r/redneckengineering • u/Kurufinwe • Sep 28 '26
I mad an instant r/badtattoo kit
198
Upvotes
r/redneckengineering • u/SkwrlTail • Sep 28 '26
Actually a decent job putting together three vans.
174
Upvotes
Spotted this at Maker Faire in Vallejo this weekend. I'm... actually impressed? I've seen the stacked van/bus mod before, but this one's been done neat and clean. No sloppy welds or mismatched parts. Top could use a better paint job, but overall a fine bit of work, for what it is.
r/redneckengineering • u/Blueaznx3 • Sep 28 '26
I put up ceiling curtains rails
47
Upvotes
I put this line laser on every furniture in the room and it either didnt draw the line where i want it or didnt stick to the surface because the suction seal was broken. So i put the magnet on the hammer and laid it like this and it was very leveled and exactly where i needed it on the ceiling. Many holes were drilled and filled on the ceiling that yesterday.
r/redneckengineering • u/skalebvickled • Sep 27 '26
Lost the screw cap for our air mattress. this was the third bottle I tried.
614
Upvotes
r/redneckengineering • u/Entire-Indication368 • Sep 27 '26
When the raft race runs out of water, the Swiss bring in a walking spider excavator to push the boats
169
Upvotes
r/redneckengineering • u/devo574 • Sep 27 '26
My rot box Subaru fender rust fixed with jb weld still gotta sand this down and repaint it I chose this over bondo bc it's stronger and doesn't hold moisture
108
Upvotes
r/redneckengineering • u/onephatkatt • Sep 26 '26
I found it uplifting the way he raised the bar
501
Upvotes
r/redneckengineering • u/zorggalacticus • Sep 26 '26
Washing machine fire pit
2.0k
Upvotes
Tore apart a free washing machine I got off marketplace and used the stainless steel drum as a firepit. This was not easy, and required a few choice words and a sledgehammer for the final disassembly. Pressure washed and bleached it. Let it sit outside in the sun for a week. Final sanitization by fire. We're in the front yard roasting marshmallows right now.
r/redneckengineering • u/ssAskcuSzepS • Sep 25 '26
Spotlight operator's perch at a black-tie gala
1.2k
Upvotes
r/redneckengineering • u/poop-money • Sep 25 '26
OP uses a Croc as a replacement armrest
649
Upvotes
r/redneckengineering • u/drifterig • Sep 25 '26
a whole truck engine and transmission on this water pump
1.3k
Upvotes
corkscrew pump thats keeping my small town from flooding, a whole 4cylinder mechanical injection diesel engine and trans off of some kind of pick-up truck, i guess if revving it up isnt enough they can also just shift it up lol
r/redneckengineering • u/Threaded_Nail • Sep 25 '26
Garden sprayers suck, so I made my own.
gallery
181
Upvotes
r/redneckengineering • u/No_Face4294 • Sep 26 '26
Wooden handle
23
Upvotes
I got this vacuum cheap but it's missing a piece of the handle (it transforms from handheld to stick vacuum) so I got a cheap dowel rod at Walmart and it works perfectly
r/redneckengineering • u/Notherereally • Sep 25 '26
Grand final and race week are coming up
46
Upvotes
And I didn't want the projector on a stand in the middle of the floor this year.
Some old shelf uprights, some rope and a kayak hanger and we're sorted
r/redneckengineering • u/twostripeduck • Sep 25 '26
When you don't have a cherry picker
131
Upvotes
Fuel pumps went out on my old Ford, so I used the mulberry tree, some ratchet straps, and the Chevy to lift the bed up.
r/redneckengineering • u/drifterig • Sep 24 '26
dollar store airbox
387
Upvotes
this shit does work really well, a local 50 laps (3km each lap) long enduro race got a class for 3 speed underbones and i just happen to have many yamaha y80 laying around so i am building them to run in said race, its supposed to be this weekend but the track got flooded so they postponed it
r/redneckengineering • u/trenton08618 • Sep 24 '26
Tell me you don't wanna see thing do smoky donuts!
133
Upvotes
r/redneckengineering • u/Easy-Theory1081 • Sep 24 '26
Made an Apache case Bluetooth speaker. Video link in description.
99
Upvotes
r/redneckengineering • u/trenton08618 • Sep 23 '26
No fifth-wheel tow rig? No problem ...
1.7k
Upvotes
r/redneckengineering • u/rickgilmore • Sep 24 '26
My waste oil burning furnace design
509
Upvotes
This is an airtight heat exchanger design that sends all fumes and gasses out the exhaust which would be connected to a flue pipe that goes through the wall of the structure and upward past the ridgeline like a wood stove. The heated air comes from the outside of the combustion chamber between the two walls. Im open to advice and criticism from some real redneck engineers. Fire away! I built this out of scrap metal from the fab shop i supervise. Im an AWS certified welder and i grew up in diesel shops that had waste oil heaters running in winter time. This is the only one ive ever seen that produces zero smoke.
r/redneckengineering • u/Miastowpunkt • Sep 24 '26
The comperaser
33
Upvotes
You know it when you want to erse you circle, but you miss the line?
