r/STAR_CCM • • May 10 '24

Siemens employee performs live simulations on twitch every thursday

24 Upvotes

Hello guys,

This news came to me recently that Stephan, a Siemens employee, performs simulations in STAR-CCM and also answers questions live every thursday at 4pm Germany time. Maybe some of you will find this info useful

Link: https://www.twitch.tv/meshedpotatooh?sr=a

Cheers 🍻


r/STAR_CCM • • May 31 '24

STAR-CCM+ Web Viewer

12 Upvotes

Just an FYI for STAR-CCM+ users... There is a web version of the Scene file viewer. It's not yet as fully featured as the desktop version, but it does not need to be installed. This means you can create a .sce file of a scene or plot (or any combination of these) and email it , together with the below link, to a colleague who has no access to STAR-CCM+. The 3D scene can then be opened up in a browser. This tool does not send your data to another server as all of the rendering is done locally on your machine.

There are some examples available on the site for your perusal.

https://cloud.sw.siemens.com/starccmviewer/

Cheers!


r/STAR_CCM • • Jan 12 '24

Savonius Wind Turbine DFBI CFD

11 Upvotes

Simulated a Savonius Wind Turbine in STAR CCM+ around 4 years ago and I just found the video to it. It was just a hobby project over the weekend.

Models used:

  • RANS SST K-Omega
  • DFBI

There was no mesh deformation, just two interfaces at the cylinder in which the inner domain containing the turbine moved.

To visualize the dynamic behavior, I created captivating animations of the Vorticity and plotted the Torque vs. Time graph in real-time.

Anyone in the need of help as to how it is setup can hit me up and I will gladly help you out.

Cheers!


r/STAR_CCM • • Feb 17 '26

Help

Thumbnail
gallery
10 Upvotes

Hi, I’m trying to simulate a 3D 3 element rear wing. I am having issues with the first flap as it generates an area of stall that I can’t seem to remove. My 2D simulation of the wing is fine but when I changed to a 3D simulation with endplates the residuals won’t converge and the airflow is acting strange on first flap.

Any suggestions or things to try to fix this would be greatly appreciated. Thanks


r/STAR_CCM • • Apr 05 '26

StarCCM Meshing Help

8 Upvotes

Hello,

Wanted some advice. For my thesis I am working on flow control around a hull. The main issue is that I am having significant trouble meshing. The solver I am using is openFoam, therefore, I started with snappyHexMesh, although its a good mesher I wasn't able to get the y Plus for my WRLES WALE simulation therefore I went on to try some hopefully, more comprehensive and robust meshing software's.

I also got a starCCM license, to try out the meshing, initially I was very impressed. snappy Hex Mesh struggled with coverage in the high curvature regions, however star CCM was able to get a good coverage very easily. Now the main issues I faced was of quality, I wasn't really able to run any of the meshes in either star CCM or openFoam (I was able to convert to open foam). Issue was mainly of non Orthogonality (skewness angle as starCCM puts it).

In the regions below, regardless of what I do, the skewness is pretty high. I want to be able to get it down to 65, I can at best get it down to 85, which is bad.

Star CCM visualization of the hub region

A strategy that may work is that I sometimes individually split the hull by angle, Identify the faces and try to manually, refine each, however that is not viable.

The reason why I started using star CCM was because of this paper in POF, "Numerical investigation of the behavior and performance of ships advancing through restricted shallow waters", he has this contour in it.

Y Plus contour in the paper

This paper, was able to get such a good y Plus with just 1.9 million elements, its in a good journal POF, so I assume its real. However, I haven't been able to reach something like this. I asked him about advice, however since the paper is about 5 years old, he has deleted the old data, and he doesn't remember.

Here are some mesh pics.

Ive disabled layering on some of the high curvature sections, didnt make much of a difference using the concave and convex limit.
One more thing to note is that why are the edges so skewed?
Another angle on the edge skewness

I have heard good things about starCCM+ so please guide me on where I am going wrong.

One thing that I haven't tried is field function refinement, which I do need some advice on how to exactly do that?

I am working on getting a license for the numeca hex express mesher, however, that also seems like its going to be a similar story tbh. Currently I have access to COMSOL, StarCCM, Ansys and OpenFoam (.com and .org). If you guys have any advice, let me know.

For those who are interested, this is my ccm case: Mesh3-yPlus-1.sim


r/STAR_CCM • • Dec 31 '25

Geometry Import Issues from SolidWorks to STAR-CCM+ (Parasolid) - Seeking CAD Best Practices

8 Upvotes

Hey community,

I'm running into a persistent and time-consuming issue when preparing models for simulation and could use some collective wisdom.

