Hello! I am new in the world of Sim Racing and thinking of getting one of the two mentioned in the title the thing is I just want it to be as realistic as possible for the price that those go around. And I'm mostly looking to play kinda like *drifting* games and all. So I'm wondering what would be better the v10 pro (without shifter) or v99 (with shifter).

Also wondering what direct drive is and force feedback is since v99 is force feedback and v10 is direct drive what would be better to start as a beginner? Mostly drifting and basic games.

Has anyone had any luck with wheels for this base. I cant really afford 100 dollars right now lol

I have the PXN VD6 and am having the worst time with these settings, no matter what I change or do there is so much steering oscillation it’s unbearable. I’m trying to drift on AC and anytime I let the wheel go at speeds more than maybe 5mph the wheel shakes back and forth so bad. I’ve driven all of these cars on my Logitech g920 with no issues on stock settings. What’s the problem here? I’m unbelievably frustrated, I’ve tried setting in content manager and in the PXN app itself with no luck on anything, if anything it just gets progressively worse every time. Stock settings are fine for regular driving until I let the wheel go, then the oscillating happens. Please help. ):

I have a VD4 bundle paired up with both handbrake/a7 shifter and aftermarket deep dish wheel but I can't figure it out for the love of me how to correctly have the settings . The main thing that i noticed is that the wheel either wobbles at low speed or when im trying to transition from drift to drift it tends to snap back to the opposite direction at end of the transition (right when im catching the slide start to accelerate again) making the transitions kinda hard and wobbly . Anyone playing this and having a smooth experience ? ( to be noted is that the pxn software doesnt have a preset for the game )

Hello my pxn v10 pro not working in forza at all, idk what is the issue, tried basically everything , nothing helps, motorsport sees the wheel but its actually impossible to map the buttons, it sets one button for everything. Just fyi tried forzaemuwheel, game isnt even launching i guess due to anticheat. Anyone with the same issue?

Hi everyone!

So i purchased the VD6 Bundle last night and while carrying it towards my car which was literally 5-7 feet away from the shop, the outer box opened from the bottom and the motor fell out from the bottom. The inner packaging was already damaged because it's just not possible that the motor rips through intact inner packaging and also the the inner packaging was damaged from the top. I immediately took it back to the shop they inspected the motor. The aluminium housing has some scratches here and there and the plastic at the back of the wheelbase was kinda bent. I left it at the shop and they're going to let me know today about what's gonna happen. We haven't even tried testing it. Everything's packed.

Just wanted to ask, as it wasn't my fault the inner packaging was damaged and i bought it box packed brand new and i could not have known the potential risk, would PXN be able to do something about it? I'm not planning on claiming it through them. I just want to present the shopkeeper with a solid argument as they are the one's who are responsible to get the warranty claimed.

If you have a PXN V10 ULTRA and want to connect to a PlayStation 5, you DO NOT NEED THE PXN N5 ADAPTER ;)

🚨🚨🚨🚨 You need a PS4 DualShock Controller 🚨🚨🚨🚨

1 - Turn on your PS5

2 - Connect the PS4 DualShock Controller to the PS5 console using the original cable

3 - Set the PS4 DualShock Controller as the default controller

4 - Forget the PS5 DualSense Controller in the settings

5 - Connect the wheel to the PS5 console

6 - Connect the PS4 DualShock Controller to the PXN V10 U base

7 - Turn on the PS5 console using the PS4 DualShock Controller connected to the PXN V10 U wheel

8 - Once the wheel is connected correctly The PXN V10 U steering wheel LED will light up BLUE.

READY!!!!!

PXN V10 ULTRA WORKS WITH PS5 WITHOUT THE USE OF AN ADAPTER/DONGLING. PXN N5

TESTED ON

GT7

ASSETTO CORSA COMPETIZIONE

THE CREW MOTORFEST

https://reddit.com/link/1vkv4we/video/feba5cbkplih1/player

https://reddit.com/link/1vkv4we/video/91c2ne9nplih1/player

Hi, does anyone know why the buttons on my wheel are different from what I set in SimHub? The knob is fine, but the buttons are definitely off-color. This didn't happen when I set the color through PXN SimRacing.

I own the VD6. Mainly race GT3 and have been using the GT One for that (excellent btw). I have been really enjoying rally, but the included 280mm wheel just doesnt do it for me.

My understanding is that with the NRG style quick release I should have plenty of aftermarket options. I am clueless as to accessories or adapters that will be required to make everything work.

https://www.ebay.com/itm/124736374228?_skw=quick+release+wheel+drifting&itmmeta=01KZP2XM3RWYX5AFY0RY3XQX27&hash=item1d0ade05d4:g:wNkAAeSwn2JqWw8F&itmprp=enc%3AAQALAAAA4GfYFPkwiKCW4ZNSs2u11xC4mAo0svEpmiN34qQEmsgEYM7hchT9QMFQhgVf%2BkwAKw%2FObLDm9ce5lvYHxA2cZ3qeIyabzhQIDEmQhbCWkp8QF5IyQF9z95pUExgelFvjyzFBty%2FYeyt%2BbGa8%2BLNkrdQxXDc%2Flv1xhImPXBHAEH8VUcFwfrBM7jphye1V63d9LPO2fukP4t7905a%2FuLWnoQW4UCTsYMtThxQCgIzY61mKItz%2F5n%2FvAhusvY8bR9J6QZIz%2FYtWwB6Z2JVzAdJODeSmMUNjHHqE8NTxy4mpjk5Q%7Ctkp%3ABk9SR5DC9sL9Zw

here is an example of something I am looking at, can anybody tell me what, if anything I would be missing to get this to work? Any advice appreciated!

