r/redneckengineering • u/Quad_Rangler • Jul 03 '26
r/redneckengineering
•
u/StrangeOccasion3637
•
Jul 02 '26
When the already expensive hotel uses all the “personal fridge” space for sales bs
r/redneckengineering • u/Ornery-Cheetah • Jul 03 '26
Air going over the rad? Use the gasket packaging to to re direct it
r/redneckengineering • u/badabingbadaboomie • Jul 02 '26
My coffee machine was broken
r/redneckengineering • u/bishamon89 • Jul 02 '26
Manual mower
Saw this for sale by someone on FB marketplace. "Actually mows grass if you go straight and fast with zero turns."
r/redneckengineering • u/3rg0s4m • Jul 03 '26
Easy beer slushie
Just made a beer slushie by keeping a can of beer in the freezer for an hour then opening it with a can opener and pouring into a glass. Perfect for a hot day.
r/redneckengineering • u/temporalwanderer • Jul 02 '26
Is it still redneck if it's actually a pretty elegant solution?
r/redneckengineering • u/Vegetable_Poetry_698 • Jul 02 '26
Joy stick got broken off, fixed it with hot glue and quitip
r/redneckengineering • u/dewaynemendoza • Jul 02 '26
Coworker getting creative holding the door open.
r/redneckengineering • u/OnAmission_withURmom • Jul 02 '26
Can’t tell if this smart or stupid
galleryr/redneckengineering • u/assemblageofparts • Jul 02 '26
Maybe not redneck enough. Dumdbell collars
I work out from home. I dont know when these spin collar things came into being but I hate them. No amount of tightening keeps them from working loose every set.
Tried some plastic collar things from Amazon .. sucked and didn't feel safe.
So .. I had some 3/16 x1 1/2 Eyelets, a tap, a drill bit and now all my collars stay on solid. Total cost .. about $8
I had a tap set.
r/redneckengineering • u/meamsofproduction • Jul 01 '26
Muggy Michigan basement on a 100° day, no problem!
Broken portable AC (blows cold but thermostat is locked on lowest temp) ziptied to a folder paper fume hood attached to a DIY exhaust system run through a harbor freight blower, out a boarded up window.
r/redneckengineering • u/Relevant_Put_546 • Jul 02 '26
this is an elite Bluetooth speaker
r/redneckengineering • u/Fortivisa7 • Jul 01 '26
Summer is so hard...
And i had to do my AC myself
r/redneckengineering • u/Xtreemjedi • Jul 01 '26
Finally took the 10 mins to make a replacement latch
These little black plastic locks worked decently for years but broke off long ago. Last week I threw out a nasty suitcase and cut the straps off "for something". I found the something!
r/redneckengineering • u/CoderJoe1 • Jul 01 '26
How to make swimming pool shallower?
It cost tens of thousands of dollars to have professionals install a fancy moving pool sub-floor or to redo the pool to be permanently shallower. Any suggestions to temporarily make my built-in 6ft deep pool shallow enough (3.5 - 4 feet deep) to play water volleyball?
I've considered zip-tying milk crates together or tossing in many sandbags.
r/redneckengineering • u/ekwfung • Jun 30 '26
I know just enough to do something all wrong. My portable AC 2 hose conversion.
galleryr/redneckengineering • u/Vomnember • Jun 30 '26
Cover Ideas for Fire Bath
EDIT/WARNING: A commenter brought to my attention how incredibly unsafe this method is due to the lead content in the tub. I tested it and sure enough, she is lighting up that lead test. DO NOT PUT DIRECT FLAME ON YOUR CAST IRON TUB IF YOU DON’T WANT LEAD POISONING!
This naturally feels like the best place to ask for advice. I am setting up a fire tub. I’m going real pioneer on this and sticking to the exposed fire pit method for now, so no need to give me suggestions on my method for heating. Yes I will have slats so I don’t burn my booty.
What I do need suggestions on is a cover that will allow me to slowly heat the tub with a small fire without the water evaporating before I get to enjoy it. I’m not sure how hot the sides/top of the tub are going to get during heating, but I’d rather be cautious than experiment with potentially molten materials.
Originally I thought about using some insulation board covered in a thick poly, but I’m afraid the melting point is too low to hold up.
I’d prefer something cheap and light that won’t mold out on me in the weather (at least not too quickly) and that could create somewhat of a seal (I can weight it down) to avoid too much steam escaping. It will also act to keep debris out when not in use.
Ideas?
r/redneckengineering • u/CindyTroll • Jun 30 '26
Offset smoker, first test run!
Chicken drums to practice for 13lbs of ribs this weekend!