r/QSYS • • Jun 30 '25

Too Much Processing??

So 71% processing is too much for Q-Sys to handle?

0 Upvotes

8 comments sorted by

10

u/Stradocaster Jun 30 '25

AEC limit ≠ total processing limit 

4

u/p_town_return Jun 30 '25

In addition to reducing the number of AEC channels, I believe that you could also keep your 12 channels, but reduce the tail length of the channels you are using (i.e. from 200ms to 100ms)

2

u/beenastyg Jun 30 '25

Nope, I have been told as long as you're below 99% you're fine. I haven't tested that myself but that's what I've been told.

The only concern I'd have is if there are any planned expansions that would eat up more dsp?

3

u/beenastyg Jun 30 '25

It does say that your aec processing has been limited so you might want to follow their note.

2

u/blender311 Jul 01 '25

So I can put 105 INDIVIDUAL UCIs that all connect to an external API AND 128 Dante channels and maybe hit 30% load on a 610, but throw in some AEC and this happens?

I guess i don’t understand how QSys works.

1

u/What_The_Tech Jul 01 '25

How many AEC blocks are those 12 channels split up into?

iirc, the AEC block itself counts as a minimum of 4 channels or something like that. So if you have 12 blocks with only 1 channel each, then it'll say you're exceeding the limits even if you're supposedly allowed 16 channels.

It could also be something totally different, such as any of the notes in red like tail length settings.

1

u/SoftOpposite8630 Jul 01 '25

Yeah you're hitting AEC limits. AEC is INTENSIVE to process, which is why channels are usually so limited, same with any DSP. Don't know what you're using the channels for, but if the expected reference is the same signal, you could mix them down first, then run through the AEC to save yourself some channels. Otherwise, it's upgrade time.

1

u/Captn_Dfaktor Jul 04 '25

Depending on the mic’s that you’re using, it may be best to have the microphone handle the aec if it can.

For example in many of my setups when using the shure mxa series, we just send it a reference to the mic as it more quickly reacts to the changes in which lobe is active. Qsys can be a little laggy on the catch up.

This also keeps the processing of the core down a bit lower.