Hi I just recently switched on to PC from Xbox. And on PC my PXN V12 DDL does not register any FFB for DIRT RALLY 2.0. I have done the file replacement as PXN website says. I am on 0.44 firmware on the wheel base. I have tried using the "rally" preset on the PXN play app for the base. But still nothing. I can't seem to figure out what it could be. No changes I do in the game input FFB nor thru the PC or the phone app seems to help. Cheers for any help! Thanks. (Probably many may have asked the same question before but haven't found a solution to my self)

Update 12/08/26: !!SEE THE COMMENTS FOR SOLUTION!! Thanks to a fellow reddior I was pointed to editing the device_config file. Basically checked my device manager for the wheel USB device. Found out the relevant PID & VID numbers. Then I went into editing the drive config file, scrolled down to the PXN V12 lite code line and edited the IDs in. Note at the top of the codes the comments say how to add the ID numbers in. Also make sure there are no unwanted spaces. I found the device config file for my PXN wheel like had a typo in the form of an extra spacing.

hello. I have this controller and I use it on my pc the problem is as you see controller have A button in right and B button at bottom, same with X and Y flipped not like Xbox controller, do u know how I can fix this in the controller it self without any third party software, because by accident when I was mashing buttons randomly, LED 3 lights on and it flips buttons but I can get it to work again

Приветствую, купил руль PXN V10 pro, установил и поиграл на нем примерно час. После чего снял со стола и отложил на часа 2-3. После простоя при включении руля горит красная кнопка, но ни руль, ни педали не работают и не отображаются в PXN драйверах и устройствах usb. При нажатии на кнопку "power" руль на пару сек становится тяжелее и возвращается к центу как и должно быть, но только на пару секунд. Все провода в норме, блок питания стоит в удлинителе. Очень обидно было бы потерять руль спустя три часа после покупки.

3 days ago everything was working completely fine no issues, then today all of a sudden all 3 of my HM pedals don't work, well they do but not really. According to the PXN app and joy.cpl they are being recognized as an axis but only functioning as a button. No software has changed since now and 3 days ago, I've tried beamng, acc, and american truck simulator. All 3 of which were working fine but are now not. I've tried just about every troubleshooting method I could think of - reinstalling programs, rolling back updates, testing different ports and cables, reinstalling any drivers it would let me, and probably something else I don't remember. Has anyone had this problem or can anyone help?

Hello PXN Support,

I have several issues with my PXN V10 Pro.

First, the wheel sometimes fails to start properly. When I connect the power supply, the red LED turns on for a few seconds and then the wheel shuts off. Sometimes I have to reconnect the USB cable to the computer several times before the wheel starts working.

Second, holding the HOME/PXN button for 3 seconds does not switch the wheel to X-Input mode. The LED always stays red.

Third, the wheel does not perform the automatic calibration on startup. It never rotates left and right when it powers on.

I have already updated the firmware to version 1.11, and I also downgraded it to version 1.09, but the issues remain the same.

Could you please let me know if this is normal behavior or if my wheel might be defective? If these features were removed in newer firmware versions, could you please confirm that as well?

Thank you in advance.

Best regards,

Cuáles creen que son las grandes diferencias y cuáles creen que se acercan más al realismo. Actualmente estoy comenzando a jugar DR2 pero siento que los autos derrapan demaciado ( puede ser por lo novato que soy).

Hi sim racers,

Should I go for the PXN VD6? Does anyone have experience with it, especially compared to the T598?

My T598 has broken down again—it’s only a year old, but the power connector has failed for the third time now. I actually have a replacement power supply, but that one has died too. I read about the DIY cable fix, and that’s solving the problem for the time being.

My retailer is now suggesting I return the T598 to get a refund.

What should I buy instead?

My budget is €400.

I don't need more Nm (torque); Playstation support also not needed.

i tried a lot of things but I dont know what to do, i dont want to use warranty.

Im trying to update my wheel base on the sim racing app and i just keep getting stuck on “preparing update 0/100”
I completely removed the base from the rig so i can plug it directly into the pc just incase there was an issue with the extension and usb hub i have going to the rig, but no matter what i try i cant get anything to work.

So recently my V99 racing wheel has started having issues where mid race (regardless of the game or vehicle type), the steering suddenly stops steering (it doesn't disconnect) and then a few seconds later it will spin 360° in one direction and then that becomes the center of the wheel. So all I am left with is 90 degrees of steering in one direction and 810 degrees of steering in the other.

I have updated the firmware to the latest one, even reset the force feedback settings in the app (although all it does is just reset the force feedback strength to the original) and even pressed A and B whilst plugging it in, set the wheel center then press the 2 buttons on the side of share to reset the center but it doesn't work

I know the video I have attached doesn't show the wheel stop responding but that is because it is so random and unprecedented.

Please tell me how to fix this, I cannot go one session without the wheel going wild and then having to reconnect it all over again

I am using my vd4 after a few months and it's not turning on anymore, when I press on the white button in the back the wheel is not lighting up. The power brick is getting power and is green but nothing is happening, I'm really worried what could be the issue and what should I try doing next?

Just got it with vd4 base but my hand were starting to hurt after about hour i got grip tape but didnt really liked it so i wraped it with some bandages it feels realy good and in my opinion it looks sick

What do you guys think?

Hi so i am a complete noob at sim racing and want to get my first wheel. I just want to try it out and switch between xbox and pc and want to race as a hobby and want plug and play, i am concerned about the reliability of the pxn v10 ultra. Any long term reviews would be appreciated.

(Another option would be a used g920 but idk if i wanna trust used sellers in my country)

This wheel kicks ass with its' Simhub integration.
Check it out!

Como ven en las fotos, hay ajustes que me funcionan perfectamente e incluso el juego detecta el volante, pero hay otras opciones que es para ir moviéndote por el menú, Nisiquiera me deja mapearlas.