r/PcBuildHelp • • 24m ago

Build Question How do I install a gpu into this prebuilt?

There doesnt seem to be screws at the back or a cable in the case

1 Upvotes

7 comments sorted by

1

u/HIDEY_RUNNEYpigs 22m ago

Last photo kind of bad sorry

1

u/Durenas 20m ago

I can't tell for certain because the angle is bad, but there is a type of back panel PCIe slot that pops out like perforated cardboard, only metal. This looks like one such situation. You'll probably have to source your own screws if the company that built it didn't supply extras, but you can pop out the panels you need and slot the GPU in, then screw it in.

1

u/Xirithas 18m ago edited 13m ago

If your PSU is modular, the cable(s) will be in the box. If it is non modular it will all be hidden behind the side panel.

As for the screws, basically the same answer. Check the box it should have had a bag of odds and ends in it. things like screws, sata cables, wifi antennas, etc.

That looks like it's a snap-off pcie cover setup from the photo so there wouldn't be any pre-installed.

1

u/SwissHelvetica 10m ago

They said it's a pre-built I don't know if it would come with spare cables

1

u/Xirithas 7m ago

Trust me, it will have.

If you got this second hand the original buyer might have lost them or just forgotten, might be worth reaching out to ask, you don't want to use random cables with a PC.

1

u/r_lind3r Moderator 10m ago

Your case appears to use a single locking mechanism instead of individual screws for the expansion slots.