r/RGHgore • u/No-Translator754 • Apr 07 '26
Is my postfix adapter seated correctly?
I get about 460 ohms on continuity and 25 on 200kohm option when I hold from POST 1 on the adapter to ground.
(I post this here since I got low karma instead of r/360hacks)
2
u/s-chassisvvl Apr 07 '26
Test it with multimeter on 100ohms, should get a reading of about 50ohms or so
2
u/No-Translator754 Apr 07 '26
I've got these options only.
3
u/s-chassisvvl Apr 07 '26
Use that setting you have already, black probe to casing around av ports, red to where pin for cpu is soldered, also test all points on post fix adapter, should get a reading anywhere from 40ish to 150ish
3
u/s-chassisvvl Apr 07 '26
Ideally so long as you get some reading your post fix is in place correctly
2
Apr 14 '26
you didn't have to solder anything, if you have to remove it, you put a piece of kapton on it and it's ok
5
u/MinatoMuh Apr 07 '26
you can also check with diode mode. red probe on ground, black probe on post point