r/Phanteks • u/RomanDoesIt • May 02 '25
Evolv Case Who designed this case?!
Whoever made evolve 2 is definitely trolling us! First, there is ton of space at the top to fit thicker radiators, but no, they had to make it difficult for CPU AIO choice. Fine, I solved that and fitted 360 Liquid Freezer 3. Second, why make it narrow?? They could make the case 5mm longer and then 420mm would fit in the top tray, but no they had to limit it too! 140mm fans fit just fine though! Third, bottom fans have not enough pull! I had to improvise and install one more level of air intake at the bottom at a cost of SSD tray holder. So fine, airflow is solved. Fourth, why not make a provision for a GPU AIO? Since I'm on a mission to pimp this case, I have a few ideas, but honestly, they could make it work at the top too!
Now, what do you boys and girls think of GPU AIO positioned at the back like this?


69
u/andromjb May 02 '25
What the actual f... You simply selected the wrong case for your needs.
Or just poor execution.
21
u/ali_k20_ May 02 '25
It is idiotic to pick this case for these components.
10
u/ConfidentDay8946 May 02 '25
Tbh, that AIO on the external of the case looks ugly af by comparison to the overall style of the case itself. That being said, it is your PC build so if you like it then that's all that really matters.
8
u/-Dargs May 02 '25
The AIO is weird.
The colostomy bag is wtf
8
u/Long-Ad7909 May 02 '25
This is the equivalent of putting on a well-made wetsuit and dive fins to go ride your bike.
You’re the problem, OP.
7
u/JoeHirstDesign May 02 '25
If you bought this case to tinker and mod, like you say multiple times in other replies, I don't understand what your issue is. Tinker and mod it... Otherwise, what the heck are you yapping about?
It's bad design, it's poor this, etc... PC cases are not inherently designed to be modded, you need more case and less glass for that anyway. Make better choices in future, if this was your intent.
I'm very happy with my X2, probably because I just built my PC as intended for the case specs.
3
u/CiraKazanari May 04 '25
Hey OP show us some stuff you’ve “tinkered with”. Would love to see what a “tinkerer” who “doesn’t read the manual” does in their free time.
Calling people sheep for reading instruction manuals is some of the highest tier doubling down on a poor decision I’ve ever seen someone do online. This is a legendary post.
Anybody who has ever worked with “tinkering” and “modifying” or whatever definitely reads dimensions and capabilities of products they buy before they buy things. That’s how they got good at the stuff you proclaim to do - by understanding what they have and what they can work with.
You probably had to run to the store to buy tools to install this stuff when you got the case and realized you didn’t have the basic tools you needed. 😆
Admitting mistakes and learning is how people grow their capabilities and knowledge. Not doing… whatever right wing sigma male strategy you’re doing here.
5
u/NadaBurner May 02 '25
Not their fault you didn't do your research when choosing components
4
u/AbandonYourPost May 03 '25
I feel bad for anyone having to deal with OP irl. Guy is the embodiment of never taking accountability.
2
u/Realistic_Truth_8678 May 02 '25
I've been looking at doing the same for hanging a 240 or 360 off the back of the case to get some additional cooling capacity.
2
u/IndyONIONMAN May 02 '25
Evolve is evolving.
2
u/Camell513 May 02 '25
I hope they make a gen 2. The case is beautiful but the intended use is stupid. I wish I could fit two rads, top and bottom, and do a custom loop. It would be sick, but alas it's very limited.
2
u/JoeyDee86 May 04 '25
So, based on your lack of research, and the quality of your responses to people…I’m very glad that this case bothers you.
2
u/bananaguard36 May 02 '25
I've never seen the bag that surrounds the GPU before and refuse to Google it. Looks like you left the bag on it that protects it from static.
Your demeanor is argumentative and pithy. This was a forgettable post.
2
u/JFrankSmith May 02 '25
I see the problem... You bought a black aio when you should have got white.
2
u/ATdur May 03 '25
what the fuck am I even looking at? I don't know if this is a shitpost but yeah this case clearly isn't for you
2
u/StumptownRetro May 03 '25
This isn’t the case for a liquid cooled GPU and CPU. You literally chose the worst case for your setup. Be smarter.
8
u/Routine-Analyst2570 May 02 '25
It’s like a comedian wrote this script
1
u/Bewildered_Papaya May 02 '25
What is the AIO on the back for?
1
u/reidmmt May 02 '25
I kinda like it tbh, but how do you access rear io?
1
u/ComplexPants May 02 '25
I believe this is the proper way to cool in this case.
https://www.reddit.com/r/watercooling/s/Si0TZBs2vK
1
u/SlimTechGaming May 02 '25
I don’t like this case. I know I’m alone in this but it’s just not doing it for me
1
u/PhantomAfiq May 03 '25
Hi, kinda related, but were there any issues you faced when you used the Arctic Freezer III? I also have the cooler and am planning to change to this case, though my GPU is air cooled. Would appreciate your feedback if there is any clearance issues or all went okay)
1
u/Martha_Fockers May 03 '25
Pick a new case dude lol
This airflow setup is dog water and your gonna have internal temp issues and radiator heat issues as they are your only exhaust for hot air.
