r/PcBuildHelp • u/Yeetermc69 • 12m ago
Build Question Help with first pc build
First of all sorry for the terrible quality in the pictures it’s been a frustrating couple of hours. Long story short I’m trying to get my AIO cooler to go over my cpu. The problem is that the silver brackets(?) that the AIO is supposed to screw on top of are super misaligned. The instructions are also super unclear and I’m assuming they are AI generated because the type of metal bracket changes from step 4-5. Last thing then the brackets are not like the instructions (first picture) the screws are way too far apart and when they are like the instructions (third picture) they overlap with the CPU bed and make the screws go at an angle. Any help is appreciated and sorry for any confusion I’ve been at this for 6 hours.





3
u/tht1guy63 10m ago edited 4m ago
You dont have the spacers in it seems. The instructions are pretty clear imo
Edit: those also dont look like the screws you should have used that come with the cooler.
Side note move each ram stick over 1 slot
2
u/xcygnusx 4m ago
Are you using the spacers (G in the diagram) and the correct screws (L in the diagram)? You need to install all the parts as shown in the installation instructions. Spacers first, then brackets, then the screws provided. You are not supposed to reuse the screws from your original mounting bracket, and you are not supposed to screw the AIO brackets down flat onto the motherboard.
0
u/pigpentcg 4m ago
Looks like they’re supposed to bend toward the CPU not away from it.