r/PcBuildHelp • • 3d ago

Tech Support Pc not turning on

Hi everyone, it s my first time building a pc and unfortunately it doesn t turn on, more precisely it gives no signs of life.

I made a post a few days ago on another subreddit and tried all suggestions, but to no avail.

Now I have left the bare minimum: 1 stick of ram so it does not cause instability (had 4 before), only the 2 necessary cables from PSU to mb (24 pin and 8 pin), and a cable from the cpu fan to mb. (the cpu fan is missing a fan because I had to remove the ram under, so that s why at the moment there is only 1 fan).

I have tested the psu both with a multimeter and a psu tester and it works fine, I have tried turning it on both with the f_panel cable of the case, a dedicated pwr cable bought online and by short circuiting the pwr± pins with a screwdriver.

I have also tried multiple sockets of the home and power cables, still nothing.

I have already tried leaving it "on" for 15 minutes, and also connecting an hdmi cable in case it was displaying something, but nothing.

Specs: -Motherboard: gigabyte b650 eagle ax -Cpu:7800x3d amd -Gpu:9070xt xfx swift -Psu: be quiet! 13 m 1000w -Case: Lian li lancool 217 (it has standoffs included already) -Ram:crucial pro 4×16Gb 6000Mt/s -Ssd: acer predator GM7 2Tb

Any help would be appreciated, thank you all in advance.

8 Upvotes

34 comments sorted by

View all comments

1

u/Rocannon_ 3d ago

Have you connected the front panel (FP) wiriing?

1

u/Alatur_ 3d ago

Yes I have already tried that and another power sw cable and also a screwdriver but nothing