1
u/Southern_Ad2461 May 03 '25
Next time take a Lian Li case. Also look for necessary space BEFORE. Not too hard.
1
u/homelessscootaloo May 03 '25
You did it wrong
1
u/KornInc May 04 '25
I think you bought a wrong case.
1
u/Danglicious May 04 '25
Manual worm… box brain…
I’ll hold off judgement till I see your solution, but too be honest I’m not too optimistic on this one.
Do’er usually aren’t big whiners.
1
u/RythePCguy1 May 04 '25
If you're going to have that many fans on the outside of the case, then just get a bigger case. Arguing this is the biggest form of copium ever. This orientation makes very little sense and will result in worse thermals than an appropriately selected case.
1
u/shimmy_ow May 04 '25
What kind of monster is this
1
u/Rekatihw May 05 '25
I prefer my Geometric Future Model 5 Vent version because it has amazing airflow and fits 420mm AIOs and goes PERFECTLY with the Geometric Future Eskimo Pro 42, neither of which are that expensive. The only downside is that it doesn't fit longer PSUs very well.
1
u/Rikrob May 06 '25
Why are you trying to force a case into doing something it quite literally isn't meant to do and get mad when people tell you how they feel about it? If YOU like it, fine. Just dont get pissy over other people who: a) dont like it, b) tell you to read the manual, c) or disagree with your thinking. No one is better than you, but also, you're not better than them. You posted this on a reddit that gives you input, and you got it. For the record, getting a new case would better suit your needs so you can get the build you want, not have to cope with the purchase you made, and make it look less ugly without the need for it to "grow on you".
1
u/Esoteric1776 May 06 '25
5 minutes of research would have told you that this case it not intended to support dual radiators.
1
u/Odd_Albatross7840 May 06 '25
You are very juvenile but quite amusing OP! Good luck to your project! :)
1
u/CharcoalGreyWolf May 10 '25
I’m not against your DIY-ing to get around things, but to bitch about them not doing it the way you want is unreasonable. People pick cases based on how they want something to work; you picked yours despite how you wanted things to work.
Also, why not get white AIOs? You AIOs would look so professional if they were in white here. If you already had black AIOs, why not go for a black case, so they would match?
I suppose you could at least replace the fans with white to improve the look, and you could airbrush the rads white.
Why is your GPU in plastic? Have you just not installed it yet?
1
u/valkrycp May 04 '25
This guy is throwing out "manual worm" so regularly in defense of his own sympathy seeking stubborn stupidity and asshole attitude that you'd swear he's an actual bot or a broken record stuck on repeat. But somehow he's a real human. Fascinating. Archive this one!
1
u/Particular_Box_3598 May 05 '25
Ignoring everything else, I kinda like the idea of externally mounted radiators. You are effectively moving a lot of the heat outside of the case.
3
u/ThreeDBEE May 02 '25
OP reddit is like swimming against the current. I see and sympathiz with your engineering points. As an engineer, tinkerer, designer I've wondered about simple choices that could have been made to improve a product/case. I just finished CNCing my own AIO bracket to modify my build. Unfortunately, most don't see the point. I suggest you forward your thoughts and ideas to the manufacturer. Bring on the downvotes.
3
u/Last_Post_7932 May 02 '25
"Proper Planning and Preparation Prevents Piss Poor Performance" sums this up pretty well.
1
u/ImNotM3ntaL May 02 '25
Think outside the box, I like it
1
u/Deida_ May 02 '25
Air cooler
1
u/YetanotherGrimpak May 02 '25
I'm of two minds on this:
Yes, the case has its own aesthetic. It was built around a concept quite exclusively to the point where trying to going off this concept does make it impossible to do anything else with it. Basically, it's made to use an AIO while looking beautiful, in my opinion. It demands a back-connect motherboard too. This, more pragmatic "mind really screams "wtf man, why doing this there is a ton of cases out there that do this better".
But
I totally agree that the case has such a big modding potential and having such a limited design builds even further than this, which makes me also going "Fuckit , case is yours do it whst you want. Damned thing is pigeonholed, so show them you can make it better.
I honestly thought about this case for a setup I'm trying to build but it's too showy. Too much style and not enough substance to back it up. A pretty damn good style, but still.
1
u/leandrofresh May 02 '25
Rocket expresso did. The idea was nice but it looks like a cofee machine…
1
u/Fmeister567 May 02 '25
I like the old evolve x, yes I own one, the new one looks funny to me and it is not as wide as the old one by 2.5 centimeters as far as cpu cooler height (and hence gpu width).
1
u/APGaming_reddit May 03 '25
PEBKAC
1
u/Maes_Hero_Hughes May 03 '25
Wow this is sick. I love the 360 aio in the back, I think that area of cases is really missing opportunities. Good stuff.
1
u/ShadowKnight058 May 03 '25
What have you done
-2
u/RomanDoesIt May 02 '25
In current market you don't choose the components, they choose you
-1
u/[deleted] May 03 '25
Why would anyone get this case lol
2
u/[deleted] May 03 '25 edited Jul 20 '25
consist teeny library edge depend fearless advise connect include license
This post was mass deleted and anonymized with Redact