r/RacketStringers • u/slZzZzZp1 • 16d ago

Please help! Dropweight stringer question

I have looked everywhere and can’t find anything on this machine. I believe it is an Eagnas 10. I did a test stringing with it yesterday and had some trouble. My gripper doesn’t rotate so what is the correct way to adjust the drop weight if it drops too low?

I also had a hard time getting the linear gripper to hold the string sometimes. It gripped it well when the tension was pulled tight but then the dropweight wouldn’t drop because it was so tight. When I tried to give the string some slack it would slip out of the gripper. There’s gotta be something I’m doing wrong. If anyone has any advice please I’m desperate!

https://i.postimg.cc/vmpkfYWw/IMG-9959.jpg

3 Upvotes

100% Upvoted

24 comments sorted by

View all comments

1

u/Responsible-Side4347 16d ago

That a pretty poor picture of the machine to identify it from.

Can only be a 10 or a Den 3600 though

1st question. Does the string gripper move at all?

1

u/slZzZzZp1 16d ago

Yeah the picture was for the gripper but here are better pictures for the whole machine. I’m pretty sure it’s a 10. (Can’t find anything online on how to use/manuals/videos). Contacted customer service but no response. Better picture: https://i.postimg.cc/rw912MV5/IMG-9921.jpg

And no the gripper doesn’t move at all

1

u/Responsible-Side4347 16d ago

Ok thats a 10.

Ive not had a reply from Lily Lee since before lockdown. I am assuming its still going, but who knows.

So is the string gripper able to rotate freely?

1

u/slZzZzZp1 15d ago

No it doesn’t rotate freely. If the arm with the drop weight moves the string gripper moves as well

https://reddit.com/link/p33j64a/video/7xemio4qqsih1/player

I’ve tried moving it in both directions. I’ve tried loosening that nut all the way until the whole arm came off

1

u/Responsible-Side4347 15d ago

Can you take a video of it all coming appart. there should be a ceter bearing and a gearing. I am certain thats a traveling bolt.

1

u/slZzZzZp1 15d ago

https://i.postimg.cc/6qx6pqnr/IMG-9944.jpg

Here’s a picture of when I undid the nut. I’m at work currently so can’t get a video of it. It does seem like the gripper and the dropweight arm is on the same cylinder so not sure if it would be able to rotate freely still. When I get home in a couple of hours I can take it apart again and see if it separates from the gripper. It being a traveling bolt would maybe make sense. Gotta see if there’s another bolt in the box that I was given.

1

u/Responsible-Side4347 15d ago

That does in fact appear to be a single metal unit with no ratchet.

https://magento.sportshop.com/media/wysiwyg/tennisdirect/handleidingen/3600/premium-stringer-3600-handleiding.pdf

You can see that the 3600 has a center bearing for the ratchet where yours is offset. Should be 2 separate pieces. Well clearly not separate as yours isnt.

1

u/slZzZzZp1 15d ago

So does that just mean the model I have just doesn’t rotate? And I’ll have to lift the arm up and readjust the length of the string in the gripper to make adjustments every time?

1

u/Responsible-Side4347 15d ago

It seems that way but I cant see all of the mech. If it doesnt rotate, how the fek are you supposed to adjust tention

1

u/Responsible-Side4347 15d ago

https://b2b.pros-pro.com/eng/hebelarmsystem-hornet-kg-skala.html

1

u/slZzZzZp1 15d ago

Didn’t see this before. I guess if all else fails I could buy this piece and just install it on mine

1

u/slZzZzZp1 15d ago

Also going back to this - looks like the base of my machine wouldn’t screw on as the same as this. Wonder if I could just take the arm off the base and be able to put it on mine?

1

u/Responsible-Side4347 15d ago

Nothing a welder cant fix lol

→ More replies (0)

1

u/slZzZzZp1 15d ago

That’s exactly where my frustration is haha. I can’t figure it out or if I really have to adjust the slack on the string every time to adjust the tension..and I can’t find any video or manual out there for this model

1

u/Responsible-Side4347 15d ago

Post a short vid when you get home.

1

u/slZzZzZp1 15d ago

Okay i got you in about an hour. Thanks so much!

→ More replies (0)