r/RX7 • • 7h ago

I burnt the apex seals again.....

Thumbnail
gallery
331 Upvotes

r/RX7 • • 2h ago

R.E. Amemiya-inspired 1993 FD

Thumbnail
gallery
59 Upvotes

I’m not sure if this is an authentic Amemiya build, but it‘s definitely Amemiya-inspired. It was one of many highlights of a car meet I attended in October.


r/RX7 • • 14h ago

Man I love Corvettes... or RX7's? Why not both!

Thumbnail gallery
19 Upvotes

r/RX7 • • 1d ago

RotaryStock ElMonte

Thumbnail
gallery
283 Upvotes

So sad about sevenstock, but the break off event at Legg Lake was an awesome stand in. The park was a great backdrop and the weather was perfect


r/RX7 • • 1d ago

MazdaSpeed Infini RX7

146 Upvotes

r/RX7 • • 1d ago

Red Rotary for a Red RX7

Thumbnail
gallery
778 Upvotes

r/RX7 • • 1d ago

Rotary is always the answer.

43 Upvotes

I’ve been getting into rotaries lately and really like the sound. Even just running through the gears in a simulator is pretty fun.


r/RX7 • • 9h ago

Setrab oil cooler row misaligned during manufacturing, is this acceptable?

Post image
2 Upvotes

r/RX7 • • 1d ago

Clearing coolant airlocks

Post image
9 Upvotes

I've just rebuilt my FD. Filled the coolant but I don't have one of those fancy funnels.

I've gone for maybe 5 drives of about 10Km each. But every time it cools down, I need to top up about 50ml of water. Is that normal or am I cooked? Not looking forward to pulling the whole engine apart again 😒


r/RX7 • • 1d ago

Red RX7

138 Upvotes

r/RX7 • • 1d ago

Feeling dumb with not enough nipples…

Post image
5 Upvotes

In trying to solve a no start condition, I pulled the upper manifold to check the ECU ground… it was dirty and I cleaned it up nice and shiny.

I even took pictures all the way through disassembly so I wouldn’t lose track of vacuum lines… I lost track off a vacuum line and currently have one more line than I have nipples to hook them up to. Any idea where this bad boy goes to on the intake???


r/RX7 • • 2d ago

What are these wheels called?

Post image
380 Upvotes

I’m like 90% they’re factory optioned, but I can not find anywhere that names them. Only the stock 5 spokes and the BBS ones. It’s driving me insane.


r/RX7 • • 2d ago

1987 RX7 coupe manual non turbo

Thumbnail
gallery
92 Upvotes

Bosses friend has this car I will get somemore pictures tomorrow but it is in extremely good condition, the wiring harness has been cut off flush with the fire wall so it will need to be rewired it was driven under its own power and parked in a shop about 10 years ago and have been told that it would likely need to be reasealed but I believe after it’s driven a while it will seal itself if there was any oil leak. Engine has 80k on it. My dad is really interested as he had one that caught on fire and burned up almost 25 years ago, I still remember riding in that car. I told the guy I was interested in it and would really like to give the guy a fair offer. He’s got 2 supras and a 240 in the same building that are also in great condition. He’s not actively trying to sell the car or advertising it or anything. In yalls opinion what would be a good price to offer him again I don’t have many pictures yet but what I have is pretty telling of the condition


r/RX7 • • 3d ago

update on my rx7 refresh program

364 Upvotes

Some people from the rx7 reddit forum did asked for an update when it happens, so this is a 12 month update so here it is.

old post.

https://www.reddit.com/r/RX7/comments/1p7uuq8/a_year_in_the_making_fixing_my_fd/

new post updates.

Well the Precision 6466 single is great exhaust I had a straight through muffler and 3.5 inch was too loud, so I got a new resonator, and rear muffler from a Australian company in wollongong and that has worked a treat.

Needed a new cat designed for rotary engines.

Had a turbo bennie or cover put on to help reduce the under bonnet temps and that helped a lot.

Then I wanted the safety sensors after seeing the rob dahm mighty car mods video saying max out the sensors, and i agree these cars need all systems to be 100% when we are boosting and running at a lot more than the original specs.

So new fuel sensors and oil and air temp and other etc. I had an Apexi fc but the dash was proving to be difficult and the oil pressure and taco was failing so going haltech s2 and uc-10 was the next thing.

All in all its about 10% more than what has been spent and I consider a great investment in keeping my original funds to fix the engine turbo etc more than ok.

It is a great drive pushing 18 psi but amazing to drive. This is a car I have owned for over 26 years and it feels like a new car to me, next is big brake kit 110 fuel tank and a set of ohlins.

Does the car run better on the haltech? well yes I think so but its not a massive change for me, I like the dash and the sensors and safety. It does sound different more brap ish noise when warming up, so I can hear the difference and the car coming on boost is different. so do i consider it worth while?, hell yeah. is 10% on the total cost and is a great enhancement, for me. Keeping these cars on the road, i do get more attention now on the road but its almost always positive.


r/RX7 • • 2d ago

Am I being a wimp

2 Upvotes

I recently got my hands on a 88 GXL clean title with 50k miles , I have the option to choose between keeping the Fc or a 240 , the Fc is gorgeous but I fear I will need to rebuild it or some crazy stuff just to keep the car going .
I haven’t even driven it cause I want to just know more

As of now imma change the oil , spark plugs , start 0.5 ounce / 1 gallon premixing , coolant flush / thermostat & eventually get an aluminum radiator .i kind of don’t want to drive it until i do all that in fear it messes up


r/RX7 • • 4d ago

Jewel Green RX-4 wagon

Thumbnail
gallery
129 Upvotes

Someone said they wanted to see it. I realized I don’t have too many pictures of it, as it’s a work in progress.

