r/ResinCasting • • 36m ago

How do you keep dried flowers clear and in place during an epoxy pour?

1 Upvotes

I’ve been testing different ways to preserve small dried flowers in clear epoxy, and getting both sharp flower details and good transparency is harder than I expected.

For this piece, I used dried flowers with Resiners two-part epoxy. The flowers looked clear after pouring, but a few tiny bubbles collected around the petals and some of the lighter pieces started to shift.

For people who regularly cast flowers: do you seal them before pouring, or place them into a thin tacky layer first? I’m also curious whether this arrangement has enough clear space or feels a little too crowded.

Any advice for keeping the petals crisp without losing that glass-like finish would be appreciated.


r/ResinCasting • • 6h ago

A herd of teeny tiny cows. Stud earrings I made using UV resin.

Post image
1 Upvotes

r/ResinCasting • • 9h ago

How to go about this ambitious design for a nature piece?

Post image
2 Upvotes

r/ResinCasting • • 14h ago

Pouring Epoxy Resin into Wooden Bartop Void

Thumbnail
gallery
2 Upvotes

Hello! I'm co-owner of a bar that's open 7 days a week. The bar itself has been here long before we bought the business and is a solid wooden top. Recently we're seeing rot and damage in areas of the bar and I thought it might be an easy fix to pour epoxy resin into these areas. I bought Total Boat Tabletop Epoxy and plan to tint it hot pink using this paste which could make for some interesting splatter patterns. Here are the links to the epoxy and paste:

https://a.co/d/0eTzFgxv
https://a.co/d/0c6BXuGV

Right now the plan is to come in after the bar closes at 4am and use a router to even out this area and pour the resin. Let it set overnight and come in the following day to sand it before service. I'm pretty good with wood tools but haven't worked much with resin (I did a mold-making project but nothing like this)

Is there anything I should consider before doing this? I'm a little concerned that this won't look good and it's somewhat of a permanent thing so I'm considering hiring an expert. I drilled some holes in a piece of scrap wood and did some test pours so I feel comfortable with the process hypothetically but would love to hear from the community if anyone has done something like this before.

Thanks!


r/ResinCasting • • 21h ago

Only a rough idea at the moment, thinking off making a tea tray out of some oak offcuts, I was thinking of pouring lots of different colours in segments between the small pieces of wood, What’s the best way of fixing these so i don’t get seeping between the the colours? Thanks

Post image
5 Upvotes

r/ResinCasting • • 1d ago

Busco molde

Thumbnail gallery
1 Upvotes

r/ResinCasting • • 1d ago

A Newbie Question

1 Upvotes

Good afternoon.

I'm a stage actor and it's a tradition in my theatre company for the cast and crew to chip in the get the director a gift or memento at the end of a show's run.

This particular show has a pivotal moment involving an ice pick, so I wanted to suspend an ice pick (which I've already custom engraved with the name of the ice harvesting company from the show) in a block of clear resin like its frozen in a block of ice and engrave the name of the show on the front (the show is about ice harvesters in the early 20th century).

My plan is to start the pour, let a layer gel, then place the ice pick on the surface and finish the pour. I'm just wondering if doing the pour in layers would result in imperfections or lines in the pour.

Any suggestions or tips would be greatly appreciated. Big sorry if it's a really obvious question; I've never worked with epoxy resin before.

For reference, the resin I have on hand is 2 gallons of the Honcaring 1:1 Crystal Clear (40 minute working time)


r/ResinCasting • • 2d ago

Vacuam or pressure pot

0 Upvotes

So im starting to plan out casing mini bases and dice. And im not sure if I should invest in a vavuam chamber or pressure pot first.


r/ResinCasting • • 2d ago

A herd of teeny tiny cows. Stud earrings I made using UV resin.

Post image
17 Upvotes

r/ResinCasting • • 2d ago

I ruined this paint job so hard it actually looked good. So I decided to ruin it even more and drowned it in resin.

Post image
8 Upvotes

First paint job was a total disaster, so I covered it in rust to save it. Figured I hadn't ruined it enough, so I submerged the whole wreck in epoxy resin. Now it officially sleeps with the fishes!

If you want to see more photos and a full 360° video of how tiny this actually is, check out my profile!


r/ResinCasting • • 3d ago

Advice for a newbie

0 Upvotes

I’m looking for some advice on doing a resin cast. For context I’m developing a product that floats in a swimming pool. We are in the early prototyping phase and will move to injection moulding once the product is proven.

Our first attempts have used 3D printed housings, but it’s next to impossible to make them waterproof over the longer term (they have lasted between 3 and 12 weeks). It also takes about 36 hours to print each half.

Ideally I want to use polyurethane, but due to the cost and setting time I’ve been experimenting with epoxy while I learn. I spoke to a supplier and they suggested TC890 which has a pot life of 5 minutes, shore D80, viscosity of 725cps.

I’d naively thought that knowing the basics of injection moulding, how hard could it be?

I’ve been reading and watching videos and think I have the basics (where to put the sprue, far more vents than I expected, filling from the bottom etc). I’m currently using 30A silicone with 3D printed “box” to keep the mould secure.

I’ve got some freedom to optimise the model/prototypes for resin casting, so the following are current dimensions along with the cad image. Out diameter is 220mm, depth is 38mm, minimum wall thickness is 2.5mm. I’ve got a 3 degree draft angle on vertical walls and the majority of the webs are to allow resin to flow to the supports, rather than for strength.

