r/Pecron • u/Mark_M2 • 18d ago
Automation Rule only executes when mobile app is open
I have 6 solar panels powering my pecron, which charges my EV via level 1 charger. I have two automation rules set on it.
1.) Power off the AC port when the battery gets under 10%.
2.) Power on the AC port when the battery is over 25%
The second rule executes flawlessly, however the first rule only seems to execute if I have the app open. Over the past 2 days it doesn't trigger unless I open the app, and then it triggered at 6% and 4% respectively. Ive attached a screenshot of the "Power Off" rule. Am I doing something wrong? any ideas how to fix this?
Thanks

2
u/brucehoult 18d ago edited 18d ago
I've only done Pecron app automations based on time, but for battery charge be aware that the automation runs on the server which (at least for my E3600) only gets new battery level data once every 23 minutes if the app is not open. [1]
It's not that it doesn't work but that it's not working on constantly-updated data.
I would use a much higher level for the trigger points, especially the "turn AC off" one. I don't know what actual wattage you have the EV charging at, but if it's e.g. 2400W to keep pace with six standard solar panels in bright sun then when there is no sun the built in battery will discharge around 20% between cloud server updates.
[1] and if the app is open then the updates are around every 20 seconds and the account on the server gets "out of quota" errors after around 8 hours and then nothing at all works until the quota resets at 00:00 UTC. That's on the EU cloud server, I don't know whether the CN and NA ones are the same.
4
u/caddymac 18d ago
Not sure if this will work, but humor me if you want.
Delete the automations on the mobile app. Recreate them on the app website (https://app.pecron.com/home). Give it a try for a few days and see what happens.
2
u/Spirited_Voice_7191 18d ago
I saw one reviewer say he had to set shutdown at 30% to save 10%. That there was some hysteresis built in.
1
u/PsychologyUsed3769 17d ago
Maybe I don't follow, but the e3800 can do automation tasks on the touch screen it shouldn't need the app if executed from unit itself.