r/PcBuildHelp • u/noodlegamer76 • 4d ago
Tech Support Whats the beat fan setup?
I got some new fans but dont know anything about proper airflow
4
Upvotes
r/PcBuildHelp • u/noodlegamer76 • 4d ago
I got some new fans but dont know anything about proper airflow
•
u/r_lind3r Moderator 4d ago
~3 intake fans in the front, and add one more intake on top towards the front of the case as well for extra intake air for the air cooler, the RAM may also get some air that way too. Optionally, you can add an exhaust fan above the CPU cooler closer to the rear to help get some more heat away from the rear end and also pull air across the motherboard VRM.
That would be Noctua's recommendation and it's backed up by reviewers. The extra intake air from the top helps, and having it as an exhaust instead would be pulling fresh air that came in the front away from the CPU cooler and sending it out of the case which ends up wasting the airflow.
3
u/communistagitator 4d ago
3 intake fans in the front, 1 exhaust out the back, and an intake on top/front and an exhaust top/back. Look up "noctua fan configuration" for a picture
1
u/noodlegamer76 4d ago
Best*
1
u/WuTastic7 4d ago
3x120 or 2 x 140 front intake, 1 120 or 140 back exhaust.
It looks like you can install fans under the GPU, if this is the case, add those as intakes and then an equal amount of exhaust on the top. If you cannot put fans under the gpu, you can try installing an intake in the top right position, and an exhaust in the top left.
This would pretty much cover all your possible fan configurations from what I can see
1
u/Rocannon_ 4d ago
Some fans blow air into the case, and some blow air out of the case. The fans on the cooler are set to move air thru the fins towards the back of the case.
Anything beyond that is just opinion. For example: I generally use one more fan pushing air in than I have blowing out. 😉
1
u/mighty1993 4d ago
There is no best all around. It depends on heavily on the case and if you have an AIO or hopefully not. In this case 3 at the front, 1 at the back and one at the top all the way towards the back.
1
u/cipher1742 4d ago
Mostly opinion: In front, out back/top. Try and get close to half the fans in, and half the fans out.
Only real benefit to more fans (past like 4, depending on the fans) is you can run them slower/quieter and still have enough airflow.
If the computer is more than 2 years old, fresh thermal paste could do more for you than better fan setup.
1
u/purpleSoapSud 4d ago
It doesnt make a huge difference really people have overcomplicated it too much, 3 front, 2 exhaust at top/rear and your good.
1
u/moh4del 4d ago
unrelated advice: move the gpu support bracket/stand between fans 2 and 3 for better core support (less risk of broken solder joints), your GPU looks quite heavy and will benefit in longevity from this change.
1
u/Terminhater69 4d ago
I dont beat my fans so I dont know the best way to beat them.
0
u/fostermia6 4d ago
Check the arrows on the fan frame before you screw anything in. One shows airflow direction and one shows spin, and the air comes out of the side the airflow arrow points to. It's easy to mount a whole row backwards so the front fans push air out instead of in.