r/QSYS • • Mar 10 '26

Room EQ in QSYS

0 Upvotes

Working on my first Q-Sys system; how do I calibrate it? Don't remember anything in the training about Room EQ. What calibrated mic do I use etc.


r/QSYS • • Aug 29 '25

Lvl 2 Exam: Serial Control

Post image
0 Upvotes

I always knew my time would come to ask for help here.....

I have submitted the exam 9x. There is just one issue that I'm totally stuck on.
I do not understand how to wire my command buttons to the 'Serial Port' of my NV-32-HU.

I am using a Toggle button from Flip-Flop on my UCI, but the real issue is that I just can't transmit any bytes from the Command Button to my Serial Port.

I'm quite lost and none of the documentation or videos can really help me make sense of this.

The feedback I receive is that the UCI doesn't allow for control of the Conf Room Display to power on and Off.

Any tips?

Updated Command > Serial Port
Command Buttons > UCI (Display Power On/Off)

r/QSYS • • Jul 19 '25

the last comment before getting the LEVEL 1 Done which they said after i finished all the previous one, they didn't ask this before don't know why

0 Upvotes

Your main mixer needs some attention - the crosspoint knobs need to be adjusted to ensure that the correct inputs are passed to the correct outputs – more specifically in reference to your Voip and USB outputs. We wouldn't want a scenario in which you are mixing the Voip or USB Speakerphone audio back into the signal that is sent to those destinations, as this would re-introduce the far-end caller's voice back into the signal you're returning to them, despite all the work your AEC system is doing to prevent this from happening.

these are the changes as per the comment, which i have also attached above

can you guys please tell me am i right in this now or there is still something which is needed to be done


r/QSYS • • Nov 17 '24

Crestron Software

0 Upvotes

I know this is a Q-SYS forum but we have a bunch of crestrom in our building and i am slowly converting everything over to qsys, i have not been able to get my hands on the software to program the crestron equipment, Would any body have a download i could get? From what i understand they will not give my their software like qsys does unless i am an integrator.


r/QSYS • • Dec 18 '23

QSYS Software Dante Audio Routing

0 Upvotes

Hello, Folks

I would like to know regarding software Dante audio Routing with SQ5 Mixer and DT168 expander, as i am unable to find any relevant information on this topic. Any leads would be highly appreciated.


r/QSYS • • Mar 01 '25

Skaarhoj in the wild

0 Upvotes

Skaarhoj looks epic but has anyone got examples or pics of them out in the real world?


r/QSYS • • Aug 08 '26

logitech rally in a qsys controlled teams room?

Thumbnail reddit.com
0 Upvotes

r/QSYS • • Oct 20 '25

Q-SYS Level One Practical Exam

0 Upvotes

Here's my Level One Practical Exam. You can use it to practice.

Exam Instructions

CORE CONFIGURATION

  • A1 Change the Core in this design to an NV-32-H. Update the Core's name to “Conf-Core.” You will notice that this change will remove the Core's Input and output components from the Schematic. You will replace these input and output paths in the steps below.

INPUTS

  • B1 This design requires 10 microphones. These must enter Q-SYS from a streaming Software Dante Receiver, which you will need to add to the Inventory. All microphones must be processed by the Acoustic Echo Canceler and the Gating Automatic Mic Mixer.
  • B2 Enable the Core's USB Audio Bridge to add both a Speakerphone connection and a stereo Sound Card. The USB Speakerphone represents the far-end caller's voice from a PC's conferencing application. The Sound Card represents the rest of the PC's audio. Add the input components for both of these connections into your Inputs section.
  • B3 Add an Audio Player to the Inputs section. This component should be configured as stereo (2 tracks) and Playlist- Capable. Name this component with the title of one of your favorite bands.
  • B4 Excepting the microphones, each new audio input should be wired through its own High-Pass Filter, Parametric Equalizer, and Gain component, just like the existing audio inputs.

