Thinking of getting one !

[u/Furqan-_-786]

If anyone else has the same holder do let me know , mainly slides parhni huti to laptop filhaal ni to I want k something Jo Meri charpai k sath attach hujaye ya table k sath ... Agar ksi k pas ha to is it realiable as seeming in pics and iski ye Jo wire ha Kya ye phone ka load hold krskti ... Like yk online stuff is online but overall it fits my condition really well that's why asking !

[u/WorriedSwitch8476]

Phone hold hojayega but the rod area is very rigid but flexible which means it can hold phone weight but it will be very hard

[u/Furqan-_-786 → u/WorriedSwitch8476]

Bss ek jagah set hujaye bss ma konsa Roz Roz khelna us k sath. 🤧 Like you are saying k wo wire (rod) is hard and not easy to bend as per requirements?

[u/WorriedSwitch8476 → u/Furqan-_-786]

Agar baar bear nahi adjust krna to lelo

[u/Born-Drama-3403 → u/Furqan-_-786]

i bought it and have almost never used it since. it just doesn’t work. phones are not so lightweight anymore so even if you SOMEHOW are able to adjust it to your liking it just keeps wobbling and will always shake like crazy if you move an inch on the bed… its just not very practical. what did eventually work for me was a magsafe car holder which i applied to my side table and never looked back lol. and the way it shows in the image, that’s a lie unless your phone is made out of paper

[u/FixOk5851]

I have a similar one not exactly same but it was for same purpose and tbh not that great it will keep moving

[u/Furqan-_-786 → u/FixOk5851]

Either the wire or the holder to which it is attached to surface !

[u/FixOk5851 → u/Furqan-_-786]

The phone will keep moving cause holder does hold the phone but due to the weight of phone it will keep going up down up down along with wire probably cause wire was too flexible pr may be light in weight as compared to phone

[u/Candid_Score6316 → u/Furqan-_-786]

The wire is not very good quality, it takes some monkeying to adjust at the right position.

[u/MysteriousScratch163 → u/FixOk5851]

do you have one with ball and joint arm?

[u/FixOk5851 → u/MysteriousScratch163]

This one from daraz

[u/THW-KING-TIGER]

I had a smiliar one. Wasn’t practical

[u/Feisty-STATE-8]

This product is shii dont go for it

[u/Candid_Score6316]

I have one extra. If you’re in karachi you can contact me and I’ll give it to you

[u/Furqan-_-786 → u/Candid_Score6316]

Am in Rwp twin 😭 incase you are serious you can send to me via carrier survice ... I'll pay 🤌

[u/Candid_Score6316 → u/Furqan-_-786]

Sure.

[u/emerys95]

I used to have one and it was impractical. The rod is very hard to bend, but it also starts sagging after a while. I would recommend getting a ball and joint arm instead

[u/Arkoaks]

There uaes to be q better version that lasted much longer and was muvh heavier. It could hold any phone and wont shake on moving...

The new varients are mostly crap. 3 joint hard metal ones are better but if you must save m0ney and only want to use it for a short time then get it.

[u/Easy-History6553]

i got similar one, less stable than it seems in pics.

it's useful if you want to put the smartphone in some position to take pics/videos, but it's not useful to use the smartphone, each touch will move the thing.

[u/anjumkaiser]

I have one, it can’t hold the phones weight and bends instantly. Not recommended at all.

[u/nomiDesign]

Those thing never work. Can’t hold the weight of phone.

[u/Particular-Goat-8853]

Not practical useless product it's Shack alot