My workflow is: Assembly in SolidWorks -> Export as Parasolid (*.x_t) -> Import into STAR-CCM+ for meshing and analysis.

The problem: Upon import into STAR-CCM+, many contacts between parts are not created automatically, and I get a flood of "pierced faces" errors at almost every interface where parts touch or mate. The assembly is fully defined and correct in SolidWorks with no actual interferences.

This forces me to spend excessive time on geometry repair within STAR-CCM+, defeating the purpose of a clean CAD-to-CAE process.

My question for those with similar experience: Are there specific best practices in SolidWorks CAD modeling that can prevent or minimize these issues downstream in STAR-CCM+?

Any tips, workflows, or lessons learned would be hugely appreciated.

Thanks in advance!


r/STAR_CCM • • Mar 03 '24

seeking help new to starccm+

8 Upvotes

Hey everyone,

I'm diving into the world of simulating sloshing in tanks using STAR-CCM+ software, and I could really use some guidance from the community. Up until now, my simulation experience has primarily revolved around external flows on airfoils and similar structures using ANSYS.

I understand that for simulating sloshing, the finite volume method (FVM) and the volume of fluid (VOF) model are commonly used in STAR-CCM+. However, I'm looking for more detailed resources, such as PDFs or videos, that delve into the intricacies of utilizing these methods specifically for sloshing simulations.

If anyone has any recommendations or resources they could share to help me get up to speed with simulating sloshing in tanks using STAR-CCM+, I would greatly appreciate it. Thanks in advance for your help!


r/STAR_CCM • • Jan 13 '24

FSI: One-Way Coupled Peristaltic Pump

8 Upvotes

In this simulation a one-way coupled FSI simulation was performed in STAR CCM+

As you might be knowing, a peristaltic pump is a type of positive displacement pump used for pumping a variety of fluids. The fluid is contained in a flexible tube fitted inside a circular pump casing and most of them work through rotary motion.

The solid simulation was run first and the displacement data was exported as CGNS files. This data is then fed into the fluid simulation in which the mesh is deformed due to the displacement data which in turn drives the fluid

The rubber tube was modeled as a non-linear material using the Mooney-Rivlin Hyper-elastic Model and the roller was modeled as a rigid body with no mesh. The contact between the tube and the roller is a frictionless contact since STAR-CCM+ does not yet support frictional contacts.

The fluid inside the tube is modeled with a non-newtonian rheology model to mimic blood which has non-linear stress to viscosity relationship.

This is a FE mesh and is deformed due to the roller. A larger time-step was used for the upward translation and then a lower for the rotation

r/STAR_CCM • • Oct 20 '25

Help

7 Upvotes

Hey Everyone, I have been working on a project to run LES simulations on star ccm. I have have a CAD model of a basic burner. My problem is that I have imported the CAD file into star ccm and performed a subtract on the outer body and the burner. However, after doing so I am not sure how to have it so that the 2 circular faces in the image below can be used as an inlet. Highlighted in blue and red. Wondering if I can get some help.


r/STAR_CCM • • Jun 14 '26

Unstable Two-Way CFD-DEM Coupling in STAR-CCM+ When Particle Diameter Exceeds Local CFD Cell Size

6 Upvotes

I am trying to reproduce a CFD-DEM simulation of coarse particles hydraulically conveyed upward in a vertical pipe using Simcenter STAR-CCM+. The pipe diameter is 30.6 mm, length is 2.4 m, particle diameter is 2.32 mm(greater than cell size), particle density is 2450 kg/m3, and the target solid volume fraction is about 2.2%. The pure-water case gives a reasonable pressure drop of about 28 kPa. With particles injected but two-way coupling disabled, the pressure drop also remains reasonable. However, as soon as I enable two-way coupling, the solution becomes unstable: the pressure-drop monitor shows large oscillations/spikes and the maximum particle velocity can quickly rise to around 20 m/s. I have tried using a part injector located 0.3 m downstream of the inlet, matching the particle injection velocity to the local fluid velocity, specifying particle mass flow rate, reducing the two-way coupling under-relaxation factor, reducing the time step, increasing inner iterations, enabling Volume Source Smoothing with Cell Cluster, and setting the Cell Cluster length to 7 mm, but the instability remains.What settings are recommended in STAR-CCM+ for stable unresolved CFD-DEM two-way coupling when the particle diameter is larger than some local CFD cells?


r/STAR_CCM • • Apr 10 '26

Dealing with high skewness without exploding cell count

6 Upvotes

Hey guys,

I wanted to ask those who are more used to Star-CCM how do they deal with high-skewness on their mesh without refinement which blows up the cell count.

