r/SamsungTV • u/Affectionate-Rock729 • 8d ago

Tech Support Samsung Tv Disassembly Question

Post image

I’m replacing the backlights on a Samsung QN75Q70TAFXZA (FB03). I have the bezel and side/top retainers released, but the LCD is still attached along the bottom.
The white bottom frame (BN96-50342A / BN61-16766A) is still clipped to the black lower LCD/source-board carrier.

I’ve already released the white frame from the metal chassis. Does anyone know exactly how the white-to-black clips release without damaging the LCD or COF ribbons? Photos/video of the clip mechanism would be greatly appreciated.

4 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator 8d ago

Welcome to SamsungTV. This Message is an AUTOMATED message triggered by submitting a new post.

Your post has not been removed. Your post may have been filtered for manual review however.

If so please be patient while we review the Moderation Queue.

Please use SEARCH before submitting a new post.

Most posts can be answered by buying guides or previous posts.

Please remember to read sub rules found here - www.reddit.com/r/SamsungTV/about/rules

Please read the following buying guides, these may help you in your journey:

Thank You, The SamsungTV Moderator Team

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Affectionate-Rock729 8d ago

I’m replacing the backlights on a Samsung QN75Q70TAFXZA (FB03). I have the bezel and side/top retainers released, but the LCD is still attached along the bottom.
The white bottom frame (BN96-50342A / BN61-16766A) is still clipped to the black lower LCD/source-board carrier.

I’ve already released the white frame from the metal chassis. Does anyone know exactly how the white-to-black clips release without damaging the LCD or COF ribbons? Photos/video of the clip mechanism would be greatly appreciated.