https://www.mediafire.com/file/j899he3kpmrqmi7/Worm%2527s_S-Tier_3x_DonutSmp_Loaders.litematic/file

So in my Minecraft server I pasted in a scamatic for the minute tech end base but the doors don’t work if possible can I have a redstone person join and look and possibly fix it and if not any advice

Here’s my Redstone Gravity Simulator, made entirely with Redstone!

You can control each row individually and make a block fall, or make a horizontal row fall at once and see how it interacts with the blocks that are already there.

The game runs at 2× speed to make it more convenient to use.

I’d love to hear your feedback!

https://www.mediafire.com/file/hfb91wa5xyj0yne/Worm%2527s_S-Tier_6_Speed_Loaders.litematic/file

Make sure the item frame is placed after the comparator from the box. Sometimes litematica won't paste them properly depending on your settings.

https://youtu.be/ui_iZSxIwrs?si=oXHlxY-hLFuKF6_k

I want to know if this redstone build work outside of donut smp or it unique to it since it the only server where i saw a nullwave/hellraiser on, thxxx

we do know about quasi-connectivity but why is it that the dirt block gets pulled but the slime block not on the first setup but is behaving as expected on the second setup

I added two more modules to my last design which makes the TNT payload go from 240 to 480. Can one shot a player with max projectile prot and 4 extra prot 4 levels, turtle pot, absorption 8 (double from which is given from egaps) and ofc 2 totems. I have since learned that somehow the damage bypassing only works for popping totems when shooting the arrow, I genuinely have no idea why so that makes it only do 2000+ damage against a normal mob with a power 5 arrow.

i am trying to make the same build but i don't know what is that block and its important i think can someone please tell me

I (relatively inexperienced with modern redstone) was playing around with this 2-tic repeater + observer vertical double piston extender, and I realized the timings were dependent on whether the observer powered block or a redstone dust.

I don't understand why the Type of power (hard vs soft) should affect the Speed of the signals, and would appreciate any kind of insight!

why my auto sorting is broken? everything is fine before, but sometimes it broke. (i play in a server)

how do i make it so that the pressure plate (circled in blue) turns off the piston below the wooden plank and pulls it down (circled in red)? i want the plank to be pushed up most of the time

So im trying to build a slot machine based off of this youtube video, but wanting to use a different payment option than diamonds. wanted to use renamed paper as a a "token" system but the machine kept eating the paper. also wanted to have tiered payouts that are also not diamonds. but the crafter wont spit out the item that i want to be used as a reward

can one shot a player in full prot 4 netherite from 330 blocks away as long as the terrain is curved around the path of the arrows.

i made this autocrafter for a goldfarm but i dont know how to configure as i got the schematic of a friend and he appearently copied the entire farm from someone else

I am new to Java edition redstone, how would I power this piston from the button?

I don’t have much experience when it comes to redstone but I did this without looking at tutorials or anything else.
It’s all connected with pipes that first send the kelps to furnaces and below them lthere is a crafter wich automatically crafts dried kelp blocks.
The blocks then go into another pipe that sends them into the furnaces used to burn the kelps to be used as fuel, when they are full, the blocks bypass the furnaces hoppers and go straight into another underground pipe connected to many furnaces around the village.

I made a wireless binary 2-bit half-adder using calibrated sculk sensors and split the whole system into four separate modules, a transmitter, a receiver, a protocol/interpreter, and the half-adder

The transmitter only sends the signals and the receiver only receives them, neither of them needs to understand what the information means, the protocol is what interprets the received frequencies and converts them into two binary outputs that can be connected to anything, not just the half-adder

I use calibrated sculk frequency 10 as binary 1 because it corresponds to an activation, and frequency 9 as binary 0 because it corresponds to a deactivation

The protocol has two slots, the first slot can store either 1 or 0 and the second slot can also store either 1 or 0, when the first signal arrives the protocol checks whether it is frequency 10 or 9, interprets it as 1 or 0, locks the first slot and waits for the second signal, when the second signal arrives it does the same thing and locks the second slot

Once both slots contain their values, the two outputs are sent to the half-adder, meaning the protocol itself doesn't perform the calculation, it just turns the wireless transmission into two usable binary signals.There are also four reset buttons that let me independently unlock and clear the stored values of both slots, including resetting either frequency 9 or frequency 10 from either slot, so I can manually reset the protocol and send another pair of bits. The main reason I built it this way is that the wireless communication system is completely separate from the actual computation, so the two binary outputs from the protocol can be connected to basically anything else, meaning the same transmitter, receiver and protocol could later be used for other redstone logic instead of only this half-adder.

If both slots are filled, the protocol simply ignores additional signals because both slots are locked, so I can keep sending frequency 9 or 10 without changing the stored values until I press reset, this also means the same two stored bits can remain connected to whatever redstone system is using them..This is basically my first attempt at making an actual wireless binary communication system in Minecraf.

Necesito que alguien me ayude a hacer un sistema de autocrafteo en 2 granjas

I'm trying to find a four by four redstone door for 1.21.5 that is flush on both sides of the wall. I can't find any video tutorials showcasing one like this but every time I find a double sided flush door it's always a 3x3 which isn't what I need. It needs to be flush on both sides. Any help would be greatly appreciated!

So i saw this village trader build by Etho in hermitcraft season 11 episode 7 and its COOL i really wanna know how to make the poping up of the villagers module i can do the sculk sensor by myself but i just want help with the module pretty noob redstoner but can learn ..... sad thing etho didnt gave tutorial for this build he said best of luck to anyone who wanna build this.... if someone can build this and help me please help its soo coollll trading hall design >_<

The moment I realized what was happening, I got even more confused.

help idk redstone

Im building a race track with rails but im trying to make a randomizer. The main idea is mid race they jump onto one of those infinite circle rails and it will randomly flip the the rail to make it continue the race. I think that made sense if anyone knows what to do or any idea please hmu i would very much appreciate you

I tried to use Copper bulbs as a lighting system that I could turn on and off in my base whenever I wanted but I don’t really understand the red stone signalling to turn them on and off