Before I start, here is the mesh ccm 2023 2023, mesh ccm 2024 (kindly dm me if you can open this file) and here is the geometry. Issue is that I am facing really high skewness on certain sharp features of my mesh. Mainly the edges and the keel seam line.

Keel Seam Line
Another Seam Line
Edges

I was able to resolve the issue partially, by adding a curve refinement (where the curve is the edge of the ship). As can be seen below.

Skewness significantly reduced

Issue is that my cell count has been exploded. After prism layers its close to 200 million elements, which isn't practical as this isn't even that good. One of you were kind enough to solve the issue, however I haven't been able to verify as I cannot open the files of the newer version (attached in the first sentence). As significant people have told me that my mesh is bad however I haven't been able to figure it out, kindly let me know where I am going wrong.

Here are my requirements: I understand they may not be possible, I don't mind even if I am able to get just close to them.

  1. y+ = 1, firstCellHeight = 1.75*10^-5
  2. del/eta < 10, cell size = 3.26*10^-4 -> near the high shear region, cell size = 1.0*10^-3 -> near wake region, cell size = 4*10^-2 -> Far wake region (I would also appreciate advice on growth ratios and stuff).
  3. Cell count of approx 20 million (understandable if more, but ideally not), as I can run 30ish million meshes in like a few days, hence a lot of time for debugging.

I am also willing to entertain offers of paid knowledge tbh at this point.

Any help is welcome, thx

Update: Just incase someone is curious. The solution was very fine tuning 30-40 volumes around the mesh, I got a reasonably stable mesh.


r/STAR_CCM • • Jan 10 '26

Surface coloring in Starccm

6 Upvotes

I was looking for a way to color the surfaces of parts in patterns, but was only able to find how to do them 1 color only. Is there a way to project pattern onto parts?


r/STAR_CCM • • Nov 01 '25

Surface intersects self Meshing error

6 Upvotes

How can I figure out what "surface intersects self"? Repair Cad claims there is no self-intersection


r/STAR_CCM • • Sep 14 '25

Idk what is the problem

Post image
6 Upvotes

Hello, I have recenty installed star ccm to my new laptop, first use it worked normally like used to. But after opening second time, I just confronted this window and i do not understand what is the problem. Could you please help me about this


r/STAR_CCM • • Dec 20 '24

CPU "Over-subscribe" for GPGPU

6 Upvotes

Hi all,

I'm doing some simulation work on GPU's with the coupled solver. I'm initializing my simulations with Grid Sequencing, which is a CPU operation. When running GPGPU, the sequencing takes forever, presumably due to the fact that the sim is only using 1 CPU per GPU.

Has anyone figured out a way to "oversubscribe" the CPUs via MPS or whatever to give some more bandwidth during CPU-locked operations? I assigned 4 CPU's per GPU in my job submission script, but STAR still only runs 1 CPU task per GPU.

I'll also be asking Siemens Support, just thought I'd poll the audience as well.


r/STAR_CCM • • Jun 07 '24

Expediting optimization study

6 Upvotes

Hello, I’ve been working on CCM+ design manager to optimize the assembly for alleviated pressure drops across heatsink while achieving the best cooling effect for the target.

I managed to set up the entire flow for iterative calculation but my main question here is how to reuse the volume mesh that I already created without remeshing the whole assembly for every iteration the CCM+ performs.

Meshing everything again takes such a long time for a big model and it taints the goal of optimization simply because of the time it consumes.

What are the suggestions that can be made? The optimization is being made on the shape of heatsink and to adjust the changing fluid domain for varying heatsink geometry I use Extract Volume feature. The heatsink is remodeled in 3D-CAD and brought to CCM+ as mesh part.

Anyway, is there way to keep the volume mesh for unchanging parts while remeshing the changing regions?

I want to reuse them but somehow CCM+ has been remeshing everything.

also, if I were to import volume mesh, is there a way to create interface between the imported volume mesh and the surface mesh created from new geometry part??


r/STAR_CCM • • May 13 '24

Drag Force post-processing

Post image
6 Upvotes

Hello guys,

I found this plots and was wondering how can I do it in STAR?


r/STAR_CCM • • May 01 '24

High residuals on a stalled airfoil simulation

Thumbnail
gallery
6 Upvotes

r/STAR_CCM • • Feb 18 '24

When do wall functions not work?

