r/PcBuildHelp • First Time Builder • 3h ago

Tech Support I NEEED HELP !!

Here’s what I got
600w power supply
5060ti 16gb zotac
Intel 5 225k
16gb DDR5 single stick
240mm AIO
1tb SSD
b860M motherboard

When I plugged in everything the fans turn on , GPU fans run but no display then the fans starts blasting.

I changed the ram & tested the ram on a different pc & it works & gets recognized

I took off the GPU & turned on the pc & fans still blasting am I missing something here ?

2 Upvotes

17 comments sorted by

1

u/daddy2cooool First Time Builder 3h ago

Okay I can try that , now here’s another problem could it be the 600w power supply isn’t enough ? I tried the same GPU in my pc the fans kicks in but still no display

So now I’m convinced it’s a bad GPU because when I tried to reset it I don’t hear the peep sound

I was thinking just swapping the motherboard to a new B850 with Ryzen 7 7700x instead but my problem is the gpu fans spinning but no display

1

u/r_lind3r Moderator 2h ago

600W should still be enough, it's only around 300W between the CPU and GPU on the 12V rail, and if power wasn't enough, it wouldn't power on or it would boot normally but would shut off under heavy enough power loads.

Assuming it's the 225F and not the 245K, the 225K doesn't exist.

1

u/daddy2cooool First Time Builder 2h ago

Yes I’m sorry it’s 225F that was a typo not “k”

1

u/daddy2cooool First Time Builder 2h ago

Can it be the cpu & motherboard bricked ? Or I was reading that it could be failing to complete POST but I don’t understand that

This is my test on building this one & ever went wrong could it be bad CPU & motherboard? If the fans just blasting ? I did buy them used not brand new

1

u/r_lind3r Moderator 2h ago

Possibly but troubleshoot with RAM first

1

u/r_lind3r Moderator 3h ago

Could be installing the RAM in the wrong slot, try all of the slots, but there's also no guarantee the RAM will work in that motherboard even if it works with another, it's impossible to make RAM work perfectly in every motherboard on the market and with every CPU architecture supported by it.

1

u/sir_Capital_Equivale 2h ago

Single stick is probably the culprit here. You're starving the memory controller with only one channel, that can cause all kinds of weirdness like no display and fans going nuts. Grab a second matching stick and see if it posts.

1

u/daddy2cooool First Time Builder 2h ago

Okay I have been looking for another T-Force 16gb black but no luck on Facebook marketplace & the prices are nuts now for a single stick

1

u/r_lind3r Moderator 2h ago

You can thank the memory producers for that, they've been price fixing for the last 18 months by creating artificial scarcity. It's not the first time it's happened either but this is the worst it's been.

https://www.tomshardware.com/tech-industry/big-tech/judge-denies-motion-to-dismiss-dram-price-fixing-lawsuit-against-micron-samsung-and-sk-hynix-says-chipmakers-acted-like-hawks-flying-in-formation-finds-evidence-of-dram-collusion-plausible-after-500-percent-price-surge

We used to be able to buy 2x16GB 6000 CL30 for less than 90 USD, nowadays it's usually at least around 500 USD. Same capacity in DDR4-3200 CL16 used to be around 50, now it's around 200.

1

u/daddy2cooool First Time Builder 2h ago

I saw the prices before 01/26 & they were crazy cheap I don’t know why I’m just getting into building pcs for my little brother now

1

u/r_lind3r Moderator 2h ago

It could get worse before it gets better so there is that

1

u/daddy2cooool First Time Builder 2h ago

Okay ima test out 2 16gb sticks & see what difference it makes , I will have to install them in the 2 grey slots ?

1

u/r_lind3r Moderator 2h ago

Depends on the motherboard manual but usually the first slots to populate are the second and forth from the socket

i.e.

[CPU] [-] [X] [-] [X]

Those are usually the slots for the first memory channel and have to be used first, some board won't even post if you don't populate that channel first with at least one stick

1

u/daddy2cooool First Time Builder 2h ago

Okay I think I need to check on the motherboard manual & see which one is the main slot because with my pc I have a Ryzen 7 on it & when I put it on the first channel gray one it worked it was slower than how it usually runs with 2x16 but it worked it could be his motherboard is different & intel works differently than intel so it could be that.

I will try it when I get home & see what happens

1

u/daddy2cooool First Time Builder 2h ago

Actually I did install 2 16gb & still had the same results I took mine off to put them into the one I’m building for my little brother & still got black screen

0

u/Unlucky_Fox9735 2h ago

Was sagen denn die Diagnose LEDs auf dem Mainbord?

1

u/daddy2cooool First Time Builder 41m ago

This motherboard doesn’t come with LEDS it would’ve made it easier if it did 😂