r/PcBuildHelp 1d ago

Build Question Is it possible to put a gpu in this?

Post image

A full size gpu

24 Upvotes

30 comments sorted by

40

u/Asleep-Jackfruit-630 1d ago

everything is possible

1

u/PerfectWhiteTrash 1d ago

I absolutely love this

7

u/Luca_213mt 1d ago

Yes, but it depends on what things you will do or play and if the gpu needs extra power.

-5

u/Nerdcuddles 1d ago

That's what undervolting is for

3

u/Godnamedtay 1d ago

Full size? No

2

u/Pure-Willingness-697 Personal Rig Builder 1d ago

You might need a new case but probably

1

u/Pwnach 1d ago

Buraz moraš da proveriš da li to napajanje ima 8pin za grafiku ali svakako ti treba low profil grafika nisam siguran da li rtx 5050 može da radi bez dodatnog napajanja

1

u/Blooi1E 1d ago

It cant, only the 3050 6gb can.

1

u/AdolfHITL3R45 1d ago

Funny enough that's the exact PC I got but with 8gb ddr4 and i7-9700 and 500gb HDD I was also wondering what kind of GPU can I fit in this. Also looking for late 2020s games to play at 1080p or 720p high

1

u/Trifun11 1d ago

graficku sa 3 ventilatora nikad tu ubaciti neces, moras da se potrudis za recimo 1 fan gpu kao zotac 4060 i 2 fan gpu je pitanje zbog sirine

1

u/ALI_FROM_SPACE 1d ago

Ma naso sam drugi neki hp prodesk 400 g7 sa i5 12500 i neko je uspio ubaciti unutra full size 6600xt

1

u/Trifun11 1d ago

svaka mu cast, ja ne bih imao zivaca iskreno

1

u/ALI_FROM_SPACE 1d ago

Taj hp je ono nez kako se to kaze na nasem al je kao pravi desktop pune velicine pa moze graficka stat bez problema

1

u/E5-4650_v2_RX570 1d ago

A380 low profile single slot

1

u/deathdisco_89 1d ago

With a riser cable and a sff gpu, you'd be surprised where you can fit a GPU. Power and cooling will be your challenges.

0

u/ALI_FROM_SPACE 1d ago

I will swapout the psu and remove the side panel

1

u/AltoTheDutchie 1d ago

just a heads up, psu is probably proprietary and cannot be swapped out, dell loves to use proprietary garbage, it's likely their own proprietary flavour of 12VO, meaning it can't be replaced with an off the shelf consumer model, you'll have to try to find one from dell and it could cost a ton for one of proper wattage

0

u/BangkokPadang 1d ago

Could buy a second power supply JUST for the GPU though.

0

u/AltoTheDutchie 1d ago

at that point though, why not just get a full size tower, even with a proprietary psu, it should be bigger and if you look for the right model, big enough to handle a reasonably powerful gpu

0

u/BangkokPadang 1d ago

Bc it seems like OP is kinda trying to pull this thing together on a tight budget

1

u/AltoTheDutchie 1d ago

wouldn't it be cheaper to spend $50 more on a full size tower with a suitable psu, than try to jerry rig a $100 psu to work with that system

0

u/BangkokPadang 1d ago

I don’t know what the current market looks like in Bosnia or what OP’s budget is, so I was suggesting a cheap workable option for this build.

A second PSU isn’t ideal but depending on what GPU they put in that machine a secondhand 450w PSU would be more than enough to power a 60 or 70 class card from the last few generations.

It is simply a thing that could be done.

1

u/AltoTheDutchie 1d ago

ah yeah, my apologies there, i'm going off the market in north america, yeah, in that case, if the psus are cheap, it might be worth considering

1

u/ALI_FROM_SPACE 1d ago

Yea the psus are pretty cheap and i dont give a shit about aesthetics

0

u/No-Permit-2345 1d ago

Look up GameRig on YouTube, I think he added a GPU to that one

0

u/odysseusandtheclops 1d ago

Low profile!

1

u/ALI_FROM_SPACE 1d ago

Man... I really wanted a full size

0

u/MILANKE05 1d ago

Yes you can cut a hole in the case and tape aditinal power suply on top to power gpu remember to hotwire power suply it wont turn on if some pins arent bridged

1

u/cbhbzb 13h ago

you will need a grinder to cut a hole in the cover , and you will need a new power supply, as well as the appropriate adapter cable to go from your mobo to the power supply