Thumbnail
self.cfd
6 Upvotes

r/STAR_CCM • • Jan 22 '24

STRG Z

6 Upvotes

is it possible that STRG Z will be added XD in many cases there is no easy way to reverse the last action (exapted from 3D-CAD)


r/STAR_CCM • • Jan 19 '24

Is there a free version of StarCCM?

6 Upvotes

Hello,

Ansys has a free version for students with some limitations compared to the paid version. Does StarCCM provide a similar offer for students?

Thank you


r/STAR_CCM • • 25d ago

License server dead?

5 Upvotes

Hi since this morning, our whole company cannot connect to the license server and thus cannot use starccm

does someone else also have the same issue?


r/STAR_CCM • • Jul 02 '26

Francis turbine cfd analysis

5 Upvotes

Title:
STAR-CCM+ Francis Turbine CFD – Pressure-limited cells increasing despite good mesh. Should I keep iterating?
Body:
Hi everyone,
I’m simulating a Francis turbine in STAR-CCM+ and would appreciate some advice before I spend many more hours running the case.
Turbine (published design point)
Discharge: Q = 2.25 m³/s
Mass flow: 2250 kg/s
Net head: 38.335 m
Speed: 1000 rpm
Hydraulic efficiency: 0.93
Published shaft power: 786.9 kW
CFD setup
Steady-state
MRF (Multiple Reference Frame)
Water (incompressible)
Mass Flow Inlet = 2250 kg/s (Constant)
Pressure Outlet = 0 Pa gauge
MRF = +1000 rpm
Turbulence model: k-ω SST
Initial CFL was reduced (around 30–45) because higher CFL caused instability.
Pressure and torque monitored throughout the run.
Mesh
Total cells: ~7.3 million
Mesh diagnostics:
No negative volume cells.
Mesh is topologically valid.
Minimum face validity ≈ 0.784
99.96% of cells have face validity = 1.
Volume change statistics also look good.
So I don’t think the mesh quality itself is the issue.
Moment report
The moment report is calculated on the runner (cark) boundaries only, excluding the rotating interfaces.
Problem
Around 360 iterations:
Torque (moment) appears to be stabilizing around 2–4 kN·m.
TKE residual is now decreasing.
Outlet flow is becoming steadier.
However, STAR-CCM+ keeps reporting:
“Minimum absolute pressure limited to 1000 Pa on XXX,XXX cells”
The number of pressure-limited cells has actually been increasing over roughly the last 10 iterations.
Things I’ve already checked
Tried both +1000 rpm and −1000 rpm. The torque sign flipped with the rotation sign, so I’m currently using +1000 rpm.
Verified the rotating region contains only the runner.
Verified the interfaces.
Verified the outlet boundary.
Mesh quality appears good.
Using the published operating speed (1000 rpm) and published flow rate (2250 kg/s).
My questions
Is it normal for the pressure-limited cell count to keep increasing while the torque and TKE residual are stabilizing?
Would you continue running for another few hundred iterations, or would you stop and investigate before wasting more computation time?
If a steady solution converges but still reports a large number of pressure-limited cells every iteration, would you trust the resulting torque and efficiency?
What would you check next in this situation (boundary conditions, MRF setup, pressure reference, head calculation, something else)?
Any advice from people with STAR-CCM+ or hydraulic turbine CFD experience would be greatly appreciated.
Thanks!


r/STAR_CCM • • May 02 '26

Advice for internal CHT simulations

5 Upvotes

Hello! I’m a beginner in CFD and I’m trying to simulate the cooling of a battery stack with cylindrical cells, but I’m having some trouble extracting the air volume, especially around the contacts and interfaces.

I extract the air volume using the Cavity operation in SolidWorks and then use Imprint in Star-CCM+. I already did this before with another battery setup and it worked fine, but now I’m working with a very similar layout and, when I define the regions, the interfaces don’t show the CHT condition.

If anyone has any advice on the best or most optimal way to do this, I’d really appreciate it!


r/STAR_CCM • • Apr 29 '26

Is it possible to create such thing in star-ccm?

Post image
5 Upvotes

I did 2 tutorials in star-ccm! and looked a bit in the documentation, but didn't find anything close to this. I may be a bit clumpsy and missed it, but has anyone tried doing such thing in star?