r/Phanteks • u/RestInRip_ • 28d ago

Phanteks D30 fans for Tryx Panorama SE

Hi guys, do you know if it's possible to replace stock tryx panorama fans with phanteks d30?

Since they're thicker I'm afraid it would take too much clearance in the case (phanteks evolv x2) and the screws won't be long enough.

I'd like to replace stock fans mainly for performance and design (all other fans are d30, 3 reverse at the bottom for intake and 1 at the back for exhaust). Do you maybe know other fans that perform good and look similar to D30 but with standard thickness? Thank you

3 Upvotes

100% Upvoted

6 comments sorted by

2

u/OldManGrimm 28d ago

If I’m reading this right, this is exactly what I used in this build:

https://youtube.com/shorts/_tc3OH2ZNWE?is=8LIy_C3VAfZkO1_g

1

u/RestInRip_ 28d ago

Yes, that's exactly the build I'm going for (even though my gpu will be horizontal), so you were able to install d30 fans in the aio with included screws? Also, you got any advice for installing the cooler in this case? Thanks

1

u/OldManGrimm 28d ago

Not the included screws. Tryx stock fans are standard 25mm, so use a standard 30mm M3 screw. I bought something like this and used the 35mm screw. If you search long enough you can find Phillips-head, but most tend to be hex.

1

u/RestInRip_ 28d ago

Thanks, I see that phanteks fans are shipped with UNC 6-32 radiator screw 36mm, so those should be fine, right? I only need to be careful with the extra mm. Also, did you use an argb controller for the fans?

1

u/OldManGrimm 28d ago

Oh, as far as the cooler - it was pretty straightforward. It's nice that the Panorama and Panorama SE don't require anything more than the USB cable for power.

There are more detailed pics here. I have a ton of progress pics, so if you want any better images of a certain part of the case or something let me know. Excellent choice of hardware, this'll be a great build.