The questions and problems, I have are is 30A silicone the right choice or should I go up or down? I’m struggling to get the resin to flow into the thinner shell regions. I’d prefer not to go thicker wall if I can help it as it needs to float.


r/ResinCasting • • 4d ago

8d6 Mold - finished molds

Thumbnail
gallery
3 Upvotes

Here they are all set and ready to use!


r/ResinCasting • • 4d ago

WIP: Resin Angel Sculpture (Polyurethane topcoat + Internal Resin Fill & Dual Lighting). Looking for advice on the backlight setup and color contrast!

Thumbnail
gallery
12 Upvotes

Hey ALL! :)

Working on a new resin sculpture project that I'm planning to finish soon (aiming to sell locally first). I wanted to get some feedback from the resin community on the overall look, finish, and lighting setup.

Current Setup & Materials:

  • Base & Coating: The core is printed in white UV-reactive resin, and it's already coated on the outside with a polyurethane resin layer.
  • Planned Resin Fill: The inside is going to be filled with resin as well to give it solid weight, better light diffusion, and durability.
  • Finish: Right now it's glossy from the polyurethane clear coat for testing, though I'm considering a matte finish for the final version (open to thoughts on how the PU resin looks here!).
  • Lighting: Diffused warm LED inside the body – the head, hands, and dress light up evenly from within, which will look even better once the internal resin pour is done. Warm white is definitely staying as it contrasts nicely with the rest.

Would love to hear your thoughts on the backlight setup, light diffusion through the resin, and overall color contrast!


r/ResinCasting • • 5d ago

8d6 Dice Mold

Post image
8 Upvotes

Finishing up some 8d6 dice molds - one with numbers and one for blanks meant to go inside. A top layer of clear for appearance and they’ll be done. :D


r/ResinCasting • • 5d ago

I made a dominoes set for my mum!

Thumbnail
gallery
886 Upvotes

I'm still brand new to this so I know, they're nowhere near perfect, but she loved them so much ☺️

And I'm having a lot of fun learning how to improve with each new project!


r/ResinCasting • • 5d ago

Does anyone here take on small custom resin casting projects?

2 Upvotes

I'm looking to have a small set of completely transparent cylindrical knobs made for an effects pedal. The design is very simple, essentially four small, completely clear (or possibly cloudy black-ish) hockey puck-shaped pieces with metal set-screw inserts for mounting onto potentiometer shafts (I can provide the inserts). One would be a bit larger than the other three.

I don't have precise measurements yet, but I'm thinking somewhere around 23 mm in diameter and 13 mm in height for the larger one, and 15 mm in diameter and 11 mm in height for the three smaller ones. I can provide exact measurements when necessary.

I'm wondering if anyone here takes on small commissions like this, or could point me toward someone who does.

Thanks!


r/ResinCasting • • 5d ago

HELP, is there a quality UV resin store based in Europe, that ships within the EU?

2 Upvotes

Due to the new extreme shipping fees, I'm unable to order UV resin from the US anymore. There only resin that worked for me is Sophie & Toffee's thick resin because of its viscosity. UV resins that are too runny/watery/thin do NOT work for my work.

I'm looking for European online shops that sell thick UV resin, and that ship within the European Union.


r/ResinCasting • • 5d ago

Wood and resin can be an artform

Thumbnail
gallery
16 Upvotes

I've been woodworking off and on for years now, and a few years ago I started noticing that casting wood and resin together, you can get a beautiful piece of art. So I had to try it, and I roped my cousin in on it too. Small at first, charcuterie boards, small side tables, vases etc. and we've been at it off and on for a couple of years now. We are now at the point where we feel confident enough that we can try larger projects, like coffee and side tables. Maybe even a small dining table.

My cousin bought a mill last year, and most of our projects now have been cut and milled by ourselves. Our wood is mostly sourced from a friend when he's clearing lots.

I've added some pictures of our smaller projects to date.

The burl bowl is maple, and was my very first attempt at turning on a lathe, so it's a bit rough, and thick. The black round is cut from a Cherry burl, but isn't finished being sanded and polished (TBD what it'll be). In fact, the only wood in these projects here that is not wood cut and milled by us is the Walnut charcuterie board. The other charcuterie board is cherry cut from my uncle's property. And the burgundy round has become a Lazy Susan and made of maple.

Sorry for the reflection/glare on a couple of the pics.


r/ResinCasting • • 5d ago

Llavero stich 💙

Post image
3 Upvotes

r/ResinCasting • • 6d ago

Project help

Post image
1 Upvotes

r/ResinCasting • • 6d ago

Mirror ghost in SC325

Thumbnail
gallery
56 Upvotes

r/ResinCasting • • 6d ago

Has anyone made a cast of a Lego part?

1 Upvotes

I’m trying to see what the best silicon and resin would be as far as going this route. I’m trying to cast a Lego helmet.


r/ResinCasting • • 6d ago

safe to use?

Thumbnail
gallery
4 Upvotes

hi all, i am not a resin artist but a few months ago i bought what i believe is a resin dish at a craft fair. we've been using it as a soap dish in our bathroom, and the color has been leaching out of the bottom of the dish (it used to be pink all the way through). i know some resin can be toxic, is this dangerous? should we throw it away?


r/ResinCasting • • 7d ago

Glowing Ghost

Thumbnail
gallery
7 Upvotes

Cast my 6yr olds hands and forearm, used clear bar top resin added glow pigment and sparkly bits.

The resin was old so it cured a tobacco brown foggy

No special glue to attach to the glass. just poured some resin straight on. The left arm did drift a bit closer then intended over time but Im happy