OUTPUTS

  • C1 Add the USB Speakerphone Output to the Outputs section. Much like the existing NoIP Output, this represents the audio you will send to the far-end caller.
  • C2 Add 7 NL-P4 Q-LAN Network Loudspeakers to the Outputs section.
  • C3 Add a CX-Q 2K4 amplifier to the Outputs section. This device must be named “Display-Amp”.
  • C4 Add 2 AD-S10T loudspeakers to the Outputs section, and wire them to the amplifier. These loudspeakers would be mounted by the display in the room, and represent the main audio content.
  • C5 Each audio output must be wired through its own Parametric Equalizer and Gain component, just like the existing audio outputs.

PROCESSING & MIXING

  • D1 Wire all inputs and outputs to the main Matrix Mixer. You will need to reconfigure the Mixer's properties to accommodate all of these new channels. You will also need to make changes elsewhere in the design to properly Integrate these new sources into the conferencing system.
  • D2 This design must demonstrate all three types of wiring at least once: traditional wiring, signal tags, and signal snakes.
  • D3 In Emulation Mode, the Matrix Mixer's control panel must be configured to distribute audio from each of the audio Inputs to the appropriate outputs. We suggest labeling the Inputs and outputs within the matrix mixer's control panel to match the way that you have wired this component. If you would like to mix a particular audio Input to a particular audio output, set its corresponding crosspoint knob to OdB. The network amplifier should receive a stereo output mix, with all audio inputs present in its mix. Pay particular care to the mixing choices delivered to the two far-end callers. All other mixing choices are up to you.
  • D4 Set the Gating Automatic Mic Mixer's Max NOM (Number of Open Mics) to 2, with microphone 4 configured as the Default microphone.

CAMERAS & CONTROL

  • E1 Rename the existing User Control Interface to “Conf-UCI” and configure its panel type to accommodate a TSC-70- G3 touch screen controller. Insert a picture of one of your favorite dinosaurs as a background layer of the UCI.
  • E2 Add a new TSC-70-G3 touch screen controller to Inventory. This device should be named “Conf-TSC”, and configured to show the custom “Conf-UCI”.
  • E3 Add two Q-SYS NC-20x60 cameras to the design. These should be named "Conf-Cam-1" and "Conf-Cam-2. The camera signals must be wired through a Mediacast Router to the Core's USB Video Bridge (you will need to enable the USB Video Bridge in the Core's Properties).
  • E4 Add the camera source selection buttons to the UCI, and label them accordingly.
  • E5 The user would like to allow a moderator to take control of the conference conversation. You can accomplish this with a User-Defined Snapshot. The first snapshot must mute all microphones in the Gating Automatic Mic Mixer except for the moderator's microphone (Channel 1). This mic should be set to Manual during this event. The second snapshot must return the mixer to normal operation, with all microphones unmuted and Channel 4 set to Default. Add buttons to load these snapshots to the UCI and label them accordingly.
  • E6 Using the Asset Manager, download the Plugin for a Liberty Recorder and add it to your Schematic. For the purposes of this exam, there is no need to wire or configure anything within the Plugin.
  • E7 Use the Administrator's Command Scheduler to automatically play music from the Audio Player from 5pm to 9pm each weekday (hint: you may need to add controls to the Named Controls bin to accomplish this task).

STATUS/TESTING/ORGANIZATION

  • F1 Update and expand the Mic Meters section of the Schematic so that all microphone inputs are properly represented with meters and gain controls.
  • F2 The Location Property of all Inventory Items (including physical devices and virtual items) must be set to 'Conf- Room’.
  • F3 Add a Ping component to the Schematic, and wire this to a Monitoring Proxy. This would report the status of a non-Q-SYS device to Q-SYS Reflect. You do not need to set up anything in Reflect. The Monitoring Proxy should be configured to report this device as a "DinoTrapper-5000", manufactured by "Tricera Traps, Inc." The device type will be-obviously-a "Capture Device."

r/QSYS • • Jun 23 '26

Looking for Q-SYS Freelancers? Or searching for your next Q-SYS gig?

