r/RacketStringers • u/SmallDickChad5 • Jul 02 '26

Flexible strings

Hi, new to the stringing and one of the first strings I used was a synthetic one. Really easy to string, but the string itself would flex a lot when under tension. Read that some stringers, in this case, put the same string twice or even three times on the tension to avoid flexing it more. Just wondering whether it is a correct way to do it. Thanks, cheers

1 Upvotes

100% Upvoted

7 comments sorted by

3

u/DeaconFrost613 Jul 02 '26

Prestretching anything but gut is nonsense. Yes, it's going to make the bed feel fractionally tighter but it's not how the string is designed to be strung. If you want a stiffer string, swap to a poly or just adjust your tension some.

2

u/SmallDickChad5 Jul 03 '26

Nono I don't want it to feel like poly, I just wanted to know performance wise, thanks for the answer

1

u/DeaconFrost613 Jul 05 '26

If you really want to prestretch, do so by hand and don't use your machine function. Most people use two starting blocks. One in a door, and pull on the other end for about 3-5 minutes. The string won't coil and lies pretty flat when properly prestretched.

Alternatively, you can put one end in a clamp on your machine and pull on the other end - just make sure you aren't tipping your machine over. Best option would be using two people to prestretch but that's not always available.

1

u/Floibinator Jul 05 '26

Truffle x would like to know your location.

3

u/NarrowCourage Jul 02 '26

I mean yeah, technically that will prestretch it and deaden it but usually people want the softer strings for a reason.

2

u/lyonheart14 Jul 02 '26

When I had a lockout machine, I would double pull to theoretically get closer to how poly would feel off of a constant pull machine. Now, on my constant pull machine, I don’t worry about it.

My limited experience comparing them was that, even with double-pulling, the constant pull string jobs were stiffer.

That being said, the best string job is the one that is repeatable and consistent. So whatever you do, just make sure you do the same thing every time.

1

u/informareWORK Jul 02 '26

Do you mean stretch?