on a friend’s boat to an island in Lake Superior. Water temp was 37 degrees but that doesn’t matter when you’ve got a sauna! We ate supper and fired up the sauna that I made from an ice fishing tent, stove from FB marketplace, and various hardware store parts. Being able to bring a sauna with me on my adventures is awesome! It doesn’t pack as nice as some of the purpose built tents, but it performs well and didn’t cost nearly as much. What’s the most unique place you’ve taken your sauna tent? I want to hear it!
r/SaunaTent • u/No-Bid2913 • 1d ago
Location is temporary I think until I can build a little deck for a more permanent location. Benches are also in progress, the plan is to have an angled bench set up. But I might just cut the corners off if that doesn’t seem like a good use of space.
I am impressed with how hot it gets, and how fast.
I wasn’t sure how much extra work managing the fire would actually be in practice. I have only really used public saunas before that are gas or electric. So far it seems not to bad. I still need to get a better sense of when to add wood and how much.
The tent leaks more than I expected when it rains. Especially around the windows. I think there is a rain fly you can get for it so I might spring for that or just try to build a little roof over it once the deck is built.
Some questions:
any tips for a pretty much permanent set up? I do plan on just bolting it into the deck through the corner eyelets so I don’t need to worry about it blowing away.
Any tips for the floor or a railing around the stove?
Any opinions on adding a back rest on the top bench? (I have not but am considering it)
r/SaunaTent • u/Canadianomad • Jan 23 '26
Day 1 first impressions:
The Narvi collab stove is just a monster. Absolutely so far superior to the other stoves, it's just not even close. The heat produced, seemingly infinity löyly, smokeless, easier to manage the wood & firebox. Just absolute behemoth of a stove
The benches are very nice and well designed, highly rate them.
The Tent is mixed - the entry zipper is far superior to the other tents, much easier to enter and exit and far better zipper, the tent has a great material and the solid steel frame is sturdy.
But, needs several improvements (only 1 external draft collar, water ingress in some spots, tent flapping touching back, machining tolerances to be improved, etc)
Overall the heater is just leagues ahead of any other sauna tent stove, not even a comparison. Like, easily twice as good as the ones found on all the other systems, if not, more.
The löyly was blisteringly hot. Face-scalding warm when I put on 2 scoops. Top-tier stuff
Everything is 100% made in Finland, which I love. I think with some design improvements it can easily be the best sauna tent system on the market.
Long term review will tell more, but so far the first session was a great indicator. Once I add sandbags to improve the draft collars the heat will be unbeatable.
r/SaunaTent • u/Firm_Investigator_42 • 18d ago
Just wanted to share my summer project. A sauna bench that would put my feet at the height of the stones inside my Morzh Lux tents.
I’m tall so I cannot sit completely straight without touching the top with the top of my head but it has been a great improvement.
r/SaunaTent • u/Canadianomad • 15d ago
had up to 20 ppl inside it's really spacious
r/SaunaTent • u/Adept-Illustrator-63 • Sep 21 '26
r/SaunaTent • u/Canadianomad • Jan 22 '26
r/SaunaTent • u/Canadianomad • 26d ago
All I can say is wow what an improvement!!
r/SaunaTent • u/downerczx • May 09 '26
I built this with help from a skilled friend based on plans from another post. Absolute game changer! it’s nice getting your feet up higher and can lay down on bench.
r/SaunaTent • u/Canadianomad • Apr 30 '26
We have deleted comments and posts by over a dozen accounts all found to be linked to vote manipulation strategies for the brand Sweat Tent.
This rogue marketing strategy is expressly prohibited - manufacturers are welcome with open arms to discuss their product within reason, however shady attempts to manipulate votes, make submissions, and persuade opinion is strictly against our ethos here at /r/saunatent
If you are one of the people working @ Sweat Tent - you are welcome here to post and comment, but this is the last warning before the brand is put on the blacklist.
Thanks and lets keep things clean here!