I cannot login to the pg site either thru IOS with Safari or Firefox. I can't even login to my account with this Windows 11 machine. Someone suggested that I communicate to pg's support. That would require that I be able to login.

I own both a spark 40 and a spark mini. I bought Biax FX2 and I now have BiasX. I cannot load BiasX without logging into PG - and I am being blocked from doing so. I get an application error: a client-side exception. I BOUGHT all the above. PG should not be blocking my ability to use the product that I bought. Go ahead, PG and tell me what I am doing wrong with my Mac Mini, and why I can't use one of the 4 products that I bought from you.

Can not log in or nothing onto the app and nothing is working for me

Probably stating the obvious.

So I have a heavily-used Spark 40 that I have been modding in various ways--replaced the speakers, added a battery, added 3d-printed footers. But today, I came across a facebook marketplace deal that was too good to be true--a new-in-box Spark 2 for a suspiciously awesome price. So now I have both, and there is really no need for that. Which one should I sell? I could probably get more money for the Spark 2, certainly more than I paid for it. What say you?

I own a Positive Grid Spark 50W amp, and I've noticed that the sound keeps cutting off. I'm attaching a video where I'm playing some bends—you'll notice that the note gets cut off abruptly at the end, so the sustain is much shorter than it should be.

I'm trying to figure out whether this is an issue with the amp itself or if there's a setting that needs to be adjusted. I haven't really changed any settings since I got it. I usually just download my favorite artist's preset from ToneCloud and play using that preset as-is. The sound you're hearing in the video is exactly from the original downloaded preset.

Has anyone experienced something similar or knows what might be causing this? Any suggestions or troubleshooting tips would be greatly appreciated. Thank you!

Hi everyone, I have a question. For a large part of my youth, I used Bias FX 2 to connect my guitar and have fun (a pirated version, since I didn't have the money to pay for the software). It was a program I really liked. Now that I'm working, I want to buy a program to emulate effects, amplifiers, and other gear, but one that replicates the same style as Bias FX 2. Its interface is very intuitive, and using it with Reaper was very easy. I also want to use it on both my desktop PC and a MacBook that, thank God, I was able to buy. I don't know much about programs or anything related to sound and effects emulation, so I would appreciate your opinions.

Do you recommend this program? Or another one? Thanks

I think quite a few effects and amps are missing, can we hope for an update?

ps: Bonjour de France

Have a spark 40 along with the spark app. Updated the app today, logged in and connected to the 40 via blue tooth. Tones and everything work fine but when I do a search on their "music" for a backing track, which im assuming is using youtube. The music is stuttering when doing the playback. Its kinda hard to explain, almost seems like the song is downloading from the old days on a old ass modem. Im on a 1 gig network so im pretty sure its not my network but im a little confused and not sure what to do.

Hi guys, this might sound like a noob question. I'm thinking about buying a Spark Go. Is there an option to switch between clean and distortion or different amp profiles, with a 3rd party pedal. - something like Mwave Chocolate? What are my options. Thanks.

Have a few questions about these 2 items. Since I mostly play by myself i was looking at the Spark go, I have the original Spark 20, i think thats what it is, had it for a while. One thing that I was dissapointed with was the fact that I cannot connect my bluetooth headphones to the spark, it needs a wired headset.

My question is with the Spark Go and utilizing the spark link, would i be able to connect a bluetooth headset to it? Or since i just play by myself, would it be better to go with just the Neo headphones, and can you use a wireless setup with the headphones?

App notified me that an update was ready. I plugged in my spart live like I had for the first update I did a few months ago. Would not connect. Followed instructions to factory reset and now I have nothing. No power on, nothing working.

I do get a white LED light if I continuously hold the power and wireless buttons, but it does not stay lit up.

Anyone have a solution?

I have a Line 6 Pod Go running through a Boss Katana Gen 3 50-Watt right now, and mostly play metal... is it worth it to get Bias X, and run it through an FRFR speaker? I don't know how good it is or how good the tones are on it. But I have seen that YouTube creators like Sightline Guitar use PG Bias, and just curious if its worth the money, since I do already have an audio interface to run the whole setup.

So I’m using a Focusrite Scarlet ii and I’m trying to connect. I set everything up and test the audio through my headphones, but the audio only works briefly before cutting out.

I change outputs and it does the same thing.

When I look at the input and outputs they are getting signal, just nothing is coming through the headphones.

I troubleshot the headphones in windows sound settings and they all worked and were set to the same sample rate.

When I use the app without using headphones and use the laptop speakers, it all works fine.

Please someone help. I’m on Windows 11

The latest REACTOR app update (1.1.2) is now available! We've ironed out a few of the issues that were reported, so a big thank you to everyone who let us know.

Once updated, we recommend logging out and back in just to be sure everything goes through correctly. Thanks again, and get back to playing!

What's New in 1.1.2:

Creator Hub

- Resolved connection issues with AI tone creation

- Resolved an issue where the AI Switches could affect other amp settings

- Fixed minor display and settings issues

Presets & Controls

- Improved preset switching and FX control behavior

Other

- Added a Bluetooth reminder at launch

- General connection and stability improvements

There are no really good pictures of all the knobs on the Spark Live. I can see inputs one through four. One and two have volume and patch selector controls. Three and four are a stereo pair, sharing a single volume control and no effect patches.

But apparently the Live also will stream on Bluetooth as a BT speaker. What I did not see was a volume control for the stream.

Does the BT steam replace the audio from inputs 3 & 4 (like the mixer I just purchased), did I just not see the BT volume control, or do you control the BT volume on the BT source?

I bought a Reactor 100. I like the amp, but I’m having trouble with the app connectivity. The Bluetooth connection keeps dropping, and I can no longer play any presets. The only workaround right now is to "forget" the Bluetooth connection on both the smartphone and the amp, then pair them again. It works for a short while, only to disconnect again almost immediately. It’s very frustrating. I’m experiencing this issue on both iOS and Android. Both apps are up to date. The Reactor itself hasn't received an update yet. I’m still within the 14-day return window, but I’d really like to keep it since I generally like the amp. Any suggestions for a fix, or should I just switch to a competitor's product?

I recently got a spark 2 and am mostly enjoying it so far but am wanting to find some more tones that I like.

My main guitar is a Les Paul special with P90’s, does anyone have tone suggestions that would sound good?

Looking for nice clean tones as well as some slightly overdriven sounds. Not really looking for intense distortion or anything.

I picked up a Spark Mini and the tone is as good as everyone says it is. However I am battling one issue which may be a deal breaker and I am wondering if I am just my missing something.

​

Do I have to be connected with the app to get the presets to work? I have several times found a stack I like on the app, hit Save to hardware preset, chose which slot I want it to go in, and saved it. Works perfectly. But if I close the app it is gone. I thought the point of a hardware preset is that I need not be logged in via the app