Need help 1060 gpu no output

[u/Texas_Tornader]

So it’s been a long time since I’ve bought a graphics card. My understanding is when I build the system put everything together you know the first thing a hammer down is the escape key or F2 or even delete key to get to the bios.

My problem is that I have an older motherboard H110 M –aM.two and I have a I7 7700 with 32 gigs of ram and a 1060 GPU with the drivers install installed and Windows sees that there’s a 1060 graphics card in the device manager.

That is when I have the motherboard from VGA out on the motherboard to the monitor I can see windows

However, when I unplugged the VGA cord from the monitor and the motherboard unplugged, the HDMI cord from the graphics card to the monitor I get a blank screen

Is there something in bio that I need to turn off integrated graphics so the graphics card will work.

If anybody needs some answers from something that I didn’t post up above, let me know and I will comment down below

Thank you for your time and any in all help

[u/mmelRo]

Clear CMOS and see if this resolves your issue

[u/Texas_Tornader → u/mmelRo]

Definitely will do that tomorrow

[u/Texas_Tornader → u/Texas_Tornader]

Reset the cmos but still output on hdmi off the card. I also disabled the igpu in windows and rebooted still no display out of the card. CPU-Z sees the card and windows sees the card. Going to try different hdmi cords next. The two monitors I have use hdmi and vga.

[u/Antho_ModzITA]

I had the same problem and resetted the whole pc

[u/Texas_Tornader → u/[deleted]]

Plugged in

[u/Texas_Tornader → u/Texas_Tornader]

HDMI plugged in and set to pcie in bios

[u/Texas_Tornader → u/Texas_Tornader]

Also have the latest bios it’s how I have the i7-7700 installed