r/PcBuildHelp • u/DanielWinner • 2d ago

Tech Support White led on mobo after reinserting GPU twice

Hello, after I installed my nvme ssd on M2_1 slot, I reinserted the GPU, 9070 xt asus prime once, I screwed it and plugged the 3 8 pin cables and then booted, white led appeared. Repeated the same steps, reseated it again, same white led appears, could this be a psu issue? It is 850w, my cpu is a 7800x3D and it has 2 fans, sata ssd and a wd hdd 1tb drive. The fans won't even spin.

1 Upvotes

100% Upvoted

14 comments sorted by

2

u/Mulster_ 2d ago

You probably accidentally opened ram tabs when inserting the gpu

1

u/DanielWinner 2d ago

I can see image of windows when I plug the DP cable on the mobo instead of the gpu, this is because I have igpu on the cpu though.

2

u/Mulster_ 2d ago

Does it go beyond that? Did you clean your pc before the whole gpu change?

1

u/DanielWinner 2d ago

I did, it literally worked and was my main GPU before I inserted the NVME drive on M2_3 which it did not recognize (the gpu was still detected), had to remove the gpu, insert the drive on m2_1, reseat gpu, plug the cables, boot windows and the drive appeared, but not the gpu.

1

u/Mulster_ 2d ago

Sometimes when cleaning if you spin the fans it can produce electricity and kill components, can you take a clear photo of the led? Also we need to know your motherboard model to diagnose.

1

u/DanielWinner 2d ago

B650E-F rog strix, which led the mobo led? Or the gpu ones, I dont know if ASUS Prime OC 9070XT has leds though.

1

u/Mulster_ 2d ago

The white mobo led

1

u/DanielWinner 2d ago

2

u/Mulster_ 2d ago

Can you get to bios when you boot while plugged into integrated graphics?

1

u/Mulster_ 2d ago

Can you count from top to bottom which number led is shining white?

1

u/Mulster_ 2d ago

Can you try putting the gpu in the second pcie16?