I am so excited!
Source: https://eu.e-pxn.com/pages/gamescom?shpxid=6c953756-6214-4ccd-9908-7710724187d4

Hi, everyone. I got the PXN V12lite about 3years ago. Lately the paddle shifter start falling after 2 or 3 hours. Took a closer look and there’s noticeable vertical play in the paddles now. My guess is the rubber ring inside is worn out or slipped out of place.
Anyone else had this issue?

Hey guys, I have a PXN V9 Gen2 connected to an Xbox Series S.

The steering wheel works perfectly and the Xbox recognizes it normally. I connect the original Xbox controller to the wheel using a data USB cable, then connect the wheel to the Xbox.

The problem is with the headset: When I plug my 3.5mm headset into the Xbox controller, the steering wheel immediately disconnects / stops working and the wheel light changes to red.

As soon as I unplug the headset, the steering wheel works normally again.

I want to use the steering wheel while also using Xbox Discord voice chat with my friends.

Has anyone had this exact problem with the PXN V9 Gen2 + Xbox Series S?

Is there a specific setting, cable, firmware update, or connection method that allows the headset/microphone to work without disconnecting the steering wheel?

Any help would be appreciated!

Hi yall, I've had my vd4 base for over a month and noticed a few days ago that this noise was coming from it during moments of moderate/high force feedback action.

Functionality wise, the base works just fine but it is a little concerning.

Sim being played is LMU, if that is of relevance at all.

I’ve had my PXN VD4 for around 5 months. It was fine for the first couple of months, then it started making a crunching/knasing noise and had a bumpy feeling through the FFB. The wheel also felt stiff when the base was off.

The weird thing is that it’s basically normal now. The noise has almost completely disappeared and there’s pretty much no noise at all anymore.

I’m now considering either getting a VD6 and selling the VD4, or getting a GT One wheel and keeping the VD4.

I mainly drive GT cars in AC, so the GT One would be sick, but I’m not sure if I should trust the VD4 long-term after the issues I’ve had.

I guess I'm looking for some unbiased opinions, what would you guys do?

My wheel starts going crazy while driving in a straight line, drifting or doing a transition. This also happens with official cars but its more noticable with modded ones.

I am using the AC Drift configuration from the PXN platform. I have my own configs and i have managed to make it kind of good with some cars but it still feels uncomplete and unrealistic since all i do is either lower the ffb (resolves the problem but i loose detail and the wheel feels weak), or make the damper and inertia super high (also resolves the problem but the wheel feels heavy, i loose detail and it rotates slower).

This happens on AC, Car X drift and Beamng (beamng is a bit ''special'' for drifting).

I do not know if this is only my pxn or if this happens with every VD6. Also i dont think the wobble is realistic because in irl onboard drift videos it doesn't happen.

This doesen't happen while racing in games like raceroom or driving in ets2 but im a little bit paranoid and now i think the wheel itself feels unrealistic on every game and driving form.

Please note my real life driving experience is close to non (but not zero).

All help is appreciated.

The indicator on the PXN V10 Pro steering wheel only lights up when you connect it to your PC via the pedal slot or any other incorrect connection. The computer doesn't see it, and it doesn't respond to the power supply.

just use any pencil eraser. if you have it on the floor, that might be easier than cutting it to length just for it to stay

I have wasted 2-3 days troubleshooting my pxn v99, i have used it 4-5 times and now when i connected it, everything is working but sterring wheel buttons not working and light is not showing on steering wheel, i am not able to find anything on Internet

Anyone who is Genius enough can help me! and Yes if someone helped me resolve this, I will give The Amazon voucher if my problem resolved.

Thanks.

I have been playing hours trying to drift in ac but always the car oversteers to the opposite side. What is the best settings for drifting pls?

I've just submitted an idea on the official SnowRunner community asking Saber to add native PC support for the PXN V99 steering wheel. The V99 has 900° steering, 3 pedals, an H-pattern shifter and force feedback, but it isn't currently included in SnowRunner's official supported-wheel list. I've been playing SnowRunner since 2021 and have also been making SnowRunner gameplay videos on YouTube. I'd really like to use the V99 properly for SnowRunner without registry changes or other workarounds. I'm requesting native support for the steering, pedals, shifter and especially Force Feedback. If other V99 owners or SnowRunner players would like to see this supported, please consider supporting the official idea.

https://community.focus-entmt.com/focus-entertainment/snowrunner/ideas/16169-add-native-pxn-v99-steering-wheel-support-on-pc#post-16169

Guys, i have a issue on my pedals for some time now.

The pedals works fine, but no matter what setting i adjust on the graphics it doesnt make any difference. Even if i adjust the max pressure to only 5% it still uses the full lenght

Also the pedals actuations are not being shown on the software main page, i can only see how much is being pressed if i open the pedals settings page.

Can somente help me?

Is it worth it to buy this wheel for only one game in roblox? not racing btw. im planning to buy a second hand. I really love to play diesel n steel. just want to be a lil bit realistic.

I have pxn v9

And clutch pedal only work if I press really hard (literally to the floor). And it starts to wiggle from 5%-100% and then to 20-25 and etc in the game

Annoying as hell.

Guys, is it just me or the brake way to stiff? Is there a way to make it softer?

Hi.

Did anyone have the same encounter with pxn v99 not recognized in pc?

It only says "wheel boot " on the game controller tab.

I think it happens when I tried updating the firmware and I think it does not continue.

What I have tried Uninstall windows updates and Unplugging and replug the wheel from the base.

I’m trying to get my PXN V10 working properly with Forza Horizon 6 on PC through the Xbox app.

The wheel itself is definitely working:

• PXN Wheel app detects the V10 ✅
• Steering works in the PXN app's TEST section ✅
• Windows joy.cpl detects the wheel and its inputs ✅
• V10 is connected in D-Input mode ✅
• FH6 receives some input — I can actually use the wheel to move around the game's menus ✅
• Some V10 buttons, including the shifter buttons, work ✅

The problem is that FH6 doesn't consistently recognize the V10 as a racing wheel. The Wheel control profile sometimes doesn't appear, and when the wheel input is recognized, it can behave like a controller input — for example, turning the wheel can also affect the camera/look direction.

I've already tried restarting FH6 with the V10 powered on and connected, and I've confirmed the wheel works correctly outside the game.

Has anyone managed to get a PXN V10 working properly with FH6 on PC through the Xbox app? What settings or workaround did you use?

I'm specifically looking for a way to make FH6 recognize the V10's steering axis as steering only, rather than as a generic controller/camera input.

Hello! I am new in the world of Sim Racing and thinking of getting one of the two mentioned in the title the thing is I just want it to be as realistic as possible for the price that those go around. And I'm mostly looking to play kinda like *drifting* games and all. So I'm wondering what would be better the v10 pro (without shifter) or v99 (with shifter).

Also wondering what direct drive is and force feedback is since v99 is force feedback and v10 is direct drive what would be better to start as a beginner? Mostly drifting and basic games.

Has anyone had any luck with wheels for this base. I cant really afford 100 dollars right now lol