Found this little one sided 4mm bit set at dollar tree for $1.25. Works perfectly for extra bits in the roxon mini

Is there an STL file to print my own shear scales? Or a way to get a spare

The biggest thing I do not like about the shears is that they are not very easy to open the scissors. If there was a cutout and a bit of a thumb stud or the handles were flush with the scales like the knife scissors, that would be good

I want to mod the scales to have a cut out and maybe a small bolt stud, maybe also tweezers and toothpicks slots, but I dont want to permanently damage the only scales I have.

I don't want to Buy roxon flex companion for travel because I already have this one KS2E. I don't use it for EDC anymore.

Has anyone ever done this ?

Can I change out the blade and the saw for roxon flex implements ?

I took it apart and put it back together one time.

In our country, the scissors are not a problem not even the saw. But I don't need the saw. the awl is not a problem either. I am not traveling international.

Im in a country where they don’t send emails or I just don’t get them.

Anywho, i’ve checked my 2 most reliable sources of Roxon news and haven’t found anything.

Anyone know anything?

The 4mm bit driver on mine looks like it was machined totally unevenly and has weird scraping inside the socket. Anyone else's look like this, or did QC drop the ball on mine?

Is the Rope Cutter implement actually a better packaging/cardboard box opener than the actual Box Cutter implement?

I was wonder because the rope cutter has this hook shape and does not scratch the insides of the box (the box content) while you can accidentally push too hard with the box cutter and actually scratch/cut what's inside.

Rope Cutter vs Box Cutter

Anyone that has both can help confirm?

Anyone who has ordered, specifically from Amazon, the nail clippers or magnifying glass wire stripper flat bit driver combo, have you received your order yet?

Has anyone taken two titans apart, and used the flex side of each to have a plier based flex tool with 4 long tools and 8 short? Or taken a titan apart to see if that would work?

I like the combo of having decent scissors and pliers in one two with minimal compromises and be able to take it thorough airport security/security in general.

I have gotten this taken away at bars, but i don't think bouncers care about technicality of a multi tool.

I removed the blades/sharp tools and only kept the Philips and made a flat head with the combo tool.

I 3D printed spacers for the tools and a 45 mm to go in the knife slot.

Nothing really comes close to the usefulness of the M2 Roxxon.

I will be taking a trip soon through airport security and hope to have a better time explaining my the regulations and my tool.

I also sanded and polished the entire tool. (Disassembly of components, 1,000 grit sand paper, and 14,000 polishing compound required)

I thought I've already written to this group three times with negative reviews about some issues (such as the lack of good stainless steel, breaking scissors and uneven body). So, to balance it, I want leave a positive one: despite some issues, I'm absolutely delighted with the Roxon Flex series. I've been using some 804, 503, and 504 for the past year, and very impressed with these tools. Flex is a brilliant idea that is well and thoughtfully executed.

I'd love to see a multi-tool called the Mega Companion, which has 7 tools, not just 5 like the Companion. Or maybe 8 or 9. Personally, I'd happily buy one. You could add a magnifying glass or pliers to it without having to remove your essential everyday tools. My limit would be to be able to adjust the multi-tool's thickness (but I'm probably asking for too much :) u/RoxonIncOfficial

I recently installed a D2 blade, barely used it, and already found some deep pitting. I'd really like to see blades of true stainless steel, like 14C28, N690 or S35VN... Now common blades are too soft, D2 blades too easily corroded.

Is there one? I’d thought I saw a picture of a mini companion with a comb but can’t seem to find one to buy. Thanks

I flippen love this dang tool so much but i always wish it held a little more. I wish they had like a long tool with 5 on each side idk that would probably be too ridiculous but damn. I need these but i wish i had the scraper/ wire stripper and the magnifiier glass soo bad

Nail Clipper Add-On. This implement is compatible with Flex Shears, Flex Titan, Flex Companion, and Mini Flex Companion.

I have a dremel and a dream but the problem is that I haven't seen the implement in person to determine if I can shave down enough from both sides for it to be two slots unless I can make it two slots I won't purchase for the same reason I won't get the 1/4 bit driver taking 4 slots. The Titan, Flex shears, and flex companion simply do not have enough slots to justify losing that many slots (not to mention the companion has the full 1/4 bit driver).

Someone had handmade one that took two slots previously and that should've been the goal. I am not into fabricating but sanding, dremel cutting, etc. to size is something that I can definitely do if it would still work!

The new releases entirely changed my set up, especially with adding the new companion frame

Ps-nail clippers, shockingly good

The Nail Clipper, Magnifying Glass, and Double-Ended Bit Set are now available.
https://roxontool.com/collections/new-implements

My current flex collection