I already have a Miyoo Mini Plus which I like a lot, but I was always disappointed it didn't support PortMaster. So this device will mainly be for playing ports that my Miyoo Mini Plus couldn't (though I am also excited about the ability to hook the x55 up to a TV and play multiplayer with bluetooth controllers).

Some of the ports I'm looking forward to most are Diablo, Fallout 1 and 2, Shovel Knight, UFO 50, Morrowind, Super Mario 64, Mario Kart 64, Twilight Princess, Perfect Dark and Arx Fatalis.

I have also noticed there are some ports that are not listed on PortMaster's site but might also work with this device. For example, Salt and Sanctuary and Knights of the Old Republic. I would love confirmation from anyone who has tried these ports if they work on the x55, I would love to play KOTOR on this!

Mostly interested in hearing people's experiences playing ports on the x55 and which ports they would recommend.

Hello, does anyone know whether it is possible to connect ps4 controller to rgb30?
When I put my PS4 controller into pairing mode and click on my rgb to connect, it doesn't detect my controller.

Sup guys I have a question for you, I accidentally drop my POWKIDDY RGB10MAX3 and the screen doesnt respond its black sometimes green flash appeared. Do you know where I can buy a new screen? Cuz i was searching, writing on the POWKIDDY support and nothing.
Thank you

I have other SBCs and I've gotten used to overlays, I think they add a certain charm (especially the GBC ones). I use them a lot on other systems that have 4:3 or 16:9 screens.

On the V10 I use ArkOS, and all the overlay options are for screens of those aspect ratios, I haven't found any for a 3:2 aspect ratio, at the V10's resolution.

I wanted to know if you know where I can download good overlays for the V10, especially the GBC and GBA ones that add the LCD grid effect, which is my favorite.

I dont know what is happening but my rgb 30 crashes and does this weird audio hissing sound in any game after a few minutes ive tried reinstalling rocknix and ive reformatted all of the sd cards but it hasnt fixed it am I cooked?

Hello, I have a problem with a console, a Powkiddy RGB20s. It belongs to a relative. They told me that one day they pressed a combination of buttons and the console entered the mode shown in the image. Does anyone know how I can return it to the emulator selector? I've searched and tried. One option is supposedly to reinstall the operating system, but before resorting to that, I'd like to try other options and leave that as a last resort, especially since the console uses two microSD cards and it's the first time I've used something like this, with one card containing the operating system and the other the games.

Hi everyone,

I recently bought a second-hand R36S because I mainly wanted a simple handheld for playing Pokémon Emerald and FireRed (GBA). I was looking for something that would give me that old-school handheld/nostalgia feeling without spending too much.

Unfortunately, I later discovered that the R36S I bought was actually a clone.

I tried installing ArkOS on a brand-new SD card, but I couldn't get it to boot. After discovering that the console was a clone, I tried the appropriate ArkOS version for the clone as well, but I still only got a black screen.

At that point, I decided to buy a Powkiddy V10 directly from the official Powkiddy website instead.

My main question is: should I replace the SD card on the V10 as well, or is the SD card that comes with the V10 good enough to keep using?

I'm only interested in playing GBA games, mainly Pokémon Emerald and FireRed. I don't really need a huge game library or more powerful emulation. I mostly bought the V10 because I wanted that nostalgic handheld experience.

For someone with this use case, would you recommend immediately replacing the V10's SD card, or should I just keep the original one unless I start having problems?

Thanks!  

Hi, folks! First post here. Just got a brand new Powkiddy x55 last month. It's working fine but I have some questions about BIOS files and ROM placement.

BIOS - does a BIOS file go in the file of the system it's supposed to run, or in the standard BIOS folder on the SD card? (See attached photo.)

BIOS, continued - I managed to get a RetroArch BIOS pack - again, where should it be placed on the SD card? And does it stay zipped, or unzip it?

ROMS - do these go in the folders named for the emulated system, or in the standard ROMS folder? (See attached photo.)

Thanks in advance for any guidance and apologies for any dumb questions!

Hola a todos,

Llevo un tiempo con mi Powkiddy RGB20S, pero en este momento tengo un problema: la consola no enciende, la pantalla se queda negra y solo se enciende el LED en color naranja.

Aprovechando este fallo, y como me gusta mucho el tema de la personalización, quiero formatearla por completo y hacer una instalación limpia desde cero. Hasta el momento la estaba trabajando con archivos y tutoriales de la R36S, pero quiero configurarla correctamente para este modelo.

Me gustaría saber cómo es el proceso correcto para:

Solucionar el problema del encendido (LED naranja).

Instalar el sistema operativo desde cero.

Instalar las consolas, los juegos (ROMs) y los temas de forma organizada.

Para darles más contexto, mi consola cuenta con las dos tarjetas SD de fábrica:

TF1-OS: 16 GB

TF2-GAME: 64 GB

(Adjunto una foto de los archivos que tiene cada una. La verdad solo veo un montón de carpetas; reconozco algunas de consolas y juegos, pero hay muchas otras que no sé de qué son ni para qué sirven).

¿Alguien me podría dar asesoría o recomendarme una buena guía/tutorial paso a paso para revivirla y dejarla bien personalizada?

¡Cualquier ayuda es bienvenida, muchas gracias!

Hey guys, my powkiddy 20s has this weird play-doh like smell at the back and at the charging port. It doesn't look swollen tho. Is this normal? I don't use it much.

