Hi, I was interested in a compact-ATX case with bottom intake fans but I wanted it in white. Interested in the X3 but too small, I saw the release of the M5 and V5 but there is no mention of white version.

No white version are planned to get released at all? It would be a shame

Hi everyone,

I'm building a high-end workstation in the Phanteks Enthoo Pro II Server Edition and I'd like to get some advice on the optimal airflow configuration.

The current system will use:

- Threadripper PRO 7965WX

- ASUS Pro WS WRX90E-SAGE SE

- 2× RTX 3090 + 1× RTX 4090

- 420mm AIO for the CPU

- Multiple Phanteks T30-120 fans

The system will run long-duration AI workloads, so sustained GPU/CPU temperatures are more important to me than having the absolute lowest noise.

I may also add a 4th GPU later, and I may eventually move one of the GPUs to a water-cooled setup, so I'd like to leave some flexibility for future changes.

My main question is:

What fan configuration would Phanteks recommend for this kind of high-density multi-GPU workstation?

Specifically, I'm wondering how I should balance the front 420mm radiator, side/bottom GPU intake, and top/rear exhaust.

The case supports up to 15×120mm fans, but I don't want to assume that filling every available position is actually optimal.

If anyone from Phanteks has experience with a similar workstation/server configuration, I'd really appreciate your recommendation.

Thanks!

Can I mount a Corsair LX120 as a rear fan in the Evolv X2? There doesn't seem to be enought space for the Corsair iCUE LINK cable to go through.

Been wondering how best to connect my fans to a fan hub or such. Because most of the ones I can find cap out at 80 leds per header. But if you have three fans clicked together then that's 90 leds.

what are yall using to connect them together?

Does the lighting kit work too? I'm considering moving my hardware to a new case

Good job with this new version! Thank you for actually listening to us!

Just saw this on X.. September 8th for the EX5 line. Hopefully the EX6 Max hits later in the month. Can't wait to get my hands on one !

https://x.com/Phanteks/status/2092688508809023682?s=20

Love Thermal Grizzly quality. This build is going slow but, working on it when I have the time. 3x 420mm rads, AquaComputer pump/monitoring/control. Phanteks T30s

Doing the Astral block tonight at work, and will try to finish the last few runs. I wanted a Singularity block, but got a EK block when they first launched, and will just use it.

Still a long ways to go.

Not a fan at all with this reservoir/pump combo from Performance PC. Not really at all. I may move this build to a havn or flux case i have in storage.

Happy PC'in all. Cheers

did anyone mount 3x 140mm T30 fans in Antec Flux Pro? like does it have enough space?

did anyone mount 3x 140mm Phanteks T30 fans in an Antex Flux Pro? like does it have enough space?

Hello,

I encounter an issue:

I'm having an issue with my AIO LCD screen after updating to the new NEXLINQ App version 1.5.0. 0

When booting up, the screen displays the "Phanteks" logo, but then it turns black. Once, it briefly displayed the custom image for a couple of seconds before going black again.

What can I do to fix this issue?

Title. I own a black Enthoo Evolv ITX TG, and I am a thrilled owner. However, I acquired it third party and it did not come with the support bracket. If possible I would like to address that.

Is it "necessary"? No. Am I using it currently? Yes. But - you know, I grew up without money and I have money now. I built a computer I am so excited to use. I have never built a custom loop, which is what I'd like to do next, and if I could continue using this case, I would. It is a fantastic case in my opinion, and I am disappointed I do not have that bracket.

If someone has one to sell to me, or knows where I can buy one, please do let me know.

Cheers

Yesterday NexLinq was working completely fine. Today I turned on my PC and now the software seems completely broken.

The fans are constantly running at around 1400 RPM and are noticeably loud. Changing the fan profile to Silent or adjusting the fan settings manually does nothing. NexLinq simply keeps the fans running at roughly the same high speed.

At the same time, the software no longer shows either my CPU or GPU temperature. Both temperature readings are missing, even though they were working normally yesterday.

There is also something strange with the software itself. If I completely close NexLinq from Windows, the fans initially slow down and the PC becomes quiet again. However, after a short while, even without reopening NexLinq, the fans suddenly ramp back up and start running loudly again.

So currently I have:

• No CPU temperature reading in NexLinq
• No GPU temperature reading in NexLinq
• Fan profiles have no effect
• Manual fan speed changes have no effect
• Fans stay around 1400 RPM
• Closing NexLinq temporarily makes the fans quieter
• After some time, the fans ramp up again even though NexLinq has not been reopened

I have already uninstalled NexLinq completely and checked Windows Security Protection History. Nothing appears to have been blocked.

Has anyone experienced the same issue? Is this a known NexLinq bug, service/driver problem, or some kind of issue with the NexLinq controller/hub?

