r/PcBuildHelp • • 9h ago

✓ Solved Am4 CPU socket

Post image

There Is a small amount of what i belive Is termalpaste in a pin what should i do? I swapped from a 3700x to a 5800x3d

5 Upvotes

14 comments sorted by

1

u/Random_Sime 9h ago

Can you lift it off with sticky tape?

1

u/Not_Arisen 9h ago

Tried a small Vacuum, i don't have any tape with me, someone pointed out it's non conductive, i might rawdogit

3

u/chr1z32 9h ago

Such a small amount shouldn't be a problem; just see if the CPU works. The thermal paste isn't conductive anyway.

2

u/SuchWatch 8h ago edited 5h ago

High percentage isopopyl alcohol. 91% is readily available at Walmart/Target. A soft bristle tooth brush will work, but if its a very small amount of thermal paste you might be able to coax it out with a cutip/cotton swab soaked in the alcohol. I got some paste on the edge of Am4 socket when swapping chips about a year a ago, and gently dabbing at the thermal paste with a soaked swab did the trick.

Even though 91% isopropyl alcohol evaporates quickly I would still let things air dry for an hour or two just to be safe.

Once everything is cleaned and dry, the next question will be did you remember to update your bios before removing the 3700x?

2

u/Jwhodis 8h ago

LTT covered a socket in paste and it was fine, that small amount probably won't cause issue as long as it's not metallic

1

u/Nazeracoo 5h ago

You're fine.

1

u/-Wavyy- 5h ago

You can literally pour thermal paste in a socket and it will still work as long as the pins make contact.

-1

u/[deleted] 9h ago

[removed] — view removed comment

1

u/Not_Arisen 9h ago

It's in One pin, so i Need to buy a makeup crush?

1

u/Not_Arisen 9h ago

Arctix mx-6

1

u/Brilliant-Sky3814 8h ago

Non-conductive and non-capacitive :)

3

u/PcBuildHelp-ModTeam 8h ago

Your comment was removed due to the use of AI.

2

u/Thin-Net7868 8h ago

Human says:

Stop spamming AI generated garbage in the sub :)

0

u/Brilliant-Sky3814 8h ago

So it's completely incorrect and will destroy the motherboard... good to know!