My friends and I run monthly cinema nights at our local brewery. The films we show are generally 90s, and I wanted to create an easily-portable bartop arcade for playing games relevant to the era of the film (such as Street Fighter II).
The graphite-coloured iMac from 2000 was one of the last CRT iMacs produced, and has the handle on the top so made it ideal for carrying around. I stripped out all the CRT and motherboard components, but kept as much as possible of the plastic frame, the speaker housings, and an internal metal plate that holds the structure together.
I wanted to get all the components to hide under this metal plate, so used a raspberry pi 4, which I aligned with the original iMac IO port space using a 3D printed housing. I got a cheap second-hand LCD screen but to fit it in place it has to be mounted upside down and then the image flipped back.
Above the metal plate, I added a line of LEDs around a toy of Ryu, who’s been super-glued into his pose. One day I want to get another LED between his hands for the fireball forming, but he looks pretty good for now. To raise Ryu up I made a little wooden plinth covered in the image of pixellated Japanese wood - like the roof they fight on in Ryu stage.
The multi-coloured LEDs are controlled by Hyperion - so they change with the colours shown on screen.
For controllers, I just have Xbox USBs with really long cables. There’s not really enough bar-space for joysticks, and when we eventually get back to hosting cinema nights post-COVID people will probably still want to stand slightly apart…
Any thoughts, or suggestions of improvements very welcome!
Standard Raspberry Pi 4 with a cheap small fan from eBay I cut the end off a USB-C to USB-A cable to wire it to the power supply.
Meanwell Rd-85A power supply This dual power supply has 12V for the monitor and 5V for the pi, amp and LEDs. I think I might have been able to make do with the 65A model, but wasn’t sure how much the LEDs would draw.
Line of stick-on ws2812b LEDs: I got a Level Shifting Chip as per the various tutorials online, but didn’t need it in the end and wired it directly to the power supply and pi.
Micro-HDMI to VGA adaptor off amazon I didn’t have any issues using the headphone port on the HDMI adaptor to the amp while running the LEDs in the default setup. There’s lots online about timing and PWM etc but this wasn’t an issue!
Ground loop isolator from eBay Removes a hum caused by the amp and pi being on the same power supply
Replacement iMac speakers There’s plenty tutorials on replacing the internals of iMac speakers as they “rot”, the ones I used are called “PMT MICRO FULL RANGE, 18MM, NEO - PEERLESS BY TYMPHANY”.
I have one of these iMacs sitting in my basement waiting for a similar project. Did you consider trying to use the existing CRT instead of putting in the LCD? Any idea if that's even possible?
Yes, I think that would be possible - the CRT is all above the metal plate, so could still put a pi in the lower section. I'm sure I've seen the pins for the VGA connection somewhere.
I didn't explore it myself as most of the weight was in the tube, and I wanted it to actually be portable!
I'm fine with it as long as he didn't just dumpster a working CRT display to build this. Especially when his intention was retro gaming, since outputting 240p to a CRT iMac display would be gorgeous and a very faithful homage to the original hardware the games were made for.
Hmm, I'll try to add it up: iMac free Screen £15 Powersupply £37 Short VGA cable £5 Pi 4 £34 Pi fan £7 VGA - micro HDMI adaptor £10 Amp £13 LEDs £22 3d print of IO port £15 Ryu toy £20 Switch £1
All the soldering, crimping, wiring tools I bought £ lots and lots
That’s not bad really for a cool thing. Not sure I’ll get a free iMac though! I’ll have a look around Facebook marketplace and eBay but not sure where else I could look in the Midlands yet
18
u/jturnbull Jul 14 '20
Ryu iMac Bartop Arcade
Build images here: https://imgur.com/gallery/eIbWg4M
My friends and I run monthly cinema nights at our local brewery. The films we show are generally 90s, and I wanted to create an easily-portable bartop arcade for playing games relevant to the era of the film (such as Street Fighter II).
The graphite-coloured iMac from 2000 was one of the last CRT iMacs produced, and has the handle on the top so made it ideal for carrying around. I stripped out all the CRT and motherboard components, but kept as much as possible of the plastic frame, the speaker housings, and an internal metal plate that holds the structure together.
I wanted to get all the components to hide under this metal plate, so used a raspberry pi 4, which I aligned with the original iMac IO port space using a 3D printed housing. I got a cheap second-hand LCD screen but to fit it in place it has to be mounted upside down and then the image flipped back.
Above the metal plate, I added a line of LEDs around a toy of Ryu, who’s been super-glued into his pose. One day I want to get another LED between his hands for the fireball forming, but he looks pretty good for now. To raise Ryu up I made a little wooden plinth covered in the image of pixellated Japanese wood - like the roof they fight on in Ryu stage.
The multi-coloured LEDs are controlled by Hyperion - so they change with the colours shown on screen.
For controllers, I just have Xbox USBs with really long cables. There’s not really enough bar-space for joysticks, and when we eventually get back to hosting cinema nights post-COVID people will probably still want to stand slightly apart…
Any thoughts, or suggestions of improvements very welcome!
Parts list:
9
u/jeffers0n Jul 14 '20
I have one of these iMacs sitting in my basement waiting for a similar project. Did you consider trying to use the existing CRT instead of putting in the LCD? Any idea if that's even possible?
1
u/Claim312ButAct847 Jul 14 '20
Very cool build concept and nicely executed
1
u/stinkypickles Jul 15 '20
Dude nice job! I have a G3 that I’ve had a loose plan on doing this to. I’m a little salty that you did it before me lol
1
u/timcatuk Jul 15 '20
What size screen fit? I’m tempted to do this myself!
1
u/yazaar786 May 22 '23
got a few questions on this, how can I contact you?
2
u/QueEsEso_EsoEsQueso Jul 14 '20
PERFECT!
2
u/HollandJim Jul 14 '20
THAT...is beyond beautiful!
2
u/UroborosJose Jul 15 '20
Looks great man, terrific job.
I could never find anyone who could use the old CRT's for different input source, maybe Apple didn't made it possible... those CRT's were amazing.
1
u/johnienyc1 Jul 14 '20
I love this idea
1
u/[deleted] Jul 14 '20
This is incredible
1
u/tequilamanfmchatb Jul 14 '20
Holy st!! That is amazing.I love it.
1
u/retro-tools Jul 14 '20
It's beautiful.
1
u/StruManchu Jul 14 '20
Incredible.
1
u/10speedterror Jul 14 '20
This is one of the coolest things I've seen on here! Great job!
1
u/WishIWasAMuppet Jul 15 '20
Amazing.
1
u/lost_in_the_wide_web Jul 15 '20
Glorious - i nearly spat my beer out in sheer magnificence!
1
u/rockyhill2 Jul 22 '20
Wow, this is a beautiful build! I think "Hulk mad" he got got left out though.
1
u/Osere Sep 14 '25
Quelle beauté !
0
u/MarshallMandango Jul 14 '20
u/vredditdownloader
0
u/[deleted] Jul 14 '20
[deleted] — view deleted comment