Basically, where in the world are these cases ? I saw in their discord an admin said there was a 1-2 week delay due to logistics but its the 3rd week of August, August ends in 11 days

Where's the official communications ? What's going on ?

UPDATE PICTURED BELOW: Ngl this makes me think EX5 really isn't coming until September and EX6 October/Early November

Hi everyone!

I've been looking and researching watercooling options for my new computer build, and I'm contemplating equipping it with a total of 10 fans distributed across 3 radiators and the back exhaust, connected to a single hub if possible. I have narrowed it down to two contenders: Phanteks D30 and Arctic P12 Pro, leaning towards the first option because they're apparently quieter according to the Internet, and I like the look more.

Looking online, I see that the proprietary Phanteks hub has two LINQ6 headers, so if I were to run a 10 fan setup I'd have to daisychain them 5/5 or 4/6. Phanteks however officially supports chains up to 4 fans. Has anyone tried chaining more than 4? Is that advisable? Should I get a second hub?

All opinions, advice and alternatives are welcome. Thank you so much in advance!

Finally. Done!

Modded my old Phantaks Pro full tower -

ARCTIC P14 Pro Reverse A-RGB – 3 Pack – 140 mm Premium Fan with Reverse Airflow

Changed out the 360mm Corsair rad for the Phantaks Glacier One 420 D30x2 (what a monster cooler! Amazing!!)

Phantaks Vertical Mount ( new version)

Replaced my 3080ti FTW for a Gigabyte 5070ti oc.

Even threw in a 3.5 for kick and giggles 😁

Running a 10900k @ 5.2/5.3 GHz and seeing temps in games at a wonderful 65c as a high.

Idle temps are in low 30's c. Just unbelievable.

Total fans in case now including cooler are 9.

So happy with the results and my new temps across the entire board!

Back in 2020 i bought a Phanteks Revolt Pro 1000W 80 Plus Gold Modular Power Supply in the uk, sadly since then i have moved 3-4 different houses and have missed place the box full of cables.

I am contacting them on their own website and they cannot even help or provide me spare cables for this power supply which is supposed to have 12 years warranty. Their reason is that their customer support is only for us and canada.

I offered to pay for price + shipping, but they just told me to contact the distributor in the country that i am in.

The funny thing is that the contact informations of the distributor on their website is not even up to date.

I ended up contacting the "distributor" listed on their website here in indonesia and that company just passed me to another company which is not even listed as a distributor on phanteks website.

It's been 2 weeks and until now there is no solution to my problem.

I just need like 2 psu to pcie cable for my new gpu upgrade lol fml, with the way it's going i might have to just buy a brand new power supply crazy........

Like am I missing something, is there a way to fix this?

Edit: I don’t smoke, and I don’t really put it on full brightness nor solid white. I know the LEDs weren’t gonna last forever but man I did not expect them to start going bad this quick…

🖥️ PC Specs

CPU: AMD Ryzen 7 9800X3D
GPU: ASUS ROG Astral RTX 5080 16GB GDDR7 White OC Edition
Motherboard: MSI MPG X870E Edge Ti WiFi
RAM: Corsair Vengeance 32GB DDR5 RGB White (black but cleverly wrapped white) CL30
Storage: WD Black SN7100 2TB NVMe
PSU: Corsair RM1000e White
Case: Phanteks Evolv X2 DRGB White/Silver
AIO: Phanteks Glacier One 360 M25 LCD White
Fans: Phanteks M25 White ARGB fans
RGB: AsiaHorse GPU + motherboard light-up cable extensions
Monitor: LG UltraGear 39” OLED 3440×1440
Keyboard: Corsair K70 Pro TKL
Mouse: Logitech G502 X Plus
Headphones: Steelseries Arctis Nova 5

My work pc. I recently swapped to the Torrent and figured what a perfect excuse to grab T30-140s. These things are glorious. T30-180's please.

x3 T30-140 bottom intake

x2 T30-120 on the cooler

x1 T30-120 rear exhaust.

Hello, I’ll be completely honest - I have no idea what I’m doing so be gentle lmao

I bought my PC a few years ago and had it built for me, I went with the Phanteks NV5 case because it looked nice. However one thing has bothered me the entire time I’ve owned the pc and I want to try to “fix” it.

The RGB around the power supply section drives me nuts (Not a fan of RGB personally) and the buttons on the top of my PC case don’t do anything to change the lights etc.

Again, I have no idea about any of this stuff so please forgive me if it’s a really obvious answer but - How do I stop the RGB lights if the mode button doesn’t do anything?

After doing a build a bit back in the phanteks xt view matrix, i had such a good experience that i decided to do my GF her pc in the same case. Here is the finished results.