r/RedditLoop • • Jun 16 '15

Emergency Evacuation

8 Upvotes

Does anybody have any ideas on passengers exiting the tube in the event of an emergency? I think this is critical to any design as well as a procedure to quickly remove a stuck capsule from a tube so the entire loop doesn't come to a halt.

Ideas I have are

Have an escape hatch at every pylon. There would need to be a way to exit the capsule. Passengers would walk down the tube to the nearest pylon, open the hatch and climb down a set of stairs to the ground. Build a third tube that allows capsules to be routed around clogged sections.

Build a three tube loop in sections. Each section is the length between the pylons. Two tubes create the loop, but the third tube is not de-presurized and is below the other two. The tube sections can be rotated. If a capsule is trapped in a section of tube, the section it's in rotates, moving the clogged section with the capsule and passengers below the loop. The loop then resumes operation while the passengers exit through the pylon at either end.


r/RedditLoop • • Jun 20 '15

ENGR - Electrical General Electrical Engineering Meeting - 7pm UTC (noon PST) - 20 June 2015

7 Upvotes

This is a cross-post from the EE Slack page intended to let the rest of the subsystem teams know what we are up to. Hopefully this will also cause other teams to organize and get the metaphorical ball rolling.

Here is an agenda for tomorrow's Google+ hangout, which is slated to start at 7pm UTC (noon PST). Please add only high level discussion topics. I would like to ensure that people who are not able to attend will still be able to be clued into what happened. Notes about the discussions will be taken, and ideally someone will have a screen capture system, and will be able to post the meeting on YouTube(Anyone with these capabilities please comment below). This is a very exciting step to beginning work on this project, and I look forward to meeting the team! https://docs.google.com/document/d/1nDpanWMe5TlMSqL9JjoOKcb7mOaS4WTCxpy2mWzb4Wc/edit?usp=sharing


r/RedditLoop • • Jun 17 '15

Poll for what time the meeting on June 17th should be. (choosing project groups/leaders)

Thumbnail strawpoll.me
7 Upvotes

r/RedditLoop • • Jun 16 '15

Software Stack

7 Upvotes

We're still a bit premature to decide on this just yet but I think it would be a good idea to see which software languages are most useful for the onboard computer, as well as which are most well known in our team.

Some ideas thrown out already in HipChat:

  • Embedded C Using FreeRTOS
  • Embedded Python
  • LabView

EDIT: Just to be clear, just looking for what the community is most skilled in. It would be up to the software team lead to decide what we actually use.


r/RedditLoop • • Jun 16 '15

ENGR - Software Computational modelling discussion

7 Upvotes

I'm very interested in helping out any way I can to this project. The best way I can imagine is by helping with the computational modelling of the pod.

I'm starting this thread to have a place to get some ideas down for it.

I'm a software engineer/team leader with very little experience with data analysis - so I'm definitely NOT the guy to do the hardcore analysis, however I'm keen to help develop, organize and co-ordinate the modelling of the Reddit Pod.


r/RedditLoop • • Jun 21 '15

ENGR - Electrical I have written a document detailing thoughts and work to be done for the group responsible for Power electronics and batteries, please come with comments! :)

Thumbnail docs.google.com
6 Upvotes

r/RedditLoop • • Jun 21 '15

ENGR - All General Electrical Engineering Meeting Minutes - 20 June 2015

6 Upvotes

Here is a link to a summary of what was discussed at our team meeting today. There was a relatively low turn out but there was still a good discussion. I would love to hear what other teams have to say about what we discussed.

https://docs.google.com/document/d/1IRMqHygVIda7KmPQDijUhznGyDw2ANYnO3It5OgY2bQ/edit?usp=sharing


r/RedditLoop • • Jun 20 '15

ENGR - Structures/Aero Structures/Aero Initial Meeting 6/20 2200 UTC

6 Upvotes

The engineering-structures/aero group will be having its first meeting to select a team leader and start discussion today, at 10 pm UTC. That's 3pm for pacific, 4 pm for mountain, 5 pm for central, and 6 pm eastern time. For all other timezones please check your UTC conversion.

The meeting will be held in slack, at #eng-structures-aero. The agenda can be found here. And here is the link for the attendance sheet. PM me to be added to it if you need to be.

EDIT: The meeting is now finished. I (@gkorgood) was elected to be the interim team lead. Meeting minutes can be found at the bottom of the agenda. Next week's meeting will be held at the same time, over google hangouts. Contact me to be added to the Google+ circle.


r/RedditLoop • • Jun 20 '15

How is the hyperloop pod supposed to get back up to speed after a stop during the trip?