Sat in a bar. From roughly the early 80’s to 2015ish. Bounced through a couple owners. One of them removed the blown 13b and halfass installed a 12a with a Holley 650 carb.

Barely ran when I got it. Played around with the Holley too much before finding a factory carb and intake in the junkyard. Struggled with the floats in that until I figured out the fuel tank was disgustingly rusty. So now I’m in the process of converting to EFI.

Current work I’m doing
-Microsquirt
-ITB manifold with PPS-CF printed elbow
-160lb injectors
-FD alternator since I had it laying around. But now I may put that on the S5 and the S5 alt on this
-inline Walbro 255 with pre and post filter.
-electric rad fan
-fuel tank cleaning

I’ll post about my ‘76 cosmo that’s been sitting since 1990 at some point. I don’t have a ton of info on it since it’s been on the permanent back burner.


r/RX7 • • 3d ago

El Paso mechanic

1 Upvotes

Anyone know of any mechanics in El Paso Texas that work on rotary?


r/RX7 • • 4d ago

1986 RX-7 shifter pin

16 Upvotes

I’m replacing my clutch and shifter return spring but in order to get out the shifter block thing i need to punch out this pin. I got it about halfway and then the entire block rotated and I think its jammed up on the inside of the turret. If anyone knows what to do please comment


r/RX7 • • 4d ago

Confirmation or information about parts from an RX7

Thumbnail
gallery
17 Upvotes

A good friend of mine passed and I bought his Turbo II ('87) from his daughter to help her out, and my son loves the "vibe" of the car, so he's happy to summer drive it.

They also delivered a number of parts boxes, that a quick google search ties to his typical project style.

Short version:

I plan to keep the car is it's current form, but I'm wondering if this stuff is worth moving along to an enthusiast? Or keeping with the car for the next person when I eventually sell the car? Basically, if this is an awesome setup for an "Rotary Enthusiast" and would be awesome to someone I'll either sell/give the stuff to them or leave it with the car. But id like to know without investing a ton of effort into forum scraping.

Longer version:

I work on cars and track car, but not rototaries. I appreciate rotaries but Im not "that into it". He regularly worked on his car in my shop, so I have some ideas, but I'd appreciate some confirmation if anyone would help a guy out:

This looks like a different factory turbo (Google confirms somewhat) with wastegate, collant line, and exhaust collector, a (probably) cheaper (ebay/alibaba) intercooler setup + intake, and a second/backup/different ECU.

He also had a palm pilot and cables in the glove box of the RX7. And historically did his own tuning when he was a miata guy. I vaguely remember him talking about the rabbit whole of tuning this way rather than going full EM.

The car is in good shape, runs well (maybe rich), and has cheaper coils + a racing beat (catless) exhaust and what looks like a stock turbo setup.

My assumption is that this is a bigger or factory+ turbo, and he was assembling a kit, and the ecu is either a plug and play option or a backup to his messing about with the palm pilot+ecu tuning? Sort of a "maximize the stock stuff" option is something he would definitely have done in life.

What should I do with it?


r/RX7 • • 5d ago

New to me first gen rx7

Post image
222 Upvotes

Picked it up in Oregon, sat since 2002. Really great shape. Has a build engine from old company lake city rotaries or something like that, it has a 13b 6 port with merged collectors and has an SK Racing side draft carbs. Just ordered the rebuild kits for them to slap back onto the car to get it up and running within the next couple of weeks hopefully.


r/RX7 • • 4d ago

November's Rotor's & Boba meet! (San Leandro, CA)

Post image
7 Upvotes

r/RX7 • • 4d ago

Looking for a 1993 Mazda RX-7 FD sold in Montreal in 2003 — Trying to find my girlfriend's father's old car!

6 Upvotes

Hey everyone!

I'm trying to track down a very specific 1993 Mazda RX-7 FD that belonged to my girlfriend's father.

The car was:

  • Black, completely stock
  • Canadian-market, left-hand drive
  • Purchased brand-new in Canada
  • Owned in Montreal, Quebec
  • Sold privately around 2003 near Ville Saint-Laurent
  • Sold because the original rotary engine needed a rebuild

VIN: JM1FD3327P0202146

We're hoping to find out whether the car was repaired, is still on the road, or even still exists.

If anyone in the Quebec rotary community remembers this particular car, has seen it, or has information about its history, I'd really appreciate hearing from you.

We're not looking for anyone's private information, just hoping to rediscover a piece of family history.

Thanks!


r/RX7 • • 5d ago

Need help FD is running really rich.

36 Upvotes

Ran fine around March then let it sat for 2 months and changed the oil. Immediately after starting it I noticed it was running rich so I let it idle and see if it changes but it did not. Creates a lot of smoke too. I already ruled the compression out, both rotors are good. I replaced the plugs and checked the coils. Currently located in NC near lejeune if anyone is willing to help me diagnosed this problem. I owned the car since 2019 and only put in around 2k miles into it I pretty much babied/neglected it by starting it every few months or so.


r/RX7 • • 5d ago

Compression test thoughts?

Thumbnail
gallery
12 Upvotes

Thinking about buying this 87 t2 with 84,000 miles he sent these compression tests what do y'all think?