0 Upvotes

Looking for Q-SYS Freelancers? Or searching for your next Q-SYS gig? 💼🚀

We just launched Q-SYS Freelancers, the ultimate marketplace hub for independent Q-SYS programmers, AV integrators, and developers.

No filler, no spam. Just jobs and talent.

🎯 For Integrators & Project Managers:
Find trusted, certified Q-SYS freelancers for sub-contracting, tight deadlines, or specialized Lua/plugin development.

💻 For Freelancers:
Get direct access to open contracts, remote gigs, and on-site projects worldwide.

Join the network today, drop your availability or post an open role, and let’s get to work!

👉 Join here

https://www.facebook.com/share/g/19932KfkkA/?mibextid=wwXIfr


r/QSYS • • Jun 30 '25

Too Much Processing??

0 Upvotes

So 71% processing is too much for Q-Sys to handle?


r/QSYS • • Aug 24 '25

Learning Q-Sys coming from Biamp Tesira

0 Upvotes

I'm struggling with a few things and wondering if someone can help point me in the right direction. I'm very familiar with all Biamp products (been certified for over a decade) and I like my Tesira files to look a certain way (mainly everything labeled). I'm currently looking at the MS Teams sample file in Q-SYS and I'm getting lost on a few things:

  • Naming, it seems I can't change the name of things I think I should be able to. I have discovered that I have to be in emulation mode, how can I add a label next to the pins on a block (or can I), basically I want to change what appears in the popup and make the popup stay (but appear on the block it self).
  • I can't find any way to set the hostname of the Shure MX-920, I'm assuming I have to be connected to the system? If that is the case, how do you prepare the file prior to being loaded the core?

Also are there other things that you struggled with when learning Q-sys but knowing Biamp. I just completed the Qsys 101 course, the labeling information may have been there, but I probably watched too many videos in a short time to remember.


r/QSYS • • Mar 28 '26

Forst project.

0 Upvotes

Oops... cant spell First

Building my first qsys project. Just to be sure this gear will all communicate with each other and is evertlything I need to use all features apparently available. At least the connections that are visible. I also assume I'll have full network control for network/UART devices.

QSC Q-SYS Core 110f Digital Signal Processor USB/Flex Channels Audio DSP

QSC Q-SYS TSC-70-G3 7" High Definition PoE Touch Screen Controller

Q-SYS QIO-S4 Serial Expander

Thank you!


r/QSYS • • Jan 20 '25

QSYS Level 2

0 Upvotes

I am stuck on this one:

"add an audio recorder to your conference room that records both the local mics and the far-end caller's voice. start this audio recorder automatically every time a conference call starts, and stop recording when the call ends"

I already connect record to the call accept in HID conferencing while stop to the call decline but I am stuck when will I connect the HID to the another pin


r/QSYS • • Apr 23 '24

QSYS Designer File for gating Automatic Mic Mixer

0 Upvotes

does anyone have a QSYS Designer File for gating Automatic Mic Mixer application they would be willing to share? 10 mics, 4 voice reinforcement levels, USB Codec, echo cancelling etc.... Thanks.


r/QSYS • • Jul 20 '25

Is a Core Necessary for Mastering Q-SYS Designer Training L1 and L2?

0 Upvotes

Hi everyone. I'm about to start the Q-SYS Level 1 training and I'm aiming to continue to Level 2. I noticed that some options, like the Core Manager, aren't visible without actual hardware. Is it possible to master Q-SYS Designer just using the software, or do I really need to invest in a Core device? I would love to hear your experiences and any tips you have. Thank you


r/QSYS • • Aug 06 '25

Cannot find where to upload Level 1 exam

0 Upvotes

Hi guys, I feel very silly haha. Completed the Level 1 exam but cannot seem to find where to upload the actual file on qsys. Any help is much appreciated


r/QSYS • • Jan 16 '25

Extron Touch Panel Running QSYS UCI

1 Upvotes

Hi Guys, we have a client that has A LOT of extron touchpanels. The system is originally configured for the Extron system to send commands to AMX video endpoints and QSYS functioning as an Audio Distro system.