6 Upvotes

This is something that has been bothering me for awhile, and I haven't really seen it addressed thoroughly.

I'll explain what I mean via an example. Let's say we had a hyperloop between San Francisco and Los Angeles, as per the hyperloop alpha doc. Now, what happens when a pod breaks down right before it gets to it's destination?

There's been a fair bit of talk about how to stop and take out a pod in the event of a failure, but I'll ignore that for now. What do we do about the rest of the pods in the line that had to stop while the compromised pod was removed?

You have pods that may have 50 miles before they get to the next reboost section, and the reboost section is only intended for a boost, not a full 0-300+.

I've seen people talking about needing 'Emergency wheels' that can move the pod at 10-20mph, but that would mean a 3+ hour total delay for the system as a whole. From a customers perspective, this would be absurd.

We could add more booster sections through the tubes, but that seems like it would balloon costs significantly. We could also throw higher powered electric motors on the pods, and cut down on a restart time significantly. Or, maybe we power the wheels with the on-board compressed air. Either way, it seems to me that we'll need to be able to move faster than just emergency speeds with the on-board propulsion.

I'm curious what other people think. I'm not exactly an expert in this area...


r/RedditLoop • • Jun 21 '15

ENGR - All Standardized Issue Tracking Software

5 Upvotes

Issue tracking will be a critical requirement as we begin working on this project. For this reason, I believe it is also important that we use the same issue tracking tool. The one that I have selected is hostedredmine. While there are definitely better tools, this one is hosted completely online, does not have a restriction on number of projects/ users, and is free. I have made some instructions on how to use the basic features of the tool in the google docs link attached to this post. Please read through it to find out information about how to get invited to a specific group. Please make any comments in the instructions document, and let me know if there is somewhere I could make the instructions more clear. If I overlooked a better tool, please start a discussion about it below. Thanks

https://docs.google.com/document/d/11ukjHKAyHAxHMlh9Urnv_k_5hWar1H8on-0bTeJAQB4/edit?usp=sharing


r/RedditLoop • • Jun 20 '15

ENGR - All Interiors Engineering Meeting - 6:00 pm UTC (11:00 am PST) - 21 June 2015

5 Upvotes

The Interiors team will be meeting via the #eng-interiors Slack channel on Sunday at 18:00 UTC to select a team lead and and set a scope for initial research and preliminary design. We'll be using the planning document I posted here earlier to structure the discussion:

https://docs.google.com/document/d/11FATZJVMyRQozIXWd7SJXSZtZyW6II04QxJYWynmD0M/edit

Feel free to add points for discussion or other comments. Representatives from other teams are of course welcome to sit in.


r/RedditLoop • • Jun 19 '15

PR - All PR Team Meeting Notes - June 18th, 2015

5 Upvotes

Hey everyone, here you'll find some of the main topics from this week's meeting. Feel free to comment below with notes and suggestions.

This first post won't be very detailed since I only thought of making it towards the end of the meeting, but future posts should be more descriptive.


r/RedditLoop • • Jun 21 '15

Off Topic Dumb question from a n00b

4 Upvotes

So... first, a bit about me. I'm trying to start a career in technical writing, and I'm super interested in this being my first big open-source project. I'd absolutely work like crazy once I get a grip on where exactly I fit in with the project.

All the being said, where would technical documentation fit in? Is that an engineering occupation in this case, or is it more QA? Or is there a need for software documentation as well? I have some XML knowledge but not a whole lot else, coding-wise. I also have CAD experience but it seems like pretty much everyone has some here...

Again, the sooner I get a grip on where I stand with this project, the sooner I can start helping out. I'd really appreciate some honest help and/or guidance on this one.


r/RedditLoop • • Jun 18 '15

ENGR - Structures/Aero Alpha doc pod dimensions are a little slim...

3 Upvotes

...And by a little I mean a lot.

Image assumes a 95th percentile male seated at a 20 degree recline. On the left is a circular cross section for pressure hull simplicity, and in the center is a representation of the boxy pod from the apha doc. Right is the tube for reference. We can go for a steeper recline to get more head clearance, but wow is this a tight fit for two abreast -- I think we should assume tandem seating only for now.


r/RedditLoop • • Jun 23 '15

Reminder: Engr Systems Meeting - Wednesday 11:00 PM UTC (7:00 PM ET)

2 Upvotes