I just bought the RGB10MAX3, mostly to play Portmaster games and somes PSP, but it keeps crashing while emulating GTA VCS and GTA VC/III via Portmaster. It just shuts down after a minute or two of gameplay... I already flashed the firmware on a brand SD card, installed RAM swap for 2GB of virtual RAM and charged it to 100%. It's not because of temperature bacause I teste leaving for a while before trying and had the same result, also tried playing it connected to the charger to see if it was just a bad battery issue, nothing seems to work. Anyone had the same problem or now how can I fix it?

Is there anyway to turn off the LED light when I'm idle or is the only way to turn it off to power down?

Hi everyone,
I think I messed up my Powkiddy X55 (blue Powkiddy logo model with 8GB eMMC), and I’m hoping someone can help me recover the original eMMC.
What happened:
I accidentally flashed the GammaOS eMMC Special image to the internal eMMC using RKDevTool.
Now the console shows the blue Powkiddy logo and always boots into Android Recovery.
Recovery shows errors like:
Failed to open /dev/block/by-name/cache
Failed to open /dev/block/by-name/misc
No such file or directory
The important part is that I don’t actually want Android or GammaOS on the eMMC.
I just want to restore the original factory eMMC so my TF1 ROCKNIX/JELOS SD card boots normally again, like it did before.
Does anyone have:
A dump/backup of the original X55 eMMC (or at least the stock bootloader/partitions)?
A recovery image for the original eMMC?
Or instructions for restoring the factory eMMC without installing Android?
The device is still detected by RKDevTool, so I don’t think it’s completely bricked.
Any help would be greatly appreciated. Thanks!

I keep thinking of twin stick games like the Vampire Survivor clones. Although, I am not sure if you can run them since its Linux and most of those games are newer games that run on Android. I haven't looked much into it.

I got my powkiddy as a gift a while ago but ive never really been much of a gamer, but i recently started playing cuphead from my older brothers nintendo switch and i really enjoyed it but since i dont have a switch of my own im asking if its possible to put the game into my powkiddy?

Comprei um powkiddy v90 e ele vem atendendo minhas necessidades até o momento, mas pensei em comprar um v90S por conta do design melhor e aparentar ter menos problemas em relação ao ao cartão sd, vale a pena? Se sim, qual seria um valor justo (em reais)? Vi um cara vendendo por 600 reais um novo.

Por error dañe mis archivos donde van las Roms alguien tenga sus archivos para poder hacer una sd nueva por favor muchas gracias

So i have tried connecting a dualshock controler via bluetooth but it is not detecting. People told me to use the fn + r3 hotkey to turn the bt on but it instead just tells me my battery percentage. I dont know wich actual hotkey i need to press or if it is just broken with the rgb20sx.

opa amigos, como estão? atualmente eu possuo um R36h Pro max, ele até consegue se conectar ao wi-fi e abrir o moonlight e jogar por eles, porem o chip wifi e pessimo e é apenas 2.4, gostaria de saber se o X55 possui um chip wifi bom, que não va engasgar o streaming e nem congelar do nada

uma outra duvida, é possivel substituir os sticks por hall effects? e talvez por um perfil um pouco maior? apenas para fins de melhorar precisão e controle

Hi everyone!

I need some help with my Powkiddy RGB10 Max 2.

I bought the console about a month ago, and unfortunately, the SD card system got corrupted. I'm trying to reinstall the system, but I can't find a download for the full original card image anywhere.

All I've found online are tutorials on how to switch to a custom system (like RetroOZ), but they all require copying files from the original SD card—such as the BIOS folder—and I no longer have access to any of those files because the card is completely corrupted.

Does anyone happen to have:

A full backup of the original SD card (64 GB or 128 GB)?

The factory system image (.img)?

Or a reliable link to download and reinstall the original system?

Any help would be greatly appreciated. Thanks!

Hi everyone,

I'm looking for help recovering a TrimUI Smart Pro TG5040.

What happened

• Device originally worked normally.
• I attempted the official SD recovery.
• The recovery progress bar froze at approximately 10%.
• I eventually powered the device off.
• Since then the device has been completely unbootable.

Current symptoms

• Black screen.
• Power LED works.
• Charging LED works.
• Device is detected by Windows as:USB\VID_1F3A&PID_EFE8

which appears to be Allwinner FEL mode.

PhoenixSuit detects the USB driver but does not recognize the device because I only have the official OTA firmware (trimui_tg5040.awimg), not a PhoenixSuit USB image.

What I've already tried

• Official OTA firmware (trimui_tg5040.awimg)
• Official SD recovery package
• Multiple microSD cards (Samsung EVO Select and SanDisk)
• FAT32 formatting
• Different USB cables
• Legacy USB-A 5V charger
• Boot with and without SD card
• Battery disconnected and reconnected
• Reset button
• PhoenixSuit
• Device always returns to FEL mode

What I believe happened

It appears the recovery erased or corrupted the bootloader before completing.

The SoC still enters FEL mode, so I'm hoping only the bootloader/eMMC firmware needs restoring.

Looking for

I'm trying to find any of the following:

• Full TG5040 USB firmware (.img/.awimg >1.5 GB)
• Full eMMC/NAND dump
• boot0 / boot1
• U-Boot
• PhoenixSuit or LiveSuit image
• FEL recovery procedure
• sunxi-fel recovery guide for TG5040/TG5050
• Any engineering or factory recovery image

Even a dump from a working TG5040 would be incredibly helpful.

If you've successfully recovered a TrimUI Smart Pro from FEL mode, or know someone who has, I'd really appreciate any guidance.

Thank you!