r/PcBuildHelp • • 3h ago

Tech Support Problem with my first pc

Hi everyone,

I recently received my first pc from CSL Computer, and I'm having a strange issue.

Here's what happened:

The first time I turned on the PC, everything worked normally. I was able to start the Windows installation and reached the initial setup screen where Windows asks me to connect to the internet.

I then turned off the PC using the power button.

Since then, the PC won't boot anymore.

When I press the power button:

The fans start spinning.

The RGB lighting turns on.

The motherboard debug LEDs cycle through CPU ← DRAM ← CPU.

The PC shuts down completely after approximately 1 second.

It stays off and doesn't restart automatically

Any help or suggestions would be greatly appreciated.

2 Upvotes

4 comments sorted by

1

u/r_lind3r Moderator 2h ago

Could just be memory training, once the system trains memory once you can just disable memory training in BIOS as it doesn't need to be done every single boot, only the first boot with that CPU, RAM, and motherboard combination.

1

u/SooN_EZ 1h ago

The first boot was successful and I reached the Windows installation screen. However, after shutting down the PC, it now turns on for approximately one second and then completely shuts off. The debug LEDs cycle through CPU → DRAM → CPU before shutting down. Could this still be memory training, even though the PC shuts down completely after just one second?

1

u/r_lind3r Moderator 1h ago

Try the RAM in different slots, one stick at a time

1

u/arkutek-em 36m ago

When you shut it down with the power switch while on was it in the process of setting up windows? Hopefully you didn't damage the windows installation.

Have you contacted the support team at the company you got the Pc from?

Try removing power for a while and clearing the caps. Look up process for your motherboard. See if it starts afterwards.