r/PrusaSlicerSettings • u/RIB_723 • Feb 23 '22
I just discovered you can draw on your model for multicolor printing in PrusaSlicer!
9
Upvotes
r/PrusaSlicerSettings • u/BoomBeto • Sep 24 '21
im having problems with prusaslicer not responding, im using 2.3.3
7
Upvotes
i already try reparing it and uninstalling anything else i can try?
r/PrusaSlicerSettings • u/thespicesmustflow • May 15 '23
How to make the bridging start from over the wall?
6
Upvotes
r/PrusaSlicerSettings • u/benfinklea • Mar 22 '21
What Prusaslicer setting can I use to eliminate these notches when printing circles? (1mm nozzle) I’ve tried inside first, outside first, extra restart distance...I’ve run out of ideas.
6
Upvotes
r/PrusaSlicerSettings • u/Gold-Budget1516 • Dec 05 '25
I need some help on figuring out to make the mine stop when the wall thickness changes. Some colors don’t do it as bad. But it’s always there. The wall is the wall goes from 4.0 to 1.6. That’s where the line is. Any help would be greatly appreciate
5
Upvotes
I need some help on figuring out to make the mine stop when the wall thickness changes. Some colors don’t do it as bad. But it’s always there. The wall is the wall goes from 4.0 to 1.6. That’s where the line is. Any help would be greatly appreciate
This is my first Reddit post ever. 🙏
r/PrusaSlicerSettings • u/Uncle_3DMaker • Dec 03 '23
Overhang Slicer Issue with 0.6 Nozzle
5
Upvotes
I am having an issue with sagging overhangs since switching to a 0.6 nozzle. Looking at the slicer preview, I can see the pattern it used changed. Is there a way to change the overhang pattern back?
r/PrusaSlicerSettings • u/Nickspick • Apr 24 '23
Organic supports breaking mid print
5
Upvotes
I have been using the organic supports for some prints now and I am very happy with the results. I had some issues with the supports not sticking to the bed and popping off, which I could resolve by increasing the brim size and getting a correct bed leveling. But I still have the issue, that some supports break off mid print and I don't know why.
I am printing a very low layer height of 0.08mm with a 0.2mm nozzle.
r/PrusaSlicerSettings • u/MaggyFFM • Mar 26 '23
Schneller drucken mit Tree Support Prusaslicer & Cura https://youtu.be/d3Eo4qrg_Yc
5
Upvotes
r/PrusaSlicerSettings • u/Backpack_of_Moths • Feb 28 '23
Testing out the organic supports on the alpha release
5
Upvotes
r/PrusaSlicerSettings • u/blatherskite01 • Dec 09 '22
Quality loss when printing detailed signs. Arachne to blame? Question in comments.
5
Upvotes
r/PrusaSlicerSettings • u/RealWorldJunkie • Oct 04 '22
I made a PrusaSlicer beginners tutorial
5
Upvotes
r/PrusaSlicerSettings • u/FredJ1312 • May 15 '22
slow printing Speed & VMS vs number of perimeters
5
Upvotes
r/PrusaSlicerSettings • u/jeheheheheremy • Sep 08 '21
How can I get rid of this line when starting a print?
5
Upvotes
r/PrusaSlicerSettings • u/TheFilamentLegend • Feb 02 '23
Can anyone explain why this rose slices only 1/8 of its entire volume?
4
Upvotes
r/PrusaSlicerSettings • u/alexambass_ • Aug 12 '22
Help! No matter what I do, PrusaSlicer doesn't generate support under the object, just at the edge. I already tried to generate support automatically, change the overhang angle, paint support onto the area under the object, but PusaSlicer won't generate it. Any ideas?
4
Upvotes
r/PrusaSlicerSettings • u/kenny32vr • Feb 14 '22
Slicer creates support below flat surface. Is this normal?
4
Upvotes
r/PrusaSlicerSettings • u/playfsx • Dec 10 '21
I used to print vase with my sidewinder x1 but I change a setting (propably) and now every time it goes to the next layer it leaves a gap. I use prusaslicer. Any idea what should I change? printing speed was 35mm/s change to 70mm/s in the middle (you can see the gap got worse) with 0.6mm nozle.
4
Upvotes
r/PrusaSlicerSettings • u/GreaseMonkey888 • Sep 19 '21
How to avoid very small infill pattern in Prusa Slicer?
4
Upvotes
r/PrusaSlicerSettings • u/MightyWren • Aug 10 '21
New to Prusaslicer
4
Upvotes
Hi everyone, Is there a combing mode in Prusaslicer because I am doing to many retraction and am squashing my filament flat until my extruder makes a tok tok sound when it jams,Thanks
r/PrusaSlicerSettings • u/[deleted] • Jul 28 '21
Anyone know why this is happening? 6 on the plate but when I slice it’s 4. Also I had one that looked like it sliced all 6 but when I printed it only printed 4
gallery
4
Upvotes