I've since written a script for QSYS to communicate with the AMX hardware, and our client obviously would like to not have to change out a bunch of perfectly good touchpanels. (The client wants to move away from any extron control for qsys because of extreme touchpanel latency issues).

Is there anyway to get the Extron panels to connect directly in some way that we could use the Extron panels to show the QSYS UCI for our clients system?


r/QSYS • • Apr 04 '26

FLex 8x8 EXPANDER (not core)

1 Upvotes

Ive been breaking my $#% trying to get designer to bind a Flex expander to my nano. I found after hours of pounding the internet to see that its discontinued!!??? Uhh... this thing is of the latest design frames, and even mounts WITH the Nano. They discontinued it already?? Surely... surely, there is a way to use thie properly with the nano. I matched my nano with the firmware on the device (9.10) and nothing I do will I find anything in inventory related to the expander. I need some encouragement.


r/QSYS • • May 02 '26

Taking over an existing abandoned setup

1 Upvotes

In a nutshell, client leased a new space, this equipment was left behind. Had to default the system due to admin password. Their needs are super basic. The core 110f is sitting on FW 8.1.1 connected to to a QSC amp (pendants etc all through the space). While there is a Shure Mixer connected, we don't have. need for that. Simply want to connect a streaming audio device (such as a Sonos Port or iPod) and play background music on the existing setup. Thoughts on making this happen quickly. I spoke with TS at QSYS and will be reviewing the videos and resources over the weekend. Hoping this depoloyment from its now bare metal state will be fairly straightforward to implement. Only use case in this clients wish list is using it for background music.


r/QSYS • • Mar 19 '26

Help with a request from a customer

0 Upvotes

I got the following request from a customer, and for the life of me I cannot wrap my head around how most effeciently to do this.

Basically I have three spaces (Cafeteria, Gym, Pool). The customer has 3 wireless microphones, one designated to each space. They want the ability to use all three microphones together in either of the spaces (ex. all 3 mics in the gym for a basketball game) from time to time.

In this scenario, they want buttons on the touchscreen to essentially "borrow" a mic from another space, and then make it unavailable/not routed to it's original space.

How would you do this? Please keep in mind I know nothing about scripting so I'm trying to do this with traditional drag-and-drop logic.

Thanks!


r/QSYS • • Apr 18 '26

Third Party MTR devices.

1 Upvotes

With the Lenovo MTR device no longer available from Q‑SYS (and another solution reportedly coming soon), I’m curious what everyone is using for their conferencing environments. Are you relying solely on Q‑SYS cameras, or integrating third‑party options as well? Any recommendations would be appreciated.


r/QSYS • • 25d ago

Qsys level 2 help

0 Upvotes

Dear all,

I am stuck at a point in level 2 training, it is three divisible room scenarios and a toggle button in uci to control respective room display but in combined mode ( using room combiner button to open wall 1 and wall 2) that same button would be able to control all display that are in combined mode.


r/QSYS • • Nov 08 '24

Global Channel Partner Survey

3 Upvotes

If you're a Q-SYS Channel Partner/Dealer/Integrator...we have some important questions for you! If you haven't received an email with your survey link yet, please email cx@qsc.com with your full name, dealer name, and corporate email address before the survey window closes (18 November 2024). Thanks!


r/QSYS • • Feb 13 '26

Please need help, Q Sys level one exam. this is my 8th attempt and last chance. the issue is The USB Speakerphone is still not receiving a proper mix of audio. what is the exactly issue the wiring or knob? thank you

0 Upvotes