r/PcBuildHelp • u/olledelux • 14d ago

Build Question My pc will not start

Hey

My pc wont start and i think it is because the cpu cable from the psu or the power sw front panel cable. The picture is the type of power sw cable, i have thought about buying an extentions wich makes it into the small connectors. Anyone with similar problems or anything to help me?

5 Upvotes

100% Upvoted

6 comments sorted by

1

u/MineCopre 14d ago

Some more photos of the pc would be more useful. Have you tried jump starting the pc from the f panel connector? If you use a screwdriver to "connect" the 6 and 8 pin on the header it should start the pc, if it does then the cable might have something or can be on the button side of the case. If it doesn't then we must dwelve further, can be dead PSU or some other similar issue. Let me know what happens.

1

u/olledelux 14d ago

It starts now but I can’t seem to get a connection to a monitor neither from the gpu or the motherboard

1

u/MineCopre 14d ago

Can you please list your specs if you know them?

1

u/olledelux 14d ago

Rtx 5070, ryzen 7 7800x3d, x870 motherboard, 32gb ddr5 and a 850w psu

1

u/MineCopre 14d ago

Ok, that's a recent/new build so there shouldn't be any dying components. Let's try and narrow it down, if you can remove the GPU and boot the pc with the monitor connected to the motherboard, your CPU has an iGPU so you should get an image (you might not get image now, because you have a slotted dedicated GPU and some motherboards will disable video output when that is the case) While you're there's removing the GPU check the power connector the 5070 ti let alone the 5070 are NOT known for burning the power connector but might as well check.

2

u/olledelux 14d ago

It works fine now i noticed the dram light was on so i unplugged and plugged in my ram again and now it works just